Martha Stewart Living 1607500600 Instructions / Assembly
Contents
1. 12 ASSEMBLE THE UP ADORNING PANEL e ATTACH THE UP ADORNING PANEL D TO TOP PANEL A USING 3 SCREWS C1 10 14 13 ASSEMBLE THE CAM LOCK CAPS E1 e ATTACH THE 4 CAM LOCK CAPS E1 ONTO THE 4 CAM LOCKS S 11 14 Warning The anti tip hardware must be used as part of assembly 14 ASSEMBLE THE BACK PANEL e ATTACH THE BACK PANEL N 0 P USING 58 SCREWS e ATTACH 2 HOOKS V USING 4 SCREWS W IN THE PREDRILLED HOLES OF REAR TOP PANEL A 12 14 15 ASSEMBLE THE EVA PADS F1 e ATTACH 4 EVA PADS F1 TO SIDE PANEL B C 2 9 12. HOME DECORATORS COLLECTION BF 25154 APOTHECARY HUTCH 34 HX42 WX8 D INV 16075 ASSEMBLY INSTRUCTIONS Made In China 1214 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST A B 4 C 27 TOP PANEL 1PC LEFT SIDE PANEL 1PC RIGHT SIDE PANEL 1PC D E F UP ADORNING PANEL 1PC STAND PANELS 5PCS ACROSS PANEL 1PC G H STAND PANEL 2PCS ACROSS PANEL 1PC STAND PANEL 5PCS J K L gt ACROSS PANEL 1PC STAND PANELS 2PCS ACROSS PANEL 1PC 2 14 DOWN ADORNING PANEL 1PC
3. UP BACK PANEL 1PC MIDDLE BACK PANBL 1PC Q DOWN BACK PANEL 1PC 1 Sr CAM TOOL 1PC R 2 CAM BOLTS 22PCS Hi CAM LOCKS 22PCS T 7mm x 5 8 om SCREWS 58PCS U 6mm x 5 8 SCREWS 8PCS HOOKS 4PCS 3 4 SCREWS 4PCS X GECKOS 4PCS PLASTIC BELTS 2PCS x 7 8 Z SCREWS 4PCS DOWELS 58PCS PLATES 2PCS C1 8mm x 1 v SCREWS 4PCS D1 8mm x 1 1 4 v SCREWS 14PCS E1 CAM LOCK CAPS 4PCS EVA PADS 4PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 14 NOTE LEAST TWO PEOPLE SHOULDER ARROW NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL gt ARROW e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 14 1 ASSEMBLE THE STAND PANEL e INSERT 4 DOWEL
4. 6 ASSEMBLE THE PLATES 81 e ATTACH THE PLATES B1 TO THE SIDE PANEL B C USING 8 SCREWS U 13 14 17 ASSEMBLE THE ANTI TIP HARDWARE eDRILL 4 HOLES INTO WALL PLEASE REFER TO THE REAR TOP PANEL S HOLES DISTANCE AND HEIGHT ePUT 4 GECKOS X INTO HOLES IN THE WALL AND ROTATE 4 SCREWS Z INTO THE GECKOS X e CONNECT THE TWO HOOKS V WITH A PLASTIC BELT Y 14 14
5. HE HOLES IN THE PANEL F H J L AND ATTACH USING 8 CAM LOCKS S 8 14 9 ASSEMBLE THE RIGHT SIDE PAKEL C e ROTATE 9 CAM BOLTS R AND INSERT 1 DOWEL A1 INTO THE HOLES IN THE RIGHT SIDE PANEL C e PLACE CAM BOLTS R INTO THE HOLES IN THE PANEL F H J L M AND ATTACH USING 9 CAM LOCKS S 10 ASSEMBLE THE STAND PANEL E e INSERT 10 DOWELS A1 INTO THE HOLES IN THE ACROSS PANEL e ATTACH THE STAND PANEL E TO THE ACROSS 9 14 11 ASSEMBLE THE TOP PANEL e ROTATE 4 CAM BOLTS R INTO THE HOLES IN THE TOP PANEL e INSERT 10 DOWELS A1 INTO THE HOLES IN THE PANELS e PLACE CAM BOLTS R INTO THE HOLES IN THE PANEL B C AND ATTACH USING 4 CAM LOCKS S e ROTATE 10 SCREWS D1 INTO THE HOLES IN THE TOP PANEL D B x
6. S A1 INTO THE HOLES IN THE ACROSS PANEL F e ATTACH THE STAND PANELS G TO ACROSS PANEL 2 ASSEMBLE THE ACROSS PANEL H e INSERT 4 DOWELS A1 INTO THE HOLES IN THE ACROSS PANEL H e ATTACH THE ACROSS PANEL H TO STAND PANELS 5 14 e INSERT 4 DOWELS A1 INTO THE HOLES IN THE ACROSS PANEL J e ATTACH THE STAND PANELS TO ACROSS PANEL J 4 e INSERT 4 DOWELS A1 INTO THE HOLES IN THE PANEL 1 e ATTACH THE ACROSS PANEL L TO STAND PANELS K USING 4 SCREWS 01 ASSEMBLE THE STAND PANEL ASSEMBLE THE ACROSS PANEL L 6 14 5 ASSEMBLE THE STAND PANEL 1 e INSERT 10 DOWELS A1 INTO THE HOLES IN THE ACROSS PANEL e ATTACH THE STAND PANELS 1 TO THE ACROSS PANEL 6 ASSEMBLE THE ACROSS PANEL J e INSERT 10 DOWELS A1 INTO THE HOLES IN THE ACROSS PANEL J e ATTACH THE STAND PANELS I TO THE ACROSS PANEL J 7 14 7 ASSEMBLE THE DOWN ADORNING PANEL e ROTATE 1 CAM BOLT R AND INSERT 1 DOWEL A1 INTO THE HOLES IN THE LEFT SIDE PANEL e PLACE CAM BOLT R INTO THE HOLES IN THE DOWN ADORNING PANEL M AND ATTACH USING 1 CAM LOCK S 8 ASSEMBLE THE LEFT SIDE PANEL 2 9 e ROTATE 8 CAM BOLTS R INTO THE HOLES IN THE LEFT SIDE PANEL B e PLACE CAM BOLTS R INTO T
Download Pdf Manuals
Related Search