Minka Lavery 4740-206 Installation Guide
Contents
1. INSTALLATION INSTRUCTIONS FOR 4740 206 Read and save these instructions WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Installation see fig 1 1 Disconnect power at main electrical panel before installation 2 Thread the two mounting screws about 1 4 into the pre drilled holes in the mounting plate spaced about the same distance apart as the holes in the fixture back plate Attach the mounting plate to the junction box using two junction box screws The side of the mounting plate marked GND must face out 3 Guide fixture wires through hole in center of mounting plate 4 Follow wiring instructions carefully see fig 2 5 Mount fixture by aligning mounting holes in fixture back plate with mounting screws and threading ball nuts D onto mounting screws 6 Place the glass panel C and the glass shade A into the metal trim B 7 Install the light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Wiring see fig 2 1 Connect the electrical wires as follows Connect the Black wire from the fixture to the black house hot wire Connect the white wire from the fixture to the white neutral house wire Make sure all wire nuts are secured You may wrap the connections with electrical tape If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it Otherwise attach the bare copper fixture wire2. to the green ground screw on the mounting plate 2 Tuck the wire connections neatly into the wall junction box Fig 1 Fig 2 White or HOUSE Black WIRES Hot Smooth FIXTURE WIRES Black or Ribbed WIRES FIXTURE Bare Copper Ground FIXTURE WIRES Copper Ground HOUSE Neutral WIRES White Bare Green or WIRES HOUSE MIN 90 C SUPPLY CONDUCTORS
Download Pdf Manuals
Related Search