Kenroy Home 93261CLR Installation Guide
Contents
1. 1CLR ASSEMBLY INSTRUCTIONS SUPPLY GROUND WIRE OUTLET BOX WHITE SUPPLY WIRE WIRE CONNECTORS 3 PCS BLACK SUPPLY WIRE CEILING BLACK FIXTURE WIRE l WHITE FIXTURE WIRE FIXTURE GROUND WIRE CROSSBAR 8 32 SCREWS SUPPLIED WITH BOX MOUNTING SCREW GREEN GROUND SCREW 2 PCS TTTITITTIIYVUEI ANOPY BALL FINIAL 2 PCS INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES F YOU ARE NOT FAMILIAR WITH WIRING YOU SHOULD USE A QUALIFIED ELECTRICIAN THIS FIXTURE IS INTENDED TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE FIXTURE COMPLETE FIXTURE ASSEMBLY INSTRUCTIONS FIRST SEE PREVIOUS 1 ATTACH THE CROSSBAR TO THE CEILING OUTLET BOX USING THE TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 2 CONNECT THE WHITE FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTORS PRO2. MODkL 95261CLR PACKING DIAGRAM I I 12 KG6S AND OTHER PARTS LASS SHADE SOCKET ASSEMBLY AND SOCKET RING ORK s STYROFOAM 12 KGS ANOPY ALL FINIAL 2 PCS SOCKET ASSEMBLY LASS SHADE s OCKET RING uo 93261CLFR ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS FIXTURE SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT LADDER SCREWDRIVER ADJUSTABLE WRENCH WIRE CUTTERS UNPACK THE FIXTURE YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE CANOPY SOCKET ASSEMBLY GLASS SHADE SOCKET RING AND FORK TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE MOUNTING HARDWARE PACKAGE 2 MOUNTING SCREWS AND 3 WIRE CONNECTORS FIXTURE ASSEMBLY 1 REMOVE CROSSBAR FROM TOP OF THE CANOPY BY UNSCREWING 2 BALL FINIALS 2 LOOSE THE SET SCREW ON BOTTIOM OF THE CANOPY AND ADJUST THE CORD LENGTH AND THEN TIGHTEN THE SET SCREW 3 TUCK THE EXCESS CORD AND SECURE WITH A ZIP TIE NOT INCLUDED HIDE THE EXCESS CORD IN CANOPY STOP COMPLETE INSTALLATION INSTRUCTIONS ON NEXT PAGE BEFORE CONTINUING TO FINAL ASSEMBLY FINAL ASSEMBLY 1 PLACE THE GLASS SHADE OVER THE SOCKET AND SECURE WITH THE SOCKET RING FORK INCLUDED 2 RESTORE POWER YOUR NEW FIXTURE IS NOW READY FOR USE 09 2014 9326
3. VIDED CONNECT THE BLACK FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE CROSSBAR THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 3 TUCK THE WIRES CAREFULLY INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE 4 RAISE THE FIXTURE TO THE CEILING AND SECURE IN PLACE WITH 2 BALL FINIALS 8 SEE PREVIOUS PAGE FOR FINAL ASSEMBLY INSTRUCTIONS 09 2014 93261CLR INSTALLATION
Download Pdf Manuals
Related Search