Mont Blanc 50400NSC Installation Guide
Contents
1. STEP FIVE Drill a pilot hole inside the line drawn in Step 4 to allow a starting point for the Jig saw STEP SIX Following the line drawn in Step 4 carefully cut out the countertop STEP SEVEN Temporarily position the sink in the countertop opening so the sink edges line up with the pencil line or tape border to insure a successful fit STEP EIGHT Carefully remove the sink and clean the countertop and remove tape if any Continued on Back gt gt gt THERMOCAST A DIVISION OF INTERNATIONAL THERMOCAST CORPORATION 308 Bell Park Drive Woodstock Georgia U S A Sales Support Center 678 445 2022 www thermocastsinks com2. Thermocast Installation Guidelines Important Before you Begin Read all instructions carefully before beginning installation Remove the sink from its original carton and inspect it for damage Return the sink to its protective carton until you are ready to place it into position in the countertop Inspect your faucet hardware to insure that all components exist for a successful installation as outlined in the faucet and or hardware installation guide Inspect the waste and supply lines and replace if necessary RECOMMENDED TOOLS amp MATERIALS SILICONE Pencil Safety Glasses 100 Silicone Sealant Plumbers Putty i E SS Regular amp Phillips Jig Saw Masking Tape Paper Towels Channel Locks Screwdriver SELF RIMMING INSTALLATION If this is a replacement for a sink of the same size no cutting of your existing countertop is necessary If this is a new installation or you are replacing a smaller sink we offer the following information No mounting clips are required STEP ONE Position the sink UPSIDE DOWN in the desired location on the countertop Verify the position and desired fit while observing the front overhang that exists on all countertops STEP TWO With a pencil trace a line or apply a border of masking tape around the outside edge of the sink on the counter top STEP THREE Remove the sink from the countertop STEP FOUR Measure in 3 4 and draw new lines inside the first sink outline just drawn or taped
Download Pdf Manuals
Related Search