Hampton Bay 27203 Instructions / Assembly
Contents
1. l To clean the outside of the fixture use a dry or slightly dampened clean cloth use clean water never a solvent to wipe the glass and surface of the fixture 2 To clean the inside of the fixture first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box Next use a dry or slightly dampened clean cloth use clean water never a solvent to wipe the inside glass and interior surface of the fixture 3 Do not use any cleaners with chemicals solvents or harsh abrasives Use only a dry soft cloth to dust or wipe carefully LIMITED WARRANTY The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original consumer purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion provided that the product has not been damaged through misuse abuse accident modifications alterations neglect or mishandling This warranty shall not apply to any product that 1s found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result of an accident misuse2. abuse negligence alteration or faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this is considered normal wear and tear The manufacturer does not warrant and specially disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Page 8
3. INSTRUCTION MANUAL 3 Light Pendant Croft Home Depot SKU 528 127 UPC 718212272039 Olive Stone Finish LA 2022E S F Page 1 Thank you for purchasing this Hampton Bay interior light fixture This product has been manufactured with the highest standards of safety and guality FEATURES 1 Traditional 3 Light Pendant in Olive Stone Finish 2 Timeless Elegant Design 3 Easy to assemble and install OUESTIONS PROBLEMS MISSING PARTS Before returning to your local Home Depot please call our Customer Service Team at 1 877 527 0313 or visit www homedepot com Please reference your SKU 528 127 Olive Stone fixture or UPC 718212272039 Olive Stone fixture Page 2 CAUTION 1 Before starting installation of this fixture or removal of a previous fixture disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box 2 CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS 3 If you have any non electrical questions about this fixture please contact our Customer Service Team at 1 877 527 0313 or visit www homedepot com Please reference your SKU 528 127 Olive Stone fixture or UPC 718212272039 Olive Stone fixture 4 Keep your receipt and these Instructions for Proof of Purchase TOOLS REQUIRED FOR ASSEMBLY amp INSTALLATION not included Light Bulb 100 watt maximum a A s E ee U ne prezen wyc Wi a Gi T Pr Flat
4. g Loop 11 until snug 2 Thread other end of Nipple with Loop attached into crossbar 17 until snug 3 Place Lock Washer 14 over end of Nipple protruding through crossbar and thread Hex Nut 15 onto nipple until tight 4 Take the crossbar assembly and mount to ceiling outlet box 19 with outlet box screws 13 Tighten screws securely with screwdriver 5 By measuring determine correct number of links needed for proper hanging height Use a pair of pliers to open one end link of the chain and discard un wanted chain Don t disregard the Quick Link linked at the end of Chain 6 Slip Canopy 10 and Lock Collar 9 through over the Ceiling Loop with Chain 11 then connect the other end of Ceiling Loop with Chain 11 to Fixture Loop by using Quick Link 8 7 Lace the fixture s wires through the chain links and pull until taut Feed the fixture wires through the Lock Collar Canopy Ceiling Loop with chain and Nipple and pull until taut 8 Connect the ribbed wire from the fixture to the Neutral wire from the outlet box 19 and the smooth wire from the fixture to the hot wire from the outlet box 19 Cover the two wire connections using the two provided wire connectors 18 Wrap the two wire connections with electrical tape for a more secure connection If your outlet box has a ground wire green or bare copper connect fixture s ground wire to it using the wire connector 18 Otherwise connect the copper grou
5. head screwdriver Wire strippers rai main Phillips screwdriver Step Ladder AD Electrical tape Chain Pliers 4 Wire cutters Page 3 PARTS INCLUDED FOR ASSEMBLY parts are not to scale w J Ps 3 Long Screw 2 3 Arm 3 1 Glass Shade 6 3 Short Screw 4 1 Metal Ring 7 ASSEMBLY INSTRUCTIONS 1 Shut off power at the fuse box or circuit breaker box if necessary remove old fixture and all mounting hardware from outlet box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to lose any small parts necessary for installation 3 Secure the one end of Arm 3 to top coupling of Fixture Body 1 and tighten with Long Screw 2 Do the same with the other arms 4 Place Glass Shade 6 over the Metal Ring 7 5 Connected the Metal Ring 7 and the Shade 6 as illustrated to the other end of Arm 3 secure with Short Screw 4 Page 4 ASSEMBLY 2 Long Screw 1 N ng 1 Fixture Body 3 Arm 4 Short Screw 6 Glass Shade 7 Metal Ring Page 5 PARTS INCLUDED FOR INSTALLATION parts are not to scale 1 Ceiling Loop with Chain 11 1 Quick Link 8 1 Lock Collar 9 1 Canopy 10 A p P Sad SI I Nipple 12 I Lock Washer 14 I Hex Nut 15 M 1 Ground Screw 16 2 outlet Box Screw 13 1 Crossbar 17 3 Wire Connectors 18 INSTALLATION INSTRUCTIONS 1 Thread Nipple 12 into Ceilin
6. nd from the fixture to Ground screw 16 on the Crossbar 17 Note If you have electrical questions consult your local electrical code for approved grounding methods 9 Tuck these wire connections neatly into the ceiling outlet box and then raise the canopy all the way to the ceiling Raise the Lock Collar and thread onto Ceiling Loop protruding through Canopy 10 Install Light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING Il Installation is complete Turn on the power at the circuit breaker or fuse box Turn the light switch on to activate the fixture Page 6 INSTALLATION 19 Outlet Box 18 Wire Connectors 15 Hex Nut P 14 Lock washer 17 Crossbar P j 16 Ground screw AN Ground Wire Neutral Wire Ribbed 13 Outlet Box Screws Hot Wire Smooth 12 Nipple 11 Ceiling Loop with Chain ET Sars CIEN qi gd i q 10 Canopy 9 Lock Collar 8 Quick Link D Fixture Loop Page 7 TROUBLESHOOTING DN Possible Cause Corrective Action Bulb will not light 1 Bulb is burned out 1 Replace light bulb 2 Power 1s off 2 Make sure power supply is on 3 Faulty wire connection 3 Check wiring 4 Faulty switch 4 Test or replace switch Fuse blows or circuit Crossed wires or power wire Check wire connections breaker trips when light is grounding out is turned on PRODUCT MAINTENANCE
Download Pdf Manuals
Related Search