Wagner 0530001 Use and Care Manual
Contents
1. IMPORTANT This unit is intended for use with water based latex materials only DO NOT use this unit with any flammable or oil based materials Latex paints can be cleaned with soapy lukewarm water DO NOT use hot water when cleaning or flushing the unit Filling the Paint Tube 1 Remove the trigger housing a from the paint tube b by turning it 1 4 turn figure 1 2 Attach the fill adapter c to the paint tube Once the threads engage it will be secured after approximately 1 4 turn figure 2 3 Dip the end of the fill adapter into the material you plan to roll It is unnecessary to dip the fill adapter any further than the fill line d as shown figure 2 4 With the end of the fill adapter in the paint pull back on the handle e to fill the paint tube figure 3 5 Carefully remove the fill adapter by Figure 2 turning it 1 4 turn Once it is removed hook it to the side of the paint container Figure 1 IMPORTANT When removing any items from the fill adapter some paint may drip Make sure your floors and furnishings are protected by drop cloths 6 Attach the trigger housing back onto the paint tube Once the threads engage it will be secured after approximately 1 4 turn Rolling 1 To deliver paint to the roller pump the Figure 3 trigger several times until you see paint coming through the roller cover 2 You are now ready to begin rolling Pump the trigger as needed to bring paint to2. re 4 IMPORTANT All parts of the unit must be dry prior to Lubrication and storage Wagner Spray Tech All Rights Reserved Optional Cleanup Optional Cleanup Le A Carefully remove the trigger housing Figure 7 and thread the fill adapter to the paint tube figure 7 Dip the end of the fill adapter into a container of warm soapy water Pull the handle and draw water into the paint tube Make sure the paint tube is at least approximately a quarter full Carefully remove the fill adapter and reattach the trigger housing and its components Pull the roller cover off of the roller arm and set aside With the roller arm assembly a pointed into a waste container repeatedly pump Figure 8 the trigger to flush the water through the trigger housing and roller arm figure 8 Refill and repeat a minimum of 2 3 times Unthread the roller arm nut b from the trigger housing c and remove the roller arm figure 9 Remove the trigger housing from the paint tube Clean the trigger housing roller arm assembly and roller cover by hand using warm soapy water Note Be sure to remove all remaining paint residue from the connecting areas of each component specifically the inside of the trigger housing and the roller arm nut and the area where the roller arm nut connects to the trigger housing Figure 9 Wagner Spray Tech All Rights Reserved
3. the roller 3 Refill the paint tube as needed by repeating the steps above Note The roller arm assembly can hang from the side of the paint container when refilling figure 3 N Wagner Spray Tech All Rights Reserved Note You will need a garden hose or a faucet hose to complete these Cleanup steps If you do not have a garden hose available follow the Optional Cleanup instructions on the next page Cleanup 1 Remove the trigger housing a from the paint tube b by turning it 1 4 turn figure 4 2 Thread the cleaning adapter c into the rear of the trigger housing d figure 5 3 Thread the cleaning adapter with trigger housing attached onto a garden hose or a faucet hose figure 6 If you have a threaded faucet you can thread the hose adapter with trigger housing attached directly onto it 4 Slowly turn on the water source Allow the water to flush through the trigger housing for several minutes while occasionally pumping the trigger While flushing gently squeeze and rotate the Figure 5 roller cover by hand in order to help clean it 5 To clean the paint tube attach the fill adapter to the paint tube 6 Dip the end of the fill adapter into some warm soapy water Fill the paint tube with the water by pulling on the handle 7 With the fill adapter pointing into a waste container push the handle to flush the paint tube and fill adapter Repeat steps 6 and 7 as needed Figu
Download Pdf Manuals
Related Search