FloorWarm 72133 Installation Guide
Contents
1. FloorWarm QEP FloorWarm Customer Support FAQ s Q Do the wiring leads wire directly to the thermostat A On a single mat the wires could be wired direct to the thermostat and on 2 or more mats all leads have to go to a junction box first Q Does the floor sensor need to be placed under the mat A No The sensor lays next to the mat no further then 2 Q Can we splice the wiring leads A Yes but if a splice is made the wires have to be linked by using a Shrink Fit Butt Splice Connector Q Can install hardwood flooring directly over FloorWarm mats A No Q Do ohm readings need to exactly match those on mat s A No the Ohm reading could change up to of no more then 10 if this number is off then call for further assistance Q Do mats have to be installed by a certified electrician A No but the wire components are recommended to be made by a certified electrician Q Can FloorWarm be installed in a shower A No Material can not be installed anywhere water could come in direct contact Q Can I install carpet directly over FloorWarm A No must have 1 8 to 1 4 self leveling underlayment Q Can mats be wired together A No The leads from each individual mat have to be joined at a junction box Q Do I need to use the primer A Yes Q Can FloorWarm be installed outdoors A No Q How high does gang box need to be installed up wall over floor A Minimum of 18 to 36 from the floor Q Do2. I need to use a junction box even for just one mat A No Leads can be wired directly to the thermostat Q Do I need to run wiring through conduit A Yes if required by local code Q How long does it take for primer to get tacky before I can install FloorWarm mat s A Depending on conditions from 30 minutes up to 1 hour Q Should system be turned on before we install tile A Yes recommend to verify that the there were no issues with the installation Q Can we cut the mats A No Mats cannot be altered
Download Pdf Manuals
Related Search