Home Decorators Collection 7400700910 Instructions / Assembly
Contents
1. gt Q DECORATORS COLLECTION Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged please contact our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST LEFT SIDE FRENCH CLEAT 1PC RIGHT SIDE FRENCH CLEAT 1PC om 0 2 T BOLT 2PCS BINDING SCREW 2PCS ALLEN WRENCH 2PCS f KNOB 4PCS KNOB BOLT 4PCS SURFACE WITH THE STICKER IS THE BACK SIDE 3 9 e PLACE FRENCH CLEAT C amp D ON THE WALL AND USE IT AS A GUIDE TO DETERMINE THE INSERTION POINTS OF THE ANCHOR d e USE A PENCIL NOT INCLUDED TO MARK THE WALL THROUGH THE PREDRILLED HOLES OF FRENCH CLEAT C amp D e USE A LEVEL NOT INCLUDED TO ENSURE CABINET A amp B WILL BE LEVEL AND PLUMB AGAINST THE WALL 6 9 e REMOVE FRENCH CLEAT C amp D AND SET IT ASIDE e USING A 3 16 DRILL BIT NOT INCLUDED DRILL HOLES MARKED ON THE WALL PLACE A PHILLIPS SCREWDRIVER NOT INCLUDED IN THE RECESSES OF ANCHOR 0 e SLOWLY TURN ANCHOR d2. CLOCKWISE WITH SLIGHT PRESSURE UNTIL THE FLANGE JUST TOUCHES THE WALL AT EACH PENCIL MARK e DO NOT PUSH AGAINST ANCHOR d USING A DRILL NOT INCLUDED 1 9 e REPOSITION FRENCH CLEAT C amp D ON THE WALL WHILE ALIGNING THE HOLES WITH ANCHORS d e INSERT SCREWS e THROUGH THE HOLES OF FRENCH CLEAT C amp D AND TURN CLOCKWISE e TIGHTEN SCREWS e INTO ANCHORS d UNTIL IT BECOMES DIFFICULT TO TURN 8 9
Download Pdf Manuals
Related Search