Proslat 33019 Instructions / Assembly
Contents
1. 4 Once you have attached the bottom of vertical J trims to your wall level and install one screw at the top of each to hold in place No need to tighten this screw all the way as this screw simply holds the J trim level temporarily Once you have installed most of your panels you will remove these and use them for your last panel The distance between the left and right J trim should be 96 1 4 exterior to exterior 5 In order to insert your panels into the J trims slightly curve each panel Questions 1 888 691 2944 info proslat com 6 Install first panel by screwing through the upper cavity Make sure to screw into every stud 16 along each panel Screws at each end of the panels will also go through the vertical J trims and hold them in place 7 IN ORDER TO SUPPORT 75 LBS PER SQUARE FOOT YOUR STUDS MUST BE A MAXIMUM OF 16 APART Continue installing panels making sure to properly interlock Maximum Width 16 IF YOU ARE INSTALLING WIDER THAN 8 FT OF PANELS USE TWO J TRIMS BACK TO BACK TO HIDE THE JOINT YOUR BOX CONTAINS 10 panels 2 J trims one for bottom second for left amp right sides 1 Ltrim If you have purchased your panels on costco ca in Canada your kit has an extra J trim and L trim These are only needed if you decide to install your panels in a 16 X 2 configura tion PROSLAT WALL PANELS SUPPORT UP TO 75 LBS PER SQUARE FOOT 10 YEAR LIMITE2. Fe LAT INSTALLATION WALL INSTALLATION INSTRUCTIONS PLEASE DO NOT TAKE THIS PRODUCT BACK TO THE STORE PROSLAT COM proslat videos PLEASE CALL 1 888 691 2944 96 TOOLS NEEDED DRILL LEVEL STUD FINDER SNIPS Some kits include 2 5 screws These may be too long See below for screw lengths Drywall Drywall Minimum Depth 1 5 Minimum Minimum Depth 1 5 Depth 1 5 Strapping Wood stud DIRECTLY ON STUDS USE 1 5 SCREWS OVER DRYWALL USE 2 SCREWS OVER DRYWALL AND STRAPPING USE 2 5 SCREWS 77 rue Saint Laurent Beauharnois QC Canada JON 1V1 1 Locate your stud centers and draw a vertical line to identify stud centers Measure and cut one of your J trims at 96 Install this bottom horizontal J trim at the desired height and screw into your middle stud For maximum strength always try to start and end your section over studs Making sure the bottom J trim is level install screws on the studs to the left and right hand side Do not install a screw in the first or last stud at this time 3 Install left and right vertical J trims If you have purchased only one box of Proslat panels you will need to cut your J trim in half exactly 48 5 for the left and right side Make sure to overlap the vertical J with your bottom J and screw through both Screws will be lt removed gt z lateron m c 96 14
3. D WARRANTY VISIT WWW PROSLAT COM FOR COMPLETE DETAILS
Download Pdf Manuals
Related Search