Kenroy Home 92077WHNIK Instructions / Assembly
Contents
1. GREEN GROUND SCREW SET SCREW 11111 METAL RIN INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES IF YOU ARE NOT FAMILIAR WITH WIRING YOU SHOULD USE A QUALIFIED ELECTRICIAN THIS FIXTURE IS INTENDED TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE FIXTURE COMPLETE FIXTURE ASSEMBLY INSTRUCTIONS FIRST SEE PREVIOUS 1 ATTACH THE CROSSBAR TO THE CEILING OUTLET BOX USING THE TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 1 1 4 SCREWS PROVIDED THE MOUNTING HARDWARE PACKAGE 2 SLIDE THE METAL RING AND THEN THE CANOPY OVER THE 3 SCREW THE NIPPLE TO THE CROSSBAR 4 CONNECT THE WHITE FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTORS PROVIDED CONNECT THE BLACK FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE GREEN GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE CROSSBAR THEN CONNECT THE GREEN GROUND WIRE2. TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 5 TUCK THE WIRES CAREFULLY INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE 6 RAISE THE CANOPY WITH FIXTURE BODY TO THE CEILING AND SECURE IN PLACE WITH METAL RING 7 RESTORE POWER YOUR FIXTURE IS NOW READY FOR USE 10 2013 92077WHNIK INSTALLATION
3. MODEL 92077WHNIK PACKING DIAGRAM CANOPY CROSSBAR AND OTHER 5 IXTURE BODY ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT LADDER SCREWDRIVER ADJUSTABLE WRENCH WIRE CUTTERS UNPACK THE FIXTURE YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE CANOPY AND FIXTURE BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE MOUNTING HARDWARE PACKAGE CROSSBAR NIPPLE WITH SET SCREW METAL RING 2 8 32 x 1 1 4 5 5 AND 3 WIRE CONNECTORS FIXTURE ASSEMBLY 1 LOOSE THE SET SCREW ON OF NIPPLE AND ADJUST THE CORD LENGTH THEN SECURE THE CORD TO OF THE NIPPLE BY TIGHTENING THE SET SCREW 2 CUT OFF THE KEEP THE 12 LONGER THAN THE LENGTH THAT YOU WANT 3 SPLIT THE END OF THE POWER SUPPLY WIRE 3 1 2 FROM THE END AND STRIP THE PLASTIC COVER OFF THE WIRE ABOUT 1 2 4 INSTALL A 100 WATT MAX MEDIUM BASE TYPE A BULB NOT INCLUDED INTO 5 COMPLETE INSTALLATION INSTRUCTIONS ON NEXT PAGE 10 2013 92077WHNIK ASSEMBLY INSTRUCTIONS SUPPLY GROUND WIRE OUTLET BOX WHITE SUPPLY WIRE WIRE CONNECTORS 3 PCS BLACK SUPPLY WIRE CEILING BLACK FIXTURE WIRE W WHITE FIXTURE WIRE GREEN GROUND WIRE CROSSBAR 8 52 SCREWS SUPPLIED WITH BOX
Download Pdf Manuals
Related Search