Minka Lavery 4393-77 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTIONS Item 4393 77 573 New 01 12 2011 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Fig 1 1 Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration 2 Shut off power at the circuit breaker and remove old fixture including the mounting hardware 3 Position Mounting Plate B on the wall and mark location of two mounting holes Drill the hole on the wall Insert the Plastic Anchors K into the wall 4 Attach the Mounting Plate B to the Outlet box A in the wall using the two screws C The side of the mounting plate marked GND must face out 5 Place the Wood Screws L through the hole into the Plastic Anchors K secure the Mounting Plate B CONNECTING THE WIRES Fig 2 6 At this point connect the electrical wires as shown in Fig 2 making sure that all wire connectors are secured If your outlet has a ground wire green or bare copper connect the fixture s Ground Wire to it Otherwise connect the fixture s Ground Wire directly to the mounting plate or Reinforcement Plate using the Green Screw provided After wires are connected tuck them carefully into the outlet box y ts R i Co i ary x Botis THE INSTALLATION Fig 1 7 Piace Fixture Body F over Mounting Plate B fasten with Screws D by using Allen Wrench E provided S 8 I2. nstall light bulbs G not included in accordance Neutra rouno with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING 9 Place the Metal Plate K and Glass Panel J into Metal Frame M and secure with Plastic Washer l and Screws H 10 Secure the Metal Frame M onto Fixture Body F _ association by using Screws G Intertek Your installation is now complete Return power to the outlet box and test the fixture Note Illustration Fig 1 on this manual is for installation purposes only It may or may not be identical to the fixture purchased LA 1900E
Download Pdf Manuals
Related Search