Kenroy Home 20813BS Installation Guide
Contents
1. ITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG D sreS Intertek 4007242 20813BS INSTRUCTIONS2. MODkL 20815 PACKING DIAGRAM ARDBOARD a ARM ASSEMBLY amp SOCKET RING ARDBOARD SHADE BOX BASE SET SCREW 1 amp WRENCH CARDBOAR ARM ASSEMBLY SET SCRE 1 a E ASSEMBLY INSTRUCIIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE SOCKET RING SHADE ARM ASSEMBLY WITH SOCKET BASE SET SCREW AND WRENCH TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAVM 2 INSERT THE CORD INTO POLE THEN INSERT PIN ON TOP OF BASE INTO POLE AND SECURE WITH SET SCREW WRENCH INCLUDED 3 PLACE SHADE OVER SOCKET AND SECURE WITH SOCKET RING 4 INSTALL A 100 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 8 YOU CAN ADJUST THE LAMP HEIGHT BY LOOSENING HANDLE TO GET THE DESIRED POSITION 6 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH 12 2010 20813SHBS REPLACEMENT PART SOCKET RIN AVAILABLE PART IS 20813SHBS SHADE BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE W
Download Pdf Manuals
Related Search