Home
        Havahart 1025 Instructions / Assembly
         Contents
1. Live Animal Two door Cage Trap Instructions  Models 1020  1025  1030   amp  1040       Check the Trap  Occasionally the cage will shift      due to shipping  Please examine the cage i    carefully  a    9 rie a F ey  I E eA A M y  Cage should not be damaged or bent    Fao A       e Bait pan should move freely   e Door locks should move easily from locked  position over top horizontal wire  illustration  1     e Camouflage should not interfere with  operation of trap   e Ifthe trigger rods do not move downward  freely  pull the looped trigger rod outward  away from the cage keeping it aligned  horizontally with the top of the cage     PASAN   PA A 0T D T FTA Y N7    Illustration 1    With door locks in the open position  check that the  doors can be opened by gently pushing down on  trigger rods  Notice that trigger rod with offset loop  is above straight trigger rod  so pushing down loop  rod opens both doors  illustration 2     Setting the Trap   1  Turn the door locks to the open position   illustration 1     2  Push down on the straight trigger rod to open  door    3  While holding door open  place bait on the bait  pan  See back for bait suggestions  When finished   close door    4  Push down on the offset loop on the looped  trigger rod to open both doors  illustration 2     5  Position the flat end of the looped trigger rod  under the flat end of the bait pan trigger  so that Illustration 3  both doors are held open and the bait pan is level     illustration 3     6  Tu
2. rn door lock knobs so that both door locks   rest on doors  illustration 4         7  Set and trip cage several times to be sure the  cage is working properly  Trip trap using a pen or  pencil  sticking an end through the side of the cage  and pushing down on the bait pan     Adjusting Trigger Rods    For all models  if a door is not level when the cage  is set  hold the door open and level with one hand   and bend the trigger rod up with the other hand     Correcting Over Adjustment to Trigger Rods    On the 1025  1030  and 1040  tension on the  trigger rods should be only from door springs  To  correct an over adjustment to the tension  hold the  door open and level  and bend the trigger rod  down     Releasing the Animal    To release the animal  flip the door locks into the  unlocked position  illustration   1   Gently flip the  trap on to it s side or upside down  One suggestion  would be to use your foot  Back away from the  trap  The animal will walk away on it s own        
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Netgear R6300 User's Manual  Reflections on UNIX Vulnerabilities  XiVO-doc Documentation Release 15.13 Avencall  取扱説明書 - アロン化成株式会社  USER MANUAL - Kramer Electronics    Copyright © All rights reserved. 
   Failed to retrieve file