Orbit 67798F Instructions / Assembly
Contents
1. 2 IN 1 DRIP FILTER PRESSURE REGULATOR Instructions Features a 200 Mesh NS le Important If static water pressure exceeds 80 installed on the main sprinkler line Pressure test all water lines before Warning DO NOT use pipe dope on Installation Q Q Step 1 Put 5 complete turns of tape around the threads of each end of the Filter Pressure Regulator PROOF NO 1 DIMENSIONS DATE 07 16 10 FLAT W 8 5 H 11 FINISHED W 8 Orbit gt Congratulations on your purchase of the Orbit 2 in 1 Filter Pressure Regulator This revolutionary product allows you to convert your 1 FPT Jar Top irrigation valve into a low pressure drip valve removable filter s 30 Psi pressure regulator a MPT Inlet outlet Guidelines For outdoor use with cold water only Check local codes for installation requirements PSI a pressure regulator should be covering pipe and timer control wire threads use thread seal tape Instructions Step 2 Thread the Filter Pressure Regulator into the valve until snug Important ensure that the water flow arrow and pressure regulator point away from the valve and towards the sprinkler pipe Printers are responsible for meeting print production 5 D H 11 requirements Any changes DES SM SPCK XX COLORS JOB No NA Registration E CLIENT Orbit SKU 67798F P 801 295 9820 F 801 951 5815 www fluid studio2. net 1065 South 500 West Bountiful Utah 84010 upc NA FILE NAME 67798F 24 rB indd SOFTWARE InDesign CS5 must be approved by the client and Fluid Studio PRINTED PIECE MUST MEET color non printing non printing DESIGNATED SPECIFICATIONS ON THIS FORM PMS 2222 PMS 2222 2007 Fluid Studio This work is the property of Fluid ADDITIONAL INSTRUCTIONS Font sizes cannot be smaller than 7 pt Studio and cannot be used reproduced or distributed in any way without their express permission Parts Listing gt Flush Cap O Filter Housing D Filter Housing O Ring N Filter Body Filter O Rings Filter Receiver lo Pressure Regulator Assembly ID e d Maintenance Monthly Use the flush port to clean large debris from the filter adjust frequency based on water conditions Before flushing ensure that the timer is in the OFF position Next remove the flush cap and attach a garden hose to the filter housing Rotate the bleed screw counter clockwise to manually open the valve and let the water run for 30 seconds Turn the bleed screw clockwise to close the valve and replace the flush cap Annually Removing fine debris from the filter With your timer in the OFF position remove the filter hou
3. sing by unscrewing the housing ring Gently remove the filter and flush with clean water Ensuring that all four o rings are in place Replace housing and hand tighten the housing ring Orbit Irrigation Products Inc North Salt Lake UT 84054 1 800 488 6156 www orbitonline com 67798F 24 rB
Download Pdf Manuals
Related Search