Elmdor FRC8X8PC-DUL Installation Guide
Contents
1. track Minimum c In order to insure that panel is self closing it must of two screws per side Wrapping of joist not be released from at least 60 degrees from the required in one hour ceiling application horizontal Remove automatic door closer spring Place panel in position in opening and mark Note location of attaching screws on studding using All fire rated access panels are self closing holes in latch and hinge sides of panel frame as marking guides Remove panel and drill 5 32 holes through ghee de eck eke ee eek studding at points marked for attachment holes Alternate installation for 1 hour ceiling with wood frame Place panel in position leaving masonry anchor Ceiling to have two layers of 5 8 gypsum wallboard straps flat against panel frame and attach with leaving a 1 airspace around the door frame assembly 10 drywall screws No lining of wood joist required Panel can be supported with 12 gage wire ties or plumbers tape attached from framing screws to wood studs of flooring above Check panel for freedom of movement If binding occurs shim as necessary to prevent racking of frame Re attach automatic door closer spring and secure to sub framing above to ensure door is self closing Member of U S Green Recyclable Building Council FRC INSTALLATION Revised 3 24 09 Product ELMDOR STONEMAN e P O BOX 3527 e CITY OF INDUSTRY CA 91744 0527 U S A e TEL 800 591 9181 e 626 968 8699 e FAX 6262. 333 4109 A Division of Acorn Engineering Company www elmdorstoneman com e E mail info elmdorstoneman com
3. access poors OSELMDOR ACCESS DOORS FIRE RATED ACCESS PANEL CEILING INSTALLATION INSTRUCTION EXTRA SPRING PROVIDED FOR CEILING INSTALLATION ON SIZES a 16 x 16 OR LARGER BOTH SPRINGS MUST BE ATTACHED FROM the SPRING BASE TO THE FRAMING OR FLOOR ABOVE IN SUCH MANNER TO ENSURE THE PANEL IS SELF CLOSING STEEL STUD WOOD INSIDE OOD LATCH RELEASE ed 1 1 4 DRYWALL BENT INWARDS RELEASE SCREWS SO PANEL REMAINS THROUGH HOLES PROVIDED IN THE UP POSITION TWO LAYERS OF TYPE X DRYWALL i ONE HOUR RATED CONSTRUCTION THREE HOUR RATED CONSTRUCTION THREE HOUR CEILING NON COMBUSTIBLE SYSTEM OR ONE HOUR WOOD FRAME SYSTEM AT ALL FOUR SIDES OF DOOR OO D B With metal studding install a framed opening at Important specified location of panel Opening dimensions a Panel sizes 16 x 16 and larger are supplied with an should be 1 5 8 larger than door size of panel extra spring It is the responsibility of the installer to i e for a 16 x 16 panel opening should be attach these springs from the spring base on back of 17 5 8 x 17 5 8 before being lined with panel to framing of floor above to insure that door is drywall self closing The interior of opening should be lined with b Before installing panel bend lock release bracket 5 8 type X gypsumboard using screws spaced inward causing panel to stay in the up position 18 o c maximum to the 1 5 8
Download Pdf Manuals
Related Search