SPT SD-1502 Use and Care Manual
Contents
1. e Clean the dish dryer inside DO NOT clean the dish dryer while in operation Doing so may cause damage or personal injury TROUBLESHOOTING PROBLEM Unit will not start when Timer Switch is ON SOLUTION 1 Check to be sure that the power cord is plugged into a 120V AC outlet 2 Check the electrical outlet by plugging in a working appliance TECHNICAL SPECIFICATIONS Model SD 1502 Width 10 63in Height 14 76in Weight 8 42lbs Input Voltage 120 volts AC 60Hz 200W CUSTOMER ASSISTANCE LINE If you experience a problem please see the warranty for information Please DO NOT attempt to repair this unit yourself Doing so will void your warranty and could cause damage to the fan or personal injury to yourself If you have any questions concerning this appliance please call 1 626 336 2299 SPT Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase it will be repaired free of charge This guarantee is subject to the following terms Sunpentown must be notified of the fault Proof of purchase must be presented to Sunpentown s nominated representative The warranty will be void if the product if modified misused or repaired by an unauthorized person The warranty after repair will not be extended beyond the original one year period All replacement parts will be new or reconditioned Parts which are replaced become the pr2. Heating can cause burns 12 This dish dryer requires regular cleaning BEFORE using the dish dryer check the power cord for any signs of damage If the cord is found to be damaged DO NOT USE and return the dish dryer to the manufacturer under the warranty agreement for repair This appliance has a polarized plug one blade is wider than the other To reduce the risk of shock this plug is intended to fit only one way in a polarized outlet If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE Plug the dish dryer into a 120V AC electrical outlet and turn control to the ON position To disconnect the dish dryer first turn control to the OFF position grip the plug and pull from the wall outlet Never pull the plug by the cord A loose fit between the AC outlet receptacle and plug may cause overheating and a distortion of the plug Contact a qualified electrician to replace loose or worn outlet Never tilt or attempt to move the humidifier while it is operating or filled with water UNPLUG the dish dryer before moving INTRODUCTION Thank you for purchasing SPT DISH DRYER HOW DOES IT WORK As air is pulled into the unit it first passes through the Heat System where it is heated The hot air is then pulled into the unit s interior where it circulates and dries the dishes MODEL SD 1502 Your dish drye
3. Spi DISH DRYER OWNER S MANUAL Model SD 1502 NOTE AFTER READING THIS MANUAL IF YOU HAVE ANY QUESTIONS OR COMMENTS ON YOUR SUNPENTOWN DISH DRYER HUMIDIFIER CALL 1 909 468 5288 THIS UNIT CANNOT BE USED IN FOREIGN COUNTRIES AS DESIGNED FOR USE IN USA ONLY EQ SUNPENTOWN INTERNATIONAL INC IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS DISH DRYER When using electrical appliances basic precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following 1 Always place this dish dryer on a firm flat and level surface This dish dryer may not work properly on an uneven surface Place this dish dryer in an area where it is not accessible to children Do not cover it Do not place the dish dryer near any heat sources such as stoves radiators heaters or high moist freezing areas Do not move the dish dryer while it is operating Unplug and take out the tableware before moving Do not over load or place too many heavy objects inside doing so may deform the housing Do not place painted or non heat resistant tableware into device which may discolor and or deform the tableware Make sure to use attached tableware shelf Do not block the heating outlet This will damage the device itself sey Se ee I 2 Do not pour water into the heating outlet 10 Do not dip the dish dryer in water 11 DO NOT touch the heating outlet
4. operty of Sunpentown The warranty applies for the use of the product in the USA only What is NOT COVERED Warranty does not include freight charges Incidental or consequential damage caused by possible defects with this product Damage to product caused by improper power supply voltage accident fire floods or acts of nature Failure of product resulting from unauthorized modifications to the product Improper installation or failure to perform the necessary maintenance This GUARANTEE is in addition to your Statutory Rights SUNPENTOWN INTERNATIONAL INC 14625 Clark Avenue City of Industry CA 91745 Tel 626 336 2299 Fax 626 336 7116 service sunpentown com www sunpentown com
5. r is made up of these parts all TURAL UT ey HA WINDOW TOP TABLEWARE SHELF 1 woe WATER TRAY WATER LEVEL CHOPSTICK BASKET INLET PLUG SHAFT CAP VENT HEATING OUTLET CONTROL PANEL FILTER POWER CORD SETUP e Select a firm level and flat location at least six inches 15 cm from wall or cabinets for proper airflow Place the dish dryer on a water resistant surface as water can damage furniture and flooring CAUTION DO NOT POUR WATER INTO THE HEATING OUTLET INSIDE THE DISH DRYER DOING SO MAY DAMAGE THE DEVICE OR CAUSE PERSONAL INJURY OPERATION POWER CAUTION DO NOT PLUG IN THE DISH WASHER WITH WET HANDS AS AN ELECTRICAL SHOCK COULD OCCUR e Plug the dish dryer into a polarized 120V outlet DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET it will only fit one way TIMER SWITCH Power light Timer 8 120 20 100 40 80 60 e Turn the timer switch to the desired time setting between 0 120 minutes e The power light will come ON e Once the timer is off the power light will go OFF as well MONTHLY CLEANING We recommend cleaning the dish dryer monthly The WATER TRAY should be checked often Please pour out water once the tray is full e Turn off and unplug the dish dryer Wait at least 10 minutes for the unit to cool CLEANING REMOVE THE DOORS LOOSE FESS e Remove the shaft cap by turning counterclockwise e Remove the doors and set aside
Download Pdf Manuals
Related Search