Builders Edge 130110003078 Installation Guide
Contents
1. the fixture 6 20 02 Step 4 Cut the siding around the Slim Line Master Mount Install the siding according to the manufacturer s installation instructions See Figure 4 at right Step 5 Install the the trim ring by locking it into place See Figure 5 at right Step 6 Install the light fixture or electrical device per the manufacturer s installation Instructions Be sure that all electrical product gaskets have the proper sealant See Figure 6 at right lt n af i Figure 62. Slim Line Master Mount Instal lation Instructions CAUTION All electrical connections must be in accordance with state and local codes ordinances and the National Electrical Code If you are unfamiliar with methods of installing electrical wiring and devices To be installed prior to siding P 9 secure the services of a qualified licensed electrician Step 1 Remove the trim ring from the Slim Line Master Mount Assembly See Figure 1 at right Step 2 Cut the desired opening in the Slim Line Master Mount by cutting along the patterns provided on the back of the part See Figure 2 at right Step 3 Center the Slim Line Master Mount over the outlet box Be sure to place tape or sealant between the Slim Line Master Mount and the house Attach the Slim Line Master Mount securely using an 8d nail or equivalent with a minimum of four attachments See Figure 3 at right Note The sheathing on the illustration at right has been removed for clarity The outlet box should be in contact with the under side of the Slim Line Master Mount Note The use ofa box extension supplied by others may be required by your local or state electrical codes Alternatively the box can be repositioned so that it contacts the underside of the Slim Line Master Mount l 0081 PAPC 9560 Note Common sense caution and care are factors which cannot be built into any product These conditions must be supplied by the person s installing
Download Pdf Manuals
Related Search