Martha Stewart Living 1914400960 Instructions / Assembly
Contents
1. HOME DECORATORS COLLECTION BF 25174 MARTHA STEWART LIVING MUDROOM OPEN TOP STORAGE 19 Hx20 Wx16 D INV 19144 ASSEMBLY INSTRUCTIONS Made In China 1 8 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST A B 2 _2 TOP PANEL 1PC LEFT SIDE PANEL 1PC RIGHT SIDE PANEL 1PC D E F FRONT PANEL 1PC ACROSS PANEL 1PC STAND PANEL 1PC G H BACK PANEL 1PC ADORNING PANEL 1PC BOTTOM PANEL 1PC J K L 2 8 RUBBER TRAY 1PC CAM BOLTS 12PCS CAM LOCKS 12PCS 2 8 M 7mm x 5 8 om SCREWS 12PCS N 8mm x 1 SCREWS 2PCS li CAM TOOL 1PC P 6mm x 5 8 lt SCRE2. L 1 e ROTATE 4 CAM BOLTS K INTO THE HOLES IN THE BOTTOM PANEL e PLACE CAM BOLTS K INTO THE HOLES IN THE SIDE PANEL B C AND ATTACH USING 4 CAM LOCKS L 4 ASSEMBLE THE ADORNING PANEL H e ATTACH THE ADORNING PANEL H PANEL USING 2 SCREWS 6 8 i 5 ASSEMBLE THE TOP D e ROTATE 4 CAM BOLTS K INTO THE HOLES IN THE TOP PANEL A e PLACE CAM BOLTS K INTO THE HOLES IN THE SIDE PANEL B C AND ATTACH USING 4 CAM LOCKS L 6 ASSEMBLE THE BACK PANEL 0 e ATTACH THE BACK PANEL G USING 12 SCREWS M 7 8 7 ASSEMBLE THE RUBBER TRAY J KA e PUT THE RUBBER TRAY J ON THE PANEL 1 8 ASSEMBLE THE PANEL E F e INSERT THE STAND PANEL F INTO THE SLOTS IN THE ACROSS PANEL e PUT THE PANEL E F ON THE PAD J 8 8
3. WS 8PCS oo PLATES 2PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 8 NOTE LEAST TWO PEOPLE SHOULDER ARROW NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 8 1 ASSEMBLE THE LEFT SIDE PANEL ROTATE 2 CAM BOLTS K INTO THE HOLES IN THE LEFT SIDE PANEL e PLACE CAM BOLTS K INTO THE HOLES IN THE FRONT PANEL D AND ATTACH USING 2 CAM LOCKS L 2 ASSEMBLE THE RIGHT SIDE PANEL e ROTATE 2 CAM BOLTS K INTO THE HOLES IN THE RIGHT SIDE PANEL e PLACE CAM BOLTS K INTO THE HOLES IN THE FRONT PANEL 0 AND ATTACH USING 2 CAM LOCKS L 5 8 3 ASSEMBLE THE BOTTOM PANE
Download Pdf Manuals
Related Search