none 5715F4S Instructions / Assembly
Contents
1. unplug and plug in a few times and it should start 11 If you find that the pump provides too much water action you may reduce the flow by pulling the tube further down in the Finial 12 Save this instruction and make sure to winterize according to details below csd IMPORTANT WINTER CARE Winter ice build up can cause damage to concrete statuary Follow these tips to reduce winter weathering to your fountain Disconnect power to pumps Remove adapter from bottom bowl to open drains and let all moisture out Keep drains open throughout winter Place an absorbant material like burlap blankets etc inside vases bowls and cover all with a Henri fountain cover Do not allow snow or ice to build up on or against the concrete Remove snow before it turns to ice Do not use salt or chemical ice removers as these may damage concrete By following these simple and sensible precautions during the winter season you will protect your fountain for years of beauty and enjoyment2. 5715F4 SET UP INSTRUCTIONS 1 Prepare a suitable location for your new fountain The fountain should sit on a firm and level pad 2 Always follow local electrical codes making sure to connect to a safe GFCI circuit 3 Set the 7716H Pedestal on your chosen location making sure to face the side with the power cord notch underneat toward your power supply 4 Set the 6716BH Bottom Bowl on the Pedestal 5 Place the pump in the Bottom Bowl Push the pump power cord down through the hole in the Bowl and pull it out from iPod Anetar a cau under the Pedestal toward your power Pump 2463H supply Then place the rubber stopper with the cord size hole around the power cord just a few inches from the pump dail and push the stopper tightly into the bowl s hole to make the bowl water tight 6 Thread the barbed adapter into the top of the pump Push one end of the 34 tubing onto the barbed adapter 7 Set the 6716AH Middle Bowl in place on the 6716BH Bottom Bowl pulling the excess tubing up through the center hole as you go Then place the other rubber stopper around the tubing and press the stopper tightly in place 8 Place the 5715AH Finial on top of the Middle Bowl pushing the tubing up inside of the Finial 9 Read your pump instructions 10 Fill the bottom bowl Then plug the pump in to enjoy your fountain If the pump does not immediately begin working there may be an airlock within the impeller chamber Simply
Download Pdf Manuals
Related Search