Minka Lavery 950-126 Installation Guide
Contents
1. 9 Connecting center part D to part E and turn clockwise until firmly tightened 10 Connecting canopy B to part D and turn clockwise until firmly tightened 11 Then cover the junction box with canopy B aligning the Screw of mounting plate with the hole of canopy and lock it with brass ball C 12 Place Shade I onto the socket of fixture body H then secure it in place with Screw Shell K and ring J securely tighten Your installation is now complete Return power to the junction box and test the fixture Fig 1 LN Junction Box X Ceiling Green Screw Mounting Strap GND Studs A Junction Box Screw ee B gi D B E B F G f ay ___y a I mm Fig 2 e gt FIXTURE FIXTURE FIXTURE WIRES WIRES WIRES Black or White or Bare Smooth Ribbed WIRES White Neutral 2A Copper HOUSE Ground H W ia JOUSE IRES Green or Bare Copper Ground american lighting association2. INSTALLATION INSTRUCTION FOR 950 126 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Fig 1 1 Shut off the power at the circuit breaker box Remove old fixture and all hardware from Junction Box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation 3 Thread the two Studs A about 1 4 into the pre drilled holes in the Crossbar spaced the same distance apart as the holes in the fixture canopy B 4 Install the mounting strap to the Junction Box with the two Junction Box Screws as shown The side of the mounting strap marked GND must face out 5 While holding the canopy and lamp cluster towards the ceiling connect the electrical wires as Shown in Fig 2 making sure that all wire connectors are secured You may have to wrap the connections with electrical tape If there is a Ground Wire green or bare copper in your outlet box connect the fixture s Ground Wire to it Otherwise connect fixture s ground wire directly to the mounting strap with the Green Screw provided After wires being connected tuck them carefully inside the Junction Box 6 Connecting center part G to lamp body H and turn clockwise until firmly tightened 7 Connecting center part F to part G and turn clockwise until firmly tightened 8 Connecting center part E to part F and turn clockwise until firmly tightened
Download Pdf Manuals
Related Search