LightIt! 20020-108 Instructions / Assembly
Contents
1. and prevent the light from operating correctly Whenever possible the lamp should be placed at least 30 feet away from the street or located in a shielded area to prevent activation by cars pedestrians or animals Please note also that shaded areas may cause the light to be activated during the day and that reflective surfaces light colored walls swimming pools or ponds may trigger the motion sensor causing false activation Automatic Operation The motion sensor s maximum detection distance is 12 feet and has a detection angle of 60 The detection point is easily controlled by turning the sensor toward or away from the target area Do not place solid objects in front of the sensor as it will impair or prevent detection The light will remain on as long as motion continues to be detected It will turn off automatically approximately 30 seconds after motion has ceased For added safety and convenience we recommend operating the lamp manually while performing tasks and during power emergencies Care amp Maintenance The 8 LED Sensor Lamp will provide many years of reliable service with only minimal care We recommend cleaning it with a slightly dampened cloth Batteries should be replaced promptly when the light grows dim and removed altogether if the lamp is not used for a lengthy period Never mix battery types e g alkaline and rechargeable and keep the battery compartment free of debris Although the lamp may be used outdoors it is n2. LIGHT IT 8 LED Sensor Lamp Instructions PLEASE REVIEW ALL INSTRUCTIONS AND DIAGRAMS CAREFULLY BEFORE ASSEMBLING AND USING THE LAMP Features amp General Information The 8 LED Sensor Lamp is a battery operated portable light with a built in motion sensor which automatically turns on the light when a moving heat source is detected The light comes on for approximately 30 seconds and remains on as long as motion continues to be detected in the area The Table Lamp also has a built in photo sensor which prevents the light from being activated during daylight hours The Sensor Lamp has a 3 position switch which gives the user the option of operating the light manually or using automatic control motion sensing It is ideal for use in bedrooms or bathrooms as a night light or for use as emergency light when power fails It is also perfect for camping boating and RVs anywhere you need light for added safety security or convenience The Sensor Lamp uses 4 C cell batteries Alkaline batteries are recommended Under normal conditions batteries will last anywhere from 6 months to one year depending on the frequency of activation The eight ultra bright Floodlight LEDs will last for more than 100 000 hours and will never need to be replaced Assembly Please review this illustration first STEP 3 Place the locking cap into the circular recess located on the top of the lamp shade see Fig C Simultaneously press an
3. d rotate the locking cap clock wise until the cap locks onto the lamp shade support STEP 2 Place the lamp shade onto the top of the lamp shade support and align the two locking posts see Fig B with the holes located in the top middle portion of the lamp shade see Fig C STEP 1 Insert the bottom of the lamp shade support into the top hole of the lamp base see Fig A Using gentle downward pressure rotate the support clockwise until it locks into place lamp base ay Note The lamp shade cannot be removed after it has been assembled Inserting Batteries Open the battery door located at the bottom of the lamp base by rotating it ina counter clockwise direction Slide out the battery case and insert 4 C size batteries taking care to install them in the direction shown on the case Replace the battery case making certain that the contacts are correctly aligned Replace the battery door and rotate it clockwise to lock it Basic Operation E Slide the switch to Sensor position for automatic on off operation Slide the switch to Off position to turn off both the sensor and the light Slide the switch to On position to turn on the light only no sensor Selecting Location The 8 LED Sensor Lamp should not be placed near heat sources such as air condition ers exhaust vents or space heaters Street lights or other lights may be detected by the photo sensor
4. ot water proof and should be stored in a clean dry environment ATTENTION To avoid damage to the electrical components please observe the following precautions Do not aim the sensor directly towards the sun E Do not shake or drop the light Do not expose the light to static electricity Note that the circuit requires 90 180 seconds to stabilize after the batteries are inserted WARNING Do not look directly into the LED s and do not shine them into eyes of others SPECIFICATIONS Batteries 4 C cell alkaline or Ni mh Voltage 6V DC Light Duration 30 4 seconds Detection Angle 60 cone Maximum Detection Distance 25 feet
Download Pdf Manuals
Related Search