Smart Solar 3740WR20 Instructions / Assembly
Contents
1. Introduction Solar lights work by using electricity generated by the solar panel to charge internal batteries These batteries are then used to power the light When switched on the lights automatically illuminate at night by using a light sensor The duration of illumination will depend on the amount of sunlight and therefore charge received by the batteries Contents Try Me switch g Solar panel can be used to stake solar panel into ground if Mounting clip not used with parasol can be used to clip the solar panel to a parasol umbrella Mounting tubes Spike How to use with parasol Mounting clip attaches the solar panel to the parasol Solar panel wire can be run along the inside or outside of parasol Smaller mounting clips attach each lantern to the parasol before clipping to material at the top Position Position solar panel to receive the maximum amount of sunlight x oy A Do not position the solar panel under a light as this will prevent the light from switching on at night First use First unplug the display switch used for the try me packaging Although there may be some charge left in the battery we recommend fully charging it before first use Leave the switch in the off position for 2 sunny days to ensure the battery is fully charged Once fully charged switch to auto the light will automatically illuminate when it gets dark You can cover the solar panel to test that the light is2. operating Unplug display switch Off Auto switch To light string Battery Rechargeable batteries become less efficient with repeated charge discharge cycles and the battery capacity reduces If you find that the battery appears to be less efficient or does not run for long we suggest you first try to boost charge it Switch off for 3 to 5 sunny days to allow the maximum charge to the battery If after this boost charge your battery still does not perform to expectations you should replace it All our batteries are covered by a1 year warranty To change the battery remove 4 screws and open the compartment as shown remove the existing batteries and replace with a new ones Only use Ni MH or Ni Cd rechargeable batteries Please ensure that the battery is disposed of according to local regulations Problem solving 1 Check the solar panel is positioned correctly 2 Check the battery and replace if necessary 3 If problems persist contact customer services using the details on the back page of this booklet Customer Service For immediate answers visit our website www smartsolar com where you will find extensive trouble shooting FAQs and support Alternatively contact us using the details below Email ussupport smartsolar com Tel 1 813 343 5775
Download Pdf Manuals
Related Search