Minka Lavery 1182-357 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTIONS For Model 1182 1183 357 New 01 17 2003 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBLING THE FIXTURE Fig 1 1 Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration 2 Slide Glass Shade D along with Plastic Washer E and Iron Washer F over Pipe C then secure them using Nut A tightly 3 Connect rod side and shade support together by threading Nipple J into Coupling K HANGING THE FIXTURE Fig 2 4 Shut off power at the circuit breaker and remove old fixture including the crossbar 5 Thread Nipple into Loop until snug 6 Thread other end of Nipple with Loop attached into crossbar until snug 7 Place Lock Washer over end of Nipple protruding through crossbar and thread Hex Nut onto nipple until tight 8 Take this crossbar assembly and mount to ceiling junction box with junction box screws Tighten screws securely with screwdriver 9 By measuring determine correct number of links needed for proper hanging height 10 Use a pair of pliers to open one end link of the chain attach the chain to the fixture s loop and close the link Slip Loop Collar and Canopy over the chain Open the other end link of the chain and lift the fixture to attach to the ceiling loop close the chain link 11 Lace the fixture s wires through the chain links and pull until taut Feed the fixture wires through the loop and Nipple2. and pull until taut CONNECTING THE WIRES Fig 3 12 At this point connect the electrical wire as shown in figure 3 making sure that all wire connectors are secured If your outlet has a ground wire green or bare copper connect the fixtures Ground Wire to it Otherwise connect the fixture Ground Wire directly to the crossbar using the Green Screw provided 13 Tuck these wire connections neatly into the ceiling junction box and then raise the canopy all the way to the ceiling Raise the Lock Collar and thread onto ceiling Loop protruding through canopy 14 Install the light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING 15 Fig 4 Place the Glass Bulb Shields P over the Studs L located on the Support Plate N Place Washers M over the Studs L and tightly secure with Knurled Knobs O Your installation is now complete Return power to the junction box and test the fixture Junction Box Ceiling Hex Nut Lock Washer Crossbar Screw Loop Chain Canopy Lock Collar Fig 3 Faure Black or Smooth FIXTURE WIRES Cc i White or i Bare Ribbed Copper Ground HOUSE WIRES WIRES White Green Neutral Ground LA 685E
Download Pdf Manuals
Related Search