Home

none 5668FBXS Instructions / Assembly

1. a For best results locate a suitable site for your fountain that is leveled and provides pleasing viewing angles q i Note Always follow local electrical codes and use a 110V GFCI protected outlet NGENE EED EA 5668F 1 Locate a suitable site for your fountain Site should be level and provide a pleasing viewing angle You should always follow local electrical codes and use a GFCI protected outlet 2 Locate the 6668 bowl in the center of your site Bowl must be on firm leveled surface 3 Feed cord through opening inside the bowl and place Rubber Stopper around pump cord as illustrated Fig A amp B Press Rubber Stopper firmly into place Fig C creating a watertight seal 4 Place submersible pump in bottom of bowl facing the pump s intake towards the lowest point Connect Tubbing to pump and slip in the Restrictor Place 5668 Spiral Top on top of 6668 Bowl Lean it towards one side to connect tubing Fill 6668 bowl with water Plug pump into GFCI protected outlet Adjust R1 as necessary to control flow 0 Decorate with rocks or pebbles not included to complete the effect ai ee ees IMPORTANT WINTER CARE Do not allow water to collect and freeze in fountain bowl s or shell s Do not allow fountain pieces to sit in a pool of ice Disassemble entire fountain and pump and store indoors during the winter season If you cannot store your fountain indoors during the winter season you must at least protect it fro
2. m ice collection or exposure first remove the statue s and pump storing them inside if possible Next locate the drain plug on the underside of bowl s or shell s Remove the drain plug to drain any water trapped between the walls of the bowl s or shell s Then fill the bowl s or shell s with an absorbent material such as burlap blankets etc Finally cover the entire fountain with a Henri Fountain Cover Should condensation droplets form on the inside of the cover the material will absorb them By following these simple and sensible precautions during the winter season you will protect your fountain for years of beauty and enjoyment CAUTION The use of Chlorine or Chlorine Bleach may damage the finish of your fountain When cleaning your fountain it is best to test the cleaning agent on an underside or back surface to determine the agent s suitability We recommend the use of a mild non abrasive treatment such as Henri Lime Remover and Preventer To avoid foaming thoroughly rinse the fountain to remove the entire cleaning agent TS5668F 2008 03 10

none 5668FBXS Instructions / Assembly

Contents

Download Pdf Manuals

Related Search

Related Contents