Illumine CLI-SH0243448 Instructions / Assembly
Contents
1. CARE OF AND TROUBLESHOOTING YOUR FAN 4 Check hardware bi yearly Because of the fan s mechanical movement some connections may become loose over time Check the support connections brackets and blade attachments twice a year Make sure they are secure It is not necessary to remove fan from the wall 2 Clean your fan periodically This will help to help maintain its new appearance over the years Use only a lightly water moistened lint free cloth to avoid scratching the finish Plated finishes are sealed with lacquer to minimize discoloration or tarnishing Do not let rain or running water to come in contact with the fan Rain or running water could damage the motor wood blades or possibly cause an electrical shock 3 There is no need to oil your fan The motor has permanently lubricated bearings 4 Fan makes a vibration noise Check to see that all screws are tight in the fan cage connection to the motor face plate 5 Fan vibrates or makes grinding noise as blades rotate Uninstall and reinstall the blades Make sure that your fan head s set screw is counter sunk into the bore hole in the flat part of the motor shaft Be careful that the blade brackets themselves are not bent in this process Do not operate your fan if it continues to vibrate Contact your Atlas Fan Co purveyor if the re installation of the blades does not resolve the problem 6 Clicking noise from inside of center of fan As unit rotates at higher R P M s clicking no2. ises are normally heard from the braking mechanism within the fan body If the noise is bothersome slow the unit down To do this see Regulation of Rotation section above 7 Fan is not rotating or doing so unevenly See Regulation of Rotation section above and verify that coupling cover has at least 1 8 1 4 clearance between it and fan motor assembly otherwise coupling cover will act as a brake impeding rotation 8 Lights shut off and will not come back on This unit is equipped with a wattage limiting device Lamping in excess of 190 watts will disable your ceiling fan s light kit To reset your light kit you must turn the power off and re lamp keeping the wattage under 190 watts Restore power to your ceiling fan and continue normal operation
Download Pdf Manuals
Related Search