Edsal UR-364BLK Instructions / Assembly
Contents
1. information Model Part amp Description Location Purchased Date Purchased Consumer Products Division Edeal Manufacturing Company 4400 South Packers Avenue Chicago IL 60609 Assembly Instructions for UR Assemble two 2 post with one 1 brace see figure A Skipping one slot from the bottom of the post place the rivets into post with the shelf edge facing up see figure B Tap lightly to seat rivets Repeat with two 2 post and one 1 brace Assembie the two 2 post end units with two 2 beams see figure C Skip one slot from the bottom of post tap lightly io seat rivets Add a wood shelf to the previously built level then assem ble the top post to the bottom post by using four 4 of the Post couplers Place the couplers into the top of the bot tom post and the bottom of the top post and tap down to Properly seat see figure D Continue by adding the third level using two 2 beams and two 2 braces just above the post couplers Again tap lightly to seat the rivets Start by adding a wood shelf to the level previously built then continue working by adding the second level using two 2 beams and two 2 braces in the post slots of your desired location Again place the rivets of the beams and braces into the post siot with the shelf ledge facing up and tap lightly to seat the rivets into the pe Add a wood shelf to the previous b t level then con tinue by adding the final level to t2. edsal steel Storage Rack ben a an las B Braces 8 RUBE1702 17776 C Post J 8 RuPT 30025 30 D Wood Sheif 4 RPB21836 352932 E Coupier_ 4 J Rmpco4og 4 MODEL NUMBER s UR 364 These units should be placed on a level surface Failure to do so can result in poor product perforrr ance or create a possible safety hazard This unit should be securely anchored o a wall or floor with suitable fasteners whict are not included Do not use this unit for anything other than the manufactures intended purpose DO NOT STAND ON ANY PART OF THE UNIT OR USE IT AS A LADDER Evenly distribute the weight on each level and always keep the heavier loads on the bottom Use care when working with metal parts Assembly is done with the rivets of the beams and braces fitting into the slots of the post A rubber mallet may be used on the beams and braces to seat the rivets properly A hammer can also be used providing one uses a c th or a block of wood be tween the hammer head and the parts to prevent damage Tap gently and be sure the rivets are sti igi and fully engaged Should you have any comments damage missing parts or problems with assembly of this unit please feel free to contact our Edsal manufacturing facility at 773 475 3137 and request customer service We can also be reached on the internet at the following email address service edsal com To obtain replacement parts please provide the folowing
3. h tnit using two 2 beams and 2 braces Tap lightly to properly seat the rivets and add the final wood shelf to the top of the unit
Download Pdf Manuals
Related Search