SPT SR-1882 Use and Care Manual
Contents
1. been dropped or handled roughly If so contact customer Important Notice p service Do not operate appliance if the power cord shows any signs of damage or if appliance works intermittently or Was there a power shortage stops working entirely There may have been a power shortage at the facility where the unit is 1 A short power supply cord should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord 2 If a longer extension cord must be used being used and starving the unit of power This may also occur if you are not using a dedicated circuit Check if another appliance is drawing from the same circuit 1 The marked electrical rating of the extension cord should be at least as great as the electrical rating of Unit suddenly stops ee the appliance heating during Check if the fan is still running l l 2 The cord should be arranged so that it will not drape over the countertop where it can be pulled on by normal operation Are the air vents blocked Check if dust or grease is clogging the vents children or tripped over unintentionally Make sure enough clearance is around the unit Timer was set and unit finished the countdown This appliance has a polarized plug one blade is wider than the other To reduce the risk of electric shock Unit overheated and the auto shut off protection kicked in Wait for unit to this plug is intended to fit into a polarized outlet one way only If the p2. SPT Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase it will be repaired free of charge This guarantee is subject to the following terms Sunpentown must be notified of the fault Proof of purchase must be presented to Sunpentown s nominated representative The warranty will be void if the product if modified misused or repaired by an unauthorized person The warranty after repair will not be extended beyond the original one year period All replacement parts will be new or reconditioned Parts which are replaced become the property of Sunpentown The warranty applies for the use of the product in the USA only What is NOT COVERED Warranty does not include freight charges Incidental or consequential damage caused by possible defects with this product Damage to product caused by improper power supply voltage accident fire floods or acts of nature Failure of product resulting from unauthorized modifications to the product Improper installation or failure to perform the necessary maintenance This GUARANTEE is in addition to your Statutory Rights SUNPENTOWN INTERNATIONAL INC 14625 Clark Ave City of Industry CA 91745 Tel 800 330 0388 service sunpentown com www sunpentown com Wr Vaduction Micro Computer Induction Cooktop a fi Po it e r i 2 Mr Vuduction SR 1883G Gold SR 1883S Silver
3. SR 1882 Countertop or Built in application INSTRUCTION MANUAL Thank you for your purchase Please read thoroughly before initial use and keep in a safe place for future reference INDEX ERROR CODE Important safeguards cccccceececeeeeeeeueeeens 2 Internal circuit error Contact customer service Specifications caccccnsssasenetencterdacecineteesendosa vies 2 No cookware or incompatible cookware used Product configuration amp Control panel 3 Internal overheat Wait for unit to cool down and restart Oper tor aae 4 3 Over voltage Contact customer service TAME SEMIN soa w sien cdncii este va veueud wane benweeoreenace 4 E4 Under voltage Contact customer service Lock fUNCTION cceecceeceeseeeeeeeeeeeeneeseeeeeeen 5 Top plate sensor open short circuit Contact customer service Selecting the proper Cookware cs00eseesee 5 IGBT sensor open circuit short circuit Contact customer service Care and maintenance cccccceeceeeeeceeees 5 Top plate overheat Wait for unit to cool down and restart Eror 0 en ee en ee er eee ee ee 5 Troubleshooting aiccasctevaurasntehartvvicantenandpatmetins 6 TROUBLESHOOTING Additional safeguards ccceceeeeeee eee eees 6 PROBLEM CHECK POINTS WV ATTANEY x da viedclohoivncsdeccuiebemsehessundtacnarenceendes 7 Is cooktop firmly plugged into a correct outlet Ko nowercrunit Is cooktop plugged in a dedicated outlet ee notre oond Has the unit
4. appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any way Return appliance to the Sunpentown for examination repair or adjustment The use of accessory attachments not recommended by the manufacturer may cause injuries Do not allow cord to hang over the edge of table or counter or touch hot surfaces Do not place on or near a hot gas or electric burner or in a heated oven Do not use appliance for anything other than intended use Use of an extension cord is not recommended If needed use an extension cord of 14 gauges on diameter not longer than 10 feet Extreme caution must be used when moving an appliance containing hot oil or liquid If glass plate is broken or cracked stop using the unit immediately Turn unit off unplug and contact Sunpentown Cleaning solution or spillovers may penetrate the plate and cause an electric shock Do not place metallic objects such as utensils and lids on the plate to avoid the vessel being heated Do not attempt to disassemble the unit and perform any services Do not use the appliance with an external timer or separate remote control system This appliance is not to be used by children or persons with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure tha
5. ate If the plate is broken or cracked stop using immediately Turn unit off and unplug Household use only and do not immerse in water Do not use outdoors SPECIFICATIONS SR 1883G gold amp SR 1883S silver Model SR 1882 Voltage 120V 60Hz 120V 60Hz 1650W max Power consumption 1650W max Dimension 11 75W x 14 8D x 2 5H in 11 25W x 13 75D x 2 36 H in Weight 6 2 Ibs 5 1 Ibs Power range 100W 1650W 100W 1650W 100 F 390 F 100 F 390 F Temperature range PRODUCT CONFIGURATION amp CONTROL PANEL Exhaust Vent gt Power Cord Ceramic Plate Wr Vuduction SR 1883S Control Panel Display Child Lock Power Temperature Timer Power On Ott Timer e Decrease e Increase Function power temp power temp e Hour setting e Minute setting for timer for timer COOK Mode Heat is constantly added at the selected power level e 9 COOK levels wattage 100 300 500 700 900 1100 1300 1500 1650W factory default is set at 900W Note unit s lowest possible power is 700 watts thus the three low power settings 100W 300W and 500W cannot be actually achieved but simulated o 100W 700W intermittently heat for 1 second and stop for 6 seconds o 300W 700W intermittently heat for 3 seconds and stop for 4 seconds o 500W 700W intermittently heat for 5 seconds and stop for 2 seconds TEMP Mode Unit will heat to and maintain at selected tempera
6. ference to radio or television reception which Fan continues to The f ill ti A til unit i stel edd This i can be determined by turning the equipment off and on the user is encouraged to try to correct the run after unit is STAN WEE CONUNUS TOTUN UNU UNL S LOMDEEY COOP COWAN Mil 1s interference by one or more of the following measures aneco safety feature and designed to help preserve the life of the cooktop e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help TIMER SETTING 1 A 3 Turn unit on and set desired operation and level setting Touch the TIMER key display will show default 00 00 and Timer indicator will illuminate Touch lt button to set the hour and gt button to set the minute Max is 9 hours and 59 minutes Each touch is increment of 1 hour or 1 minute touch and hold for 3 seconds for quick adjustment 4 After setting touch TIMER key again to confirm or wait until the display stops flashing 5 At the end of countdown unit will stop operation beep once and return to standby mode To cancel Timer touch and hold the Timer key LOCK FUNCTION 1 2 3 Touch the LOCK key to lock the control panel the Lock indicator will illuminate When locked none of the button
7. lug does not fit fully into the outlet cool down Check for error code in the display reverse the plug If it still does not fit contact a qualified electrician Do not modify the plug in any way Pand beat Are you using an extension cord Any use of an extension cord over 10 a a l l l Sire ate a feet will affect the power from reaching the cooktop Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance Hd g i It is possible that the internal coil supports may have been dropped due could void the user s authority to operate the equipment is ie Seah VARAG to the unit being mishandled or frequently moved Please contact NOTE This equipment has been tested and found to comply with the limits for a consumer ISM equipment customer service pursuant to Part 18 of the FCC Rules These limits are designed to provide reasonable protection against Pan cooks Is base of cookeware convex concave shaped or dented harmful interference in a residential installation This equipment generates uses and can radiate radio unevenly or does Pan is smaller than 4 75 or larger than 10 25 frequency energy and if not installed and used in accordance with the instructions may cause harmful not maintain heat Pan may not be anand a interference to radio communications However there is no guarantee that interference will not occur in a level particular installation If this equipment does cause harmful inter
8. s will respond To cancel lock function touch and hold the Lock key for 3 seconds SELECTING THE PROPER COOKWARE The base of the cookware must be of a ferrous metal metal that can be magnetized Cast iron enameled iron steel and stainless steel Base of cookware should be between 4 75 to 10 25 inches bottom should be flat A simple test to check if cookware will be compatible is to take a small magnet and place it to the bottom of pan If the magnet firmly sticks the cookware is compatible These type of cookware will NOT work with inductions Glass copper aluminum ceramic cookware with a concaved bottom bowl shaped cookware or those with a diameter smaller than 4 75 inches CARE amp MAINTENANCE Unplug unit from power source Wait for surface to cool down before cleaning Wipe ceramic plate and exterior surface with a soft damp cloth If excessively dirty soak cloth in a mild detergent and water mixture Clean the air vent regularly with a small brush Never immerse the unit in liquid or wash under running water The fan continues to run for couple minutes after operation for heat dissipation To prolong the life of the unit wait for the fan to stop before unplugging from power source IMPORTANT SAFEGUARDS Read all instructions Do not touch hot surfaces Close supervision is necessary when any appliance is used by or near children Unplug from outlet when not in use and before cleaning Do not operate any
9. t they do not play with the appliance Changes of modification not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment To avoid scalding and foul fumes produced by cleaning solutions on a hot surface wait for the unit to cool considerably before cleaning Place cooktop on flat surface and keep a clearance of 4 inches all around for proper ventilation If air inlet or outlet is blocked the internal temperature will rise and cause unit to overheat and shutoff during cooking Do not place paper or cloth in between the cooktop and cookware Due to the magnetic heating of the unit keep objects that may be affected away such as credit card watch etc To prevent damage to your cookware do not heat an empty pan Do not place one cooktop on top of another Do not place on or near a hot gas or electric burner or in a heated oven If the surrounding temperature is high unit will shut off Do not use cookware of inferior enamel synthetic material china or aluminum DO NOT USE PLASTIC WRAP Never heat an unopened can on the cooktop as it may explode The ceramic plate will retain heat from the cookware never touch the ceramic plate immediately after cookware is removed Wait a few minutes and allow unit to cool Plug cooktop in a dedicated 15 amp outlet Do not share the outlet with other appliances Do not damage the ceramic plate Be careful not to drop anything onto the ceramic pl
10. ture e 13 TEMP settings F 100 120 140 160 180 190 210 230 250 280 320 350 390 factory default is set at 210 F e Temperature may vary slightly at different sections of the pot e Factors such as ambient temperature type of cookware and food content may cause temperature variance up to 20 F OPERATION 1 Plug power cord to power source and unit will beep once and the On Off indicator will flash This indicates power is connected and unit is in standby mode 2 Place a suitable cookware in the center of the cooking zone 3 Touch the On Off key and display will show and On Off indicator remains lit Appliance is now in selection mode 4 Touch the Mode key to select desired function Cook or Temp to begin operation If no selection is made within 60 seconds the fan will run for few seconds and unit will return to stand by mode 5 Touch the lt or gt button to adjust cooking level or temperature setting 6 Touch the On Off key again to stop operation
Download Pdf Manuals
Related Search