KOHLER K-9018-PB Installation Guide
Contents
1. Elbow Flange Cleanout Plug 114233 2 AA 9626 Copyright 1997 Kohler Co K 9020 with 1 1 4 O D inlet and 1 1 4 N P T outlet Thread end of tube into drain outlet Slide flange back to wall to cover the drain outlet Insert other end of tube into elbow and connect with nut and gasket Place trap nut and gasket onto tailpiece Slide trap over tailpiece and into elbow Tailpiece must extend 1 to 2 into trap Tailpiece may have to be cut to fit Tighten nuts and gasket Cleanout plug is used to remove any debris which has fallen into the trap Flange Gasket Nut X Tube AR G08 Gasket W Elbo Drain Nut Outlet K 9021 with 1 1 4 O D inlet and 1 1 2 N P T outlet Thread end of tube into drain outlet Slide flange back to wall to cover the drain outlet Insert other end of tube into elbow and connect with nut and gasket Place trap nut and gasket onto tailpiece Slide trap over tailpiece and into elbow Tailpiece must extend 1 to 2 into trap Tailpiece may have to be cut to fit Tighten nuts and gasket Cleanout plug is used to remove any debris which has fallen into the trap K 9022 with 1 1 2 O D inlet and 1 1 2 N P T outlet Thread end of tube into drain outlet Slide flange back to wall to cover the drain outlet Insert other end of tube into elbow and connect with nut and gasket Place trap nut and gasket onto tailpiece2. Slide trap over tailpiece and into elbow Tailpiece must extend 1 to 2 into trap Tailpiece may have to be cut to fit Tighten nuts and gasket Cleanout plug is used to remove any debris which has fallen into the trap INSTALLATION CHECKOUT Turn water supplies on and run water through drain to check for leaks at all P trap connections 114233 2 AA 9626 Kohler Co Kohler WI
3. KOHLER DRAIN SHROUD AND P TRAPS INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN HOW TO USE THESE INSTRUCTIONS All information in these instructions is based on the latest product information available at the time of publication Kohler Co reserves the right to make changes in product characteristics packaging or availability at any time without notice NOTES REQUIRED TOOLS AND MATERIALS e Drain shroud conceals drain for console tables e Adjustable or open end wrench e Shut off the main water supply e Strap wrench e Observe all local plumbing codes DRAIN SHROUD INSTALLATION Install pop up drain per manufactures instructions Slide drain shroud with slot facing toward the back up over tailpiece and around ball lever rod until contact with locknut on pop up drain At this point p trap must be installed to hold drain shroud in position Drain Shroud P TRAP INSTALLATIONS K 9018 with 1 1 4 O D inlet and 1 1 4 O D outlet Intended for console table installations Insert tube into drain outlet and connect with nut and _ NS gasket not supplied Slide flange back to wall to cover the drain outlet Place trap nut and gasket onto tailpiece Slide trap over tailpiece and tube elbow Tailpiece must extend 1 to 2 into trap Tailpiece may have to be cut to fit Tighten nuts and gaskets Drain Cleanout plug is used to remove any debris which has Tube Gasket Outlet fallen into the trap
Download Pdf Manuals
Related Search