Filament Design 1000-07-06 Instructions / Assembly
Contents
1. Maintenance Accessories Do not use abrasive cleaners which may cut through the Emerson SW95 Speed Control can be used with this fan protective lacquer and possibly damage the finish use only a soft brush or lint free cloth to avoid scratching finish Do WARNING not use water when cleaning you fan as it could damage the motor or blades and create the possibility of an electrical shock A WARNING Do not use water when cleaning you fan as it could To reduce the risk of fire or electrical shock do not use the fan with any solid state speed control device WARNING Any control not specifically approved for this fan could result in fire shock and personal injury damage the motor or blades and create the possibili ty of an electrical shock A WARNING This product is designed to use only those parts supplied with this product and or any accessories designated specifically for use with this product by Emerson Electric Co Substitution of parts or acces sories not designated for use with this product by Emerson Electric Co could result in personal injury or properly damage WARNING FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN TROUBLE 1 Fan will not start Trouble Shooting PROBABLE CAUSE SUGGESTED REMEDY i Fuse or circuit breaker blown 1 Check main and branch circuit fuses or circuit breakers 2 Check line wire connections to fan and s2. flanges seat firmly and uniformly to the surface of the motor If flanges are seated incorrectly loosen the holder screws and retighten 5 Tighten the hanger bracket screws to the outlet box and or secure outlet box 6 Interchanging an adjacent side by side blade palr can redistribute the weight and result in smoother operation 5 Hanger bracket and or ceiling outlet box is not securely fastened Fan blades are out of balance
3. witch wire connections in switch housing 44 WARNING Make sure main power is turned off 3 Make sure reversing switch position is all the way to one side 2 Loose power line connections to the fan or loose switch wire connections in the switch housing Reversing switch in neutral position 2 Fan sounds noisy Blades not attached to fan Loose screws in motor housing 4 Attach blades to fan before operating 2 Check to make sure all screws In motor housing are snug not over tight 3 Check to make sure the screws which attach the fan blade holders to the motor are tight 4 Check to make sure wire connectors in switch housing are not rattling against each other or against the interior wall of the switch housing WARNING Make sure main power is turned off 3 Screws securing fan blade holders to motor are loose Wire connectors inside switch housing rattling 3 Fan wobbles Setscrew in collar mounting is loose or shakes excessively Tighten setscrew in collar mounting 2 Setscrew in hanger ball downrod assembly is loose 2 Tighten the setscrew In the hanger ball downrod assembly Screws securing fan blade flanges to motor are loose Fan blade flanges are not seated properly Check to be sure screws which attach the fan blade flanges to the motor are tight 4 Check to be sure the fan blade
Download Pdf Manuals
Related Search