InSinkErator 11327G Instructions / Assembly
Contents
1. erator FOODSERVICE Mounting Adaptor 11327 G This adaptor will fit a sink opening of 7 I D and 7 3 8 O D i Sink Bowl 1 Mounting Flange Connection Lip Threaded Fasteners 2 Mounting Gasket 11341 n 8 Disposer KL Body Flange 3 Screw 7 N 1491 a Keyholes Installation Instructions Place mounting flange 1 up over existing sink bowl connection lip It may require a slight force fit Push mounting flange 1 up out of the way and fit inside groove of mounting gasket 2 onto the sink bowl connection lip Move mounting flange 1 down over mounting gasket 2 Be certain that the threaded fasteners in the mounting flange 1 fit into recesses in the top of the mounting gasket 2 Attach two screws 3 through opposite holes in the mounting gasket 2 and into the threaded fasteners in the mounting flange 1 The screws 3 should be protruding approximately 1 4 inch below the mounting gasket 2 Position the disposer beneath the mounting gasket 2 and engage the two protruding screws in the keyhole slots in the disposer body flange Assemble the remaining four screws 3 and turn the disposer into place for plumbing connections Tighten all screws evenly to secure the unit Part No 13966 G October 2007
Download Pdf Manuals
Related Search