Minka Lavery 5352-593 Instructions / Assembly
Contents
1. Follow wiring instructions carefully see fig 2 b x 6 Mount fixture by aligning mounting holes in fixture back plate l with mounting screws and threading ball nuts B onto mounting screws 7 Attach the glass shade C onto the socket of the fixture body A and then lock it securely with the socket ring D 8 Install the light bulbs not included in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE Your installation is now complete Return power to the junction box and test the fixture Fig 1 Set A A 020 Mounting plate Ground screw Junction box screws 2 p 7 Box screw N A rixture Ground Wire a Outlet jal ee Supply wire Fixture Wire Mounting screw Mounting plate Supply Ground Wire Socket Ring w p SKT RING 26 The figure is only for reference Fig 2 FIXTURE FIXTURE FIXTURE l WIRES WIRES WIRES Black or White or Bare Smooth Ribbed Copper gt HOUSE Ground HOUSE ll american WIRES WIRES WIRES C US Black White Green or LISTE lighting Hot Neutral Bare Copper Ground Inte rtek association2. INSTALLATION INSTRUCTIONS FOR 5352 593 5353 593 5354 593 For Wall Mount Fixture WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR MOUNTING THE FIXTURE INSTALLATION Fig 1 1 Shut off the power at the circuit breaker and remove the old fixture from ceiling including the old crossbar WIRING Fig 2 1 Connect the electrical wires as follows Connect the black wire from the fixture to the black house hot 2 Carefully unpack the new fixture and lay all the parts on a clear wire Connect the white wire from the fixture to the surface white neutral house wire Make sure all wire nuts 3 Thread the two mounting screws into the pre drilled holes in the are secured You may wrap the connections with mounting plate spaced about the same distance apart as the holes electrical ae If your outlet eee has I P in the fixture back plate Attach the mounting plate to the green S oae copper connect fixture S eames tas 1 9 to it Otherwise attach the bare copper fixture wire to junction box using two junction box screws Size 8 32 1 2 L the green ground screw Size 8 32 3 8 L on the The side of the mounting plate marked GND must face out mno A F lat 4 Guide fixture wires through hole in center of mounting plate 2 Tuck the wire connections neatly into the wall junction 5
Download Pdf Manuals
Related Search