Vinotemp VT-WINEDISP4 Use and Care Manual
Contents
1. A PROUD HERITAGE OF EXPERIENCE QUALITY YS A l A P 4 BOTTLE WINE DISPENSER DISPENSER amp PRESERVER VT WINEDISP4 OWNER S MANUAL WWW VINOTEMP COM General Operating Instructions Remove all external and internal packaging from your appliance Be sure that all parts have been included before discarding any packaging materials You may want to keep the box and packing materials for use at a later date Upon receipt and inspection of unit the supply cord must be replaced if it is damaged Contact our customer service at 1 800 777 8466 or info vinotemp com READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE Save these instructions SERVING WINES Storing wines at the proper temperature is important To preserve them as long as possible wine should be stored at approximately 55 Fahrenheit However the chart below suggests the optimal drinking temperature for the different styles of wine Wine Style oe ra Pets eis Sar SES e mem EXE Non Vintage Sparkling WWW VINOTEMP COM TABLE OF CONTENTS IMPORTANT SAREN EE a Eege LE 4 ELECTRICAL CONNECTION HE 5 PARTES EE Eege 6 INSTALLATION INSTRUCTIONS a ssnspanadsana sonia rosas des is ol Tas eme OPERATING YOUR WINE DISPENSER pera soe na Ra ADEREM CARE AND MAINTENANCE aaa NAAN 9 CIRCUTE DIAGRAM rare aero rd dde ER 9 TROUBEE e leien E G aria ride ea 10 TERMS SALE AND WARRANTY EE 12 17621 South Susana Road Rancho Dominguez California 9022. 21 info vinotemp com IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire electrical shock or injury when using your appliance follow these basic precautions e Read and follow all instructions before use e Do not operate this or any other appliance with a damaged cord e Always unplug the appliance before performing any care or maintenance e Exercise caution and use reasonable supervision when appliance is used near children Never allow children to operate play with or crawl inside the appliance Keep packing materials away from children e Do not clean appliance with flammable fluids Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance The fumes can create a fire hazard or explosion e Toclean only use mild detergents or glass cleaning products Do not use solvent based cleaning agents or abrasives e Do not operate with housing panels removed or damaged e When disposing of refrigerated appliances special handling is often required It is the consumer s responsibility to comply with federal and local regulations when disposing of this product e Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual All other servicing should be referred to a qualified technician e Locate the unit away from direct sunlight and sources of heat stove heater radiator etc e Do not use this appliance for
3. If an order has been placed and production has started cancellation of your order will be a 15 charge If Purchaser tenders payment with a check that has insufficient funds NSF or stops payment on a check or credit card for any reason Purchaser agrees to pay for all costs associated with the Seller s connection or litigation of such a claim including without limitation extra damages court costs and attorneys fees Finance charges begin the date of invoice Collection fees plus NSF fee of 50 will be added to your invoice which you agree to promptly pay Title to the goods does not pass until payment is received in full by Seller and Seller retains a security interest in the goods until they are paid for in full LIMITED WARRANTY Seller warrants that the goods will be free of defects in materials and workmanship as follows For the wine dispenser units parts and labor for cooling system and cabinetry for a period of 12 twelve months from date of sale removal and re installation of unit is not included in warranted labor For a scratch and dent or refurbished unit warranty is 3 months from your dated invoice parts for function only not cosmetic There is no warranty on parts purchased separately Purchaser s exclusive remedy is limited at Seller s option to repair or replace defective part s with either new or factory reconditioned part s Purchaser is responsible for shipping the unit pre paid to designated facility and Seller wil
4. Rancho Dominguez California 90221 info vinotemp com PARTS AND SPECIFICATIONS This refrigerated wine dispenser displays stores and dispenses 4 opened wine bottles keeping them fresh from oxidation for up to 45 days Wines can be maintained at a chosen storage and serving temperature between 45 and 65 F NSF approved plastic components and sanitary stainless steel spouts and electronic valves keep wines clean and prevent any drips from spouts Easily dispense a perfect glass of wine at any time with just the touch of a button temperature temperature setting display wine dispensing wine dispensing button button cranium _ light on off Stainless steel spout face panel displayed bottles leveling leg anti UV door Model No VT WINEDISP4 NOTE Argon and nitrogen gas cartridge gas weight of approximately 14 grams not included Suitable standard gas cartridges are non refillable and have a threaded neck size of 20 and minimum length of 0 5 The cartridge must have a diameter not exceeding 1 75 and a length not to exceed 5 5 WWW VINOTEMP COM INSTALLATION INSTRUCTIONS Before Using Your Unit Remove all packing material before using your wine dispenser Check to be sure the appliance is in good condition Use a soft dry cloth to wipe down the outside of the wine dispenser thoroughly Before connecting your wine dispenser to the power source let the unit stand upright for 24 hours
5. This will reduce the possibility of a malfunction in the cooling system from handling during transportation Locating Your Unit The wine preserver dispenser is designed for free standing installation only It is recommended that this unit be kept in a location with an ambient temperature range of 45 F 90 F Not intended for garage or basement installation Place your wine dispenser on a solid level surface other than carpet This will ensure vibration and noise free operation Use the adjustable legs to ensure that the unit is level Leave a 5 inch clearance on all sides of the unit This is to ensure proper circulation OPERATING YOUR WINE DISPENSER Loading Unloading Argon Nitrogen Inert Gas Cartridge 1 Press and hold the wine dispensing button A to empyt the remaining gas in the cartridge Unplug the unit Rotate the cover upwards to access the gas cartridge Pull the cartridge and turn it counter clockwise to loose Place a new cartridge and align it to the neck thread of regulator rotatge it clockkwise only 1 turn to position properly then turn clockwise all the way to tighten 6 Move the cartridge back and close it Ul BW N NOTE It is normal that a little gas escapes when the gas cartridge is being tightened to the regulator open cover xX tighten 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com Attaching and Removing Wine Bottles 1 Unscrew lower part of bottle fix
6. WITH YOUR WINE DISPENSER Most common problems can be solved easily saving you the cost of a possible service call Try the suggestions below to solve the problem before contacting Vinotemp at info vinotemp com TROUBLESHOOTING a Power cord unplugged a Check for power cord plug b No Power to unit b Check power at receptacle amp fuses c Power switch off c Turn power switch on d Incorrect or loose wiring d Check all wiring amp connections Unit running too a Improper cabinet seals a Check door gasket and opening long or continually b Ambient temperature high b Check for proper installation location or increase setting c Iced evaporator c Defrost and reset temperature d Low voltage d Check power supply e Sealed system problem e Call service for checking loss of refrigerant or restrictions f Undercharge or overcharge f Call service to add or remove refrigerant Temperature too a Improper cabinet seals a Check for gasket and door opening high b Setting too high b Lower setting c Ambient temperature too high c Check for proper installation location d Iced evaporator d Defrost and reset temperature e Low voltage e Check power supply f Sealed system problem f Call service for checking loss of refrigerant or restrictions g Undercharge or overcharge g Call service to add or remove refrigerant Compressor a Incorrect temperature setting a Set 55 to 60 F stopping and b Incorrect voltage b Check for volt
7. age starting but short c Failed thermistor or components c Check and replace as needed running time d Overcharge of refrigerant d Call service for removing refrigerant e Discharge or suction pressure too high e Call service for OEM information a Refrigerant leakage a Unit must be checked for loss of refrigerant and proper charge b Low voltage to unit b Make sure unit received proper voltage c Fans do not turn c Fans must be replaced Noisy operation a Mounting area not firm a Make sure unit is level and on flat solid surface b Malfunctioning components b Call for service information Unit not dispensing a Argon Nitrogen empty a Check for cylinder pressue b Bottle not tightened b Check for bottle fixer and if gas escaping c Defective bottle plug c Check for bottle plug and if gas escaping d Gas tubing blockage d Check for gas tubes e Defective gas solenoid valve e Remove bottle press button to check if gas escaping f Defective wine solenoid valve f Switch the problem valve to a good one g Incorrect or loose wirings g Check all wirings and connections Compressor running but not cooling Dispensing a Argon Nitrogen low a Check pressure and change a new cylinder b Tubes kinked twisted b Check for tubes c Bottle neck leak c Check for plug fixer d Gas solenoid valve restricted d Remove bottle press button to check if gas escaping e Wine solenoid valve restricted e Switch the problem valve to a go
8. any difficulty carrier incurs in attempting to fit the goods into the Purchaser s place of business or residence due to the size of the goods or otherwise Purchaser assumes all responsibility for delivery payment of freight access measurement installation hook up wiring moving and storage of the goods The transportation of all goods is subject to the terms and conditions which the moving carrier imposes on Purchaser including but not limited to additional charges imposed per flight of stairs and or additional charges resulting from the carrier s inability to safely and or adequately use the building elevator to lift the goods to an upper floor Any claim for damages incurred during shipment by the carrier of the goods are insured and handled directly with the carrier Any damages due to manufacture defects will be handled directly with Vinotemp International subject to the limited warranty All sales are final and unless authorized in writing by the Seller Purchaser may not return the goods under any circumstance If Purchaser refuses to accept the goods under any circumstance the Purchaser is liable for the return and cost of freight both ways and if Seller does take back the goods there will be a restocking charge that is 35 of the purchase price of the goods Custom Cabinet and Racking are non returnable Purchaser must notify Seller of nonconforming goods within four days of delivery after which time all goods are deemed accepted
9. f incidental or consequential damages or a waiver of the implied warranties of fitness and or merchantability so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to the goods sold generally Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise to the claim and wait an additional thirty days for a response before initiating any legal action The sale and all terms are subject to California law Any legal proceeding arising out of or relating to these terms and conditions or to the goods sold generally shall be brought solely and exclusively in the County of Los Angeles In no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind These Terms and Conditions can only be modified in writing signed by both Purchaser and Seller 04 07 WWW VINOTEMP CO SERVICE amp IMPORTANT NOTICE Upon receipt and inspection of unit the supply cord must be replaced if it is damaged Contact our customer service at 1 800 777 8466 or info vinotemp com The manufacturer has a policy of continu
10. l pay return shipping charges in the continental United States for items repaired under warranty within 12 twelve months from date of sale Improper placement of the unit will void the warranty This limited warranty does not cover damage due to such things as accident misuse abuse mishandling neglect acts of God fires earthquakes floods high winds government war riot or labor trouble strikes lockouts delay of carrier unauthorized repair or any other cause beyond the control of the Seller whether similar or dissimilar to the foregoing Seller is not responsible for any damages caused to Purchaser s property resulting from the good This limited warranty applies only inside the Continental US Alaska Puerto Rico and Hawaii are not warranted Purchaser understands and acknowledges that the goods sold here are wine cellars cigar humidors and or other similar units which house wine or cigars Purchaser assumes all risk of using these units including risk of spoilage humidity variations temperature variations leaks fire water damage mold mildew dryness and similar and any other perils that might occur Seller is not responsible for incidental or consequential damages and there are no warranties expressed or implied which extend beyond the Limited Warranty described above The implied warranties of merchantability and of fitness for a particular purpose are hereby expressly disclaimed Some states do not allow the exclusion o
11. nnect electric supply from appliance before servicing Replace all panels before operating Failure to do so could result in death or electrical shock To avoid the risk of electrical shock property damage personal injury or death e The power cord must be plugged into a 3 prong grounding type wall receptacle GROUNDING TYPE grounded in accordance with the National Sp Electrical Code ANSI NFPA 70 latest WALL RECEPTACLE edition and local codes and ordinances e It is the personal responsibility of the consumer to have the proper 3 prong wall receptacle installed by a qualified electrician e DO NOT UNDER ANY CIRCUMSTANCE REMOVE THE POWER CORD GROUNDING PRONG e A separate adequately fused and grounded circuit should be available for this appliance e Do not remove any grounding wires from individual components while servicing unless the component is to be removed and POWER SUPPLY CORD replaced It is extremely important to WITH 3 PRONG replace all grounding wires when GROUNDING PLUG components are replaced e DO NOT USE A GROUND FAULT INTERRUPTER GFI e A DEDICATED 15 AMP CIRCUIT IS HIGHLY RECOMMENDED Electrical Cord We strongly recommend against the use of an extension cord However if you still elect to use an extension cord it is necessary that it be a properly rated UL listed 3 wire grounding type appliance extension cord with a 3 blade grounding plug and a 3 slot receptacle 17621 South Susana Road
12. nut and place it on the neck of desired wine bottle 2 Slide bottle upward with gas and wine tube inside the bottle 3 Fit bottle mouth into silicon plug If bottle mouth is larger lift upper part of bottle fix nut to free silicon plug completely and ease bottle mouth into the silicon plug first 4 Tighten lower part of bottle fix nut to the upper part o Press the dispensing button to allow wine out and check to see if gas leakage will occur Reconnect tighter if needed so gas does not escape D Place wine fully in refrigerated cabinet and close door BUTTLE FIX NUT SILICON PLUG GAS TUBE WINE TUBE WINE BOTTLE Once the wine dispenser is positioned and plugged in turn the power on NO 4 DO DO a fo setz DE Dispensing Wine The wine dispenser features two sets of two dispensing buttons each positioned directly above its corresponding wine bottle spout The two dispensing button options are o A Press and hold the 4 button over the desired spout to begin dispensing wine into your glass Wine will continue to be dispensed until the button is released o D Press the button to dispense wine in 10z increments Press it once to dispense 10z twice to dispense 20z and so forth Setting the Temperature The temperature Se will show the current temperature inside the unit To set a temperature press and hold the amp button till the display shows H1 and the displayed temperature starts to fla
13. od one interrupted or slow WWW VINOTEMP CO TROUBLESHOOTING Wine spurting or a Wine tube restricted a Check any restrictions Spitting b Bottle near empty and too much nitrogen b Change a new bottle in the bottle c Nitrogen ptessure too high c Reduce the pressure to 3 psig d Wine solenoid valve dirty d Clean solenoid valves Wine dripping a Solenoid valve seat leak a Check for debris if constant dripping b Spout leak at solenoid valve fitting b Push to tighten spout if intermittent dripping Spout drop a Wine tube leak a Check for wine tube b Empty bottlea b Change bottle Wine divided a Debris in spout a Clean out debris Too much bubble a Argon Nitrogen pressure too high a Reduce the pressure to 3 psig Gas escaping a Bottle not tightened a Check for plug fixer b Gas tube broken b Check for gas tube 17621 South Susana Road Rancho Dominguez California 90221 11 info vinotemp com TERMS OF SALE AND WARRANTY Vinotemp International Seller and the person or entity that acquires these goods from Seller Purchaser hereby fully agree to the following terms and conditions of the sale Shipping fees are the responsibility of the Purchaser whether freight prepaid or freight collect Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Seller s premises including but not limited to late delivery by the moving carrier or for events caused by
14. other than its intended purpose e Do not store food in cabinet e Do not place any other appliance on top of the unit e For adult use only e Do not lift or carry the wine dispenser by the cord e Do not plug in to the power socket before setup is complete e When positioned or if moving the appliance ensure that it is not set horizontally positioned at an angle of more than 45 or turned upside down e Place the appliance on a solid level surface Allow for proper clearances on all sides of the unit e The wine dispenser is an electrical appliance To avoid injury or death from electrical shock do not operate the unit with wet hands while standing on a wet surface or while standing in water e Allow unit to stand upright for 24 hours prior to first plugging it in e This unit is designed for indoor household use only Any other use will void the warranty WARNING Risk of child entrapment and suffocation Before you throw away this or an old unit take off the door Leave the shelves in place so that children may not easily climb inside WARNING Gas cartridge contents under pressure Do not puncture or incinerate Keep away from heat and out of direct sunlight Keep away from sharp objects that could puncture chamber Do not store in an enclosed vehicle Do not discharge towards face or body KEEP OUT OF REACH OF CHILDREN Ge WWW VINOTEMP CO ELECTRICAL CONNECTION A WARNING ELECTRIC SHOCK HAZARD Disco
15. ous improvement on its products and reserves the right to change materials and specifications without notice WARNING Please do not place the unit within reach of children For adult use only Contact info vinotemp com with any questions or visit www vinotemp com Cue 17621 S Susana Road Rancho Dominguez CA 90221 www vinotemp com Vinotemp is a registered trademark of Vinotemp International All products features and services are subject to change without notice We cannot guarantee the accuracy of the contents of this document We disclaim liability for errors omissions or future changes 2010 Vinotemp International All rights reserved 17621 South Susana Road Rancho Dominguez California 90221 13 info vinotemp com
16. sh Once the temperature display starts to flash use the a or Y buttons to select your desired temperature For wine to stay fresh up to 45 days bottles must be closed and unit preservation system must be properly sealed to prevent deterioration Keep wine at proper temperature in unit LED Light The LED light can be switched on or off by pressing the O button WWW VINOTEMP CO CARE AND MAINTENANCE IMPORTANT Always unplug your wine dispenser before cleaning or performing maintenance Never use harsh cleansers or scouring pads to clean any part of the wine dispenser Cleaning To clean the bottle fixer and solenoid valve 1 Fill a bottle with clean warm water and place the bottle fixer onto the bottle rr 2 Press and hold the 8 button to begin dispensing the warm water 3 Continue to dispense and flush the system until dry argon comes from the spout CIRCUIT DIAGRAM Game Solenoid Valve Heat Protector Compressor Vom Ty Ei na Ia Sp ee a ait Ps m Ce Wi e ES Switch H o ER wen Ea B nm E L 120V 60Hz Plug HF Wine solenoid _ valve B Safety valve o ine tube Gas valve Bf Wine bottle B Ir ne Gas valve A _ Gas tube Gas regulator D Argon cartridge Wine solenoid valve A 17621 South Susana Road Rancho Dominguez California 90221 info vinotemp com PROBLEMS
Download Pdf Manuals
Related Search