none IF-A36-000 Installation Guide
Contents
1. without a spacer secure the Invisi Fast to the inside perimeter board rimboard using the lower hole Then once all perimeter fasteners are secure fasten your final deck board using the upper deck board holes Requires approximately 1 75 pieces per sq foot of deck when joists are 16 on center Please be sure to check with your composite deck manufacturer for proper deck board spacing when using the Invisi Fast Hidden Deck Fastening System Use necessary safety precautions when installing invisi Fast Hidden Deck Fasteners Patent Pending PRODUCTS www invisifast com 1 866 766 9427 The folowing warranty is made in lieu of ail other warranties expressed or implied Any goods proven to be defective due to materiais will be repfaced or purchase price refunded Under no circumstances shall the manutacturer be responsitie for damages in excess of the purchase price User Shat determine the suitability of the product for its intended use and assumes ail risks of its use cr handling There are mo warranties on screws of tools sold or recommended Please contact M M Products for shipgeng information MM Products inc is Rot responsible for damages caused by excessive stwinking or expanding of treated lumber due to moisture For more information visit www invisifast com or call 1 866 766 94272. INVISI FAST HIDDEN DECK FASTENER WAEREA emo TYPICAL INSTALLATION Step 1 Starting from the outside attach the Invisi Fast with no spacer between each joist Install first board with proper overhang and secure using the top holes Deck Board Holes of the Invisi Fast fastener For a more sound deck and to prevent squeaks we recommend applying a 3 8 bead of Silicone or Construction Adhesive along joist before installing Invisi Fast hidden deck fastener to help fill in voids and imperfections on the mating surfaces between the joist and deck boards Not applying adhesive will not compromise stability Step 2 Using the Invisi Fast with spacer slide the convenient Overhang Tabs under your first deck board for hands free attachment Then using an approved deck screw fasten the Invisi Fast to the joist using a lower hole We recommend one screw to be fastened into the joist The other 2 holes are to be used as backups if wood imperfection is present Step 3 Secure the deck board by using the corresponding upper hole Slide your second board into place Secure deck board by using the remaining upper hole Continue this process for the length of the joist Note When 2 boards meet each other on a joist install an Invisi Fast on each side of the joist Step 4 Repeat this process until the last deck board Note Prior to securing the final board cut your board to size if necessary Using the Invisi Fast
Download Pdf Manuals
Related Search