Minka Lavery 1975-1-138 Installation Guide
Contents
1. INSTALLATION INSTRUCTIONS For Model 1975 1 138 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE BACKPLATE Fig 1 4 1 Shut off the power at the circuit breaker and remove old fixture including the crossbar 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation 3 Attach the crossbar A to the outlet box using two outlet Box Screws B The side of the Crossbar marked GND must face out 4 Insert the threaded studs provided about 1 4 into the fixture mounting plate A Align the studs with the holes in the fixture F Tighten both Ball Nuts D CONNECTING THE WIRES Fig 2 1 Atthe point connect the electrical wires as follow Connect the black wire from the fixture to the black house hot wire Connect the white wire from the fixture to the white neutral house wire Make sure ali wire nuts are secured You may wrap the connections with electrical tape If your outlet has a ground wire green or bare copper connects fixture s ground wire to it Otherwise connect fixture s ground wire directly to the crossbar using the green screw provided MOUNTING FIXTURE AND SHADE 1 After the wires are connected tuck them carefully inside the outlet box as you place the back plate F over the nipple C Secure the back plate F against the wall using Knurled Cap2. D 2 Install glass shade E by referring to fig 1 3 Install light bulbs in accordance with fixtures specification DO NOT EXCEED MAXIMUM WATTAGE RATING Your installation is now complete Return power to the MIN 90 C SUPPLY CONDUCTORS
Download Pdf Manuals
Related Search