Werner AP-20 Instructions / Assembly
Contents
1. a PW N 4 Product designed to support the weight of one person and material 5 Lubricate hinge mechanism regularly 6 For additional information amp instruction contact Werner Co 93 Werner Road Greenville PA 16125 724 588 8600 1 Face platform when climbing up or down steps 2 Always keep body centered between side rails 3 Never climb platform from the side unless secured from sideways motion and tipping 2004 Werner Co Rev A 9 04 P N 63293 012. 2 Use extra caution near operating machinery 3 Acids such as muriatic or hydrochloric are corrosive to aluminum and can seriously affect strength Do not expose unit to corrosive substances SAFETY INSTRUCTIONS WARNING FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY 2 1 Rotate legs into position then lock hinges See hinge operation label located near each locking hinge Place work platform on firm level ground Do not use on slippery surface Make sure that the installation and use does not violate any federal state or local codes 4 Never place anything under or attach anything to unit to gain height 1 or to adjust for uneven surfaces Maximum weight not to exceed duty rating see other labels Read and understand all instructions and warnings before use 3 Inspect before use Do not use if damaged If any parts are missing do not use Examine thoroughly to make sure unit is set up properly Do not use any components not supplied or approved by Werner Co Keep fingers clear when opening and closing Keep platform and legs free from debris and paint build up Do not allow tools and materials to accumulate on platform 2 Keep all pivoting connections free from foreign substances 3 Do not abuse by dropping or impacting 4 Secure from movement to avoid damage while transporting 1 DANGER Metal Conducts Electricity Never use near electrical current
Download Pdf Manuals
Related Search