Fasade 163-17 Installation Guide
Contents
1.2. Fasade Decorative Thermoplastic Panels How to Install J Trim for Fasade Glue up Ceiling Tiles Fasade Ceiling J Trim Installation Insert panel into the Edge J Trim if applicable If using the Edge J Trim attach the trim up to the ceiling before installing the ceiling panels The trim can be bonded to the wall using PL Premium adhesive by applying a 1 8 inch bead to the back of the trim and pressing firmly into the drywall Staples can be used to tack trim in place until adhesive is cured 24 48 hours Alternatively drywall screws can also be used to attach trim to wall Do not over tighten screws Edge J Trim Profile Drawing How to Install Trims for Fasade 4x8 Wall Panels Adhere J trims using double sided tape or tube adhesive Inside corners don t require any adhesive They stay secure as two backsplash panels connect to them if the area to be covered ends on a flat wall and you desire to finish the cut edge of the last panel it can be done by using a piece of matching Edge J Trim This trim piece slides onto the cut edge of the panel If you have an inside corner we recommend using a piece of matching Inside Corner Trim See drawing below Trim Profile Drawings Edge J Trim Divider Trim Top View Cross Section Top View Cross Section End Point on Wall Panels Meeting along Wall Outside Corner Trim Inside Corner Trim Top View Cross Section Top View Cross Section inside Corner of Walls Outside Corner of Walls
Download Pdf Manuals
Related Search