Minka Lavery 1961-243 Installation Guide
Contents
1. INSTALLATION INSTRUCTION FOR 1961 243 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Fig 1 Fig 2 MOUNTING THE FIXTURE Fig 1 1 Shut off the power at the circuit breaker box Remove old fixture and all hardware from Junction Box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation 3 Thread the two Studs A about 1 4 into the pre drilled holes in the mounting strap spaced the same distance apart as the holes in the fixture canopy B 4 Install the mounting strap to the Junction Box with the two Junction Box Screws as shown The side of the mounting strap marked GND must face out 5 Feed wire through G connecting center part G to lamp body H and turn clockwise until firmly tightened 6 Feed wire through F connecting center part F to center part G and turn clockwise until firmly tightened 7 Feed wire through E connecting center part E to center part F and turn clockwise until firmly tightened 8 Feed wire through D connecting center part D to center part E and turn clockwise until firmly tightened 9 Feed wire through B connecting canopy B to part D and turn clockwise until firmly tightened 10 While holding the canopy and lamp cluster towards the ceiling connect the electrical wires as Shown in Fig 2 making sure that all wire connectors are secured You may have to w2. rap the connections with electrical tape If there is a Ground Wire green or bare copper in your outlet box connect the fixture s Ground Wire to it Otherwise connect fixture s ground wire directly to the mounting strap with the Green Screw provided After wires being connected tuck them carefully inside the Junction Box 11 Then cover the junction box with canopy B aligning the Screw of mounting plate with the hole of canopy and lock it with brass ball C 12 Place Shade I onto the socket of fixture body H then secure it in place with Screw Shell J and ring K securely tighten Your installation is now complete Return power to the junction box and test the fixture White or HOUSE Black WIRES Hot Smooth FIXTURE WIRES Black or Bare Copper Ground FIXTURE WIRES Copper Ground HOUSE Neutral WIRES White Bare Green or WIRES HOUSE Ribbed WIRES FIXTURE
Download Pdf Manuals
Related Search