Dimex 1806BR-24C Installation Guide
Contents
1. JEdge Aluminum Landscape Edging INSTALLATION INSTRUCTIONS Required tools Spade Hammer Hacksaw Edger trencher optional 1 Lay out area to be edged A garden hose or string works best 2 Spade a vertical wedge in ground approximately 4 deep and 3 4 wide 3 Begin placing edging in trench with the top 1 2 12 5cm above what will become the compacted finish grade 4 Slide ends of edging strips together to connect pieces Installer can connect the adjacent section of edging prior to or after the sections are placed in the trench A minimum of 2 inches 50 8mm of overlap is recommended with a preferred 4 inch overlap 5 Cut edging section to the desired length at the end of the bed area 6 Drive spikes through holes in edging at a 45 degree angle Start with the beginning piece of edging 7 Stake and backfill edging continuously to ensure straight lines compacting both sides to ensure the finish grade is approximately 1 2 below top of edging I you have any questions or comments on the installation or performance of this edging please call Sure loc Aluminum Edging at 1 800 787 3562 EACH BOX INCLUDES 4 6ft Sections aluminum 12 Spikes edging 24 linear feet total
Download Pdf Manuals
Related Search