Titan Lighting TN-50201 Installation Guide
Contents
1. Fixture Loop2. CHAIN HUNG FIXTURE MOUNTING AND WIRING INSTRUCTIONS 1 Fasten mounting strap to junction box with machine screws found in junction box The mounting strap must be used to provide proper grounding of fixture 2 Turn nipple into threaded hole in the mounting strap Turn hex nut onto nipple Remove knurled nut from hang er loop Turn hanger loop onto nipple Place canopy up against ceiling and adjust nipple to leave about 3 8 pro truding through canopy Remove canopy and tightly lock nipple in place by turning hea unt up against mounting strap 3 Assemble one end of chain to fixture loop by opening chain link and closing it around loop NOTE Never twist chain link to open Chain link must be openedin a C shape 4 Weave the two conductor cord and bate ground wire through the chain about every third link Slide knurled nut down chain Slide canopy down chain 5 Adjust chain length and wire lead length at this time for desired hanging height of fixture Leave atleast 12 of leads beyond end of chain 6 Open last chain link then lift chain and fixture up to ceil ing and hook open link through hanger loop Close chain link 7 Insert wire leads through hloe in hanger loop and nipple into junction box Pull leads down out of junction box for easier wiring Connect the IDENTIFIED lead white tinned or ribbed if both conductors are the same color feel for the ribbed edge that runs the entire length of one side to the WHITE hous
3. e wire Connect the UNIDENTIFIED lead to the BLACK house wire Turn the green ground screw into the hole inthe mounting strap and wrap the bare ground wire around screw one full turn and tighten screw Connect remaining end of bare wire to the house ground wire bare If the junction box itself is metal and is already grounded attachment to the green screw only is sufficient Always use wire connectors that are UL approved for the size and number of wires to be connected Caution Never connect the bare ground wire to the black or white house wires 8 Place all wites and connectors back into the junction box making sure there are no loose wire connectors or bate leads Slids canopy up to ceiling and hold in place by turning knurled nut onto hanger loop 9 For fixtures with glass shades only Your glass shade is held in place either by thumbscrews or by a spin on ring sctewed onto a threaded socket Place glass shade s into holder and tighten thumbscrews or spin ring onto socket 10 Lamp fixture with proper size bulbs in accordance with the wattage label found on the fixture Junction Box White House Wire Black House Wire Le DA oe Ground 7777 LIT AZZI A ire Wire Connectors Bana na Identified Fixture Wire Unidentified _ i Fixture Wire Fixture Ground Machine Screws found in junclion box n Hex Nut a Nipple Wire Green Ground Screw Mounting Strap Canopy Knurled Nut
Download Pdf Manuals
Related Search