Minka Lavery 4134-84 Instructions / Assembly
Contents
1. Align canopy D onto mounting screws A and secure with finials E 7 Install the light bulbs Included in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE NE PAS DEPASSER LA Fa 2 PUISSANCE NOMINALE MAXIMALE g l l SE FIXTURE 1 WIRES Green or Bare 1 Copper Ground FIXTURE WIRES Your installation is now complete Return power to the Black outlet box and test the fixture FIXTURE WIRES White HOUSE WIRES Green or Bare Copper Ground l l l l Neutral l association2. INSTALLATION INSTRUCTIONS FOR 4134 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER _ AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR READ AND SAVE THESE INSTRUCTIONS ASSEMBLING THE FIXTURE Fig 1 1 Shut off the power at the fuse box or circuit breaker box If necessary remove the old fixture including the Set A 016 mounting hardware Crossbar 2 Carefully remove the new fixture from the carton and Ground screw check that all parts are included as shown in the Mounting screw 2 Junction box screws 2 illustration 3 Thread the rod F onto the nipple G MOUNTING THE FIXTURE Fig 1 4 Thread the two mounting screws A Size 8 32 1 2 L part way into the crossbar B Secure crossbar B to the junction box not provided with junction box screws C Size 8 32 0 6 L The length of mounting screws A into crossbar B may be adjusted if necessary The side of the cross bar marked GND must face out CONNECTING THE WIRES Fig 2 5 At this point connect the electrical wires as shown in Fig 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the mounting plate using the green screw provided After the wires are connected tuck them carefully inside the outlet box COMPLETING THE INSTALLATION Fig 1 6
Download Pdf Manuals
Related Search