Reach Barrier 3122 Installation Guide
Contents
1. Radiant Barrier E Proudly Made in the U S A SILVERTANIUM NOTE There is no right side to the panels Just pick the side you wish to look at Practice Step 1 It is best to use the extra size of the panel to help hold the panel in place Simply push and move the panel in the proper position within the panel to the desired fit before using the Stick ems adhesive squares The panels can be trimmed but only if necessary Once you see how the panels will fit proceed to the next step Step 2 Peel off backing of a Stick ems and stick one 1 in each of the four corners of the garage door panel and one 1 in the center as shown Once the Stick ems have been stuck to the door peel off the top layer of paper to reveal the other sticky surface below Step 3 Once you have the Stick ems in place and removed the paper to reveal the sticky surface the radiant barrier panels can be pushed into place like you did in practice Step 1 Finish Stick ems require 24 hours to become fully stuck 3122 Garage Door Insulation Kit Install Instructions Begin by cleaning the surface of the inside door panels where the adhesive squares Stick ems will Alf be used to hold the radiant barrier panels in place For improved thermal performance add 3 4 air space between Reflective Air and door This can be done by attaching to door framing rather than to the door panel2. NOTE There are eight 8 radiant barrier panels in the kit Each panel is 4 feet in length It is recommended that you use five 5 Stick ems per panel 48 squares are included in your kit to complete the installation REACH Barrier LLC 860 N Dorothy Dr Suite 608 Richardson TX 75081 972 331 3933 www reachbarrier com sales reachbarrier com
Download Pdf Manuals
Related Search