Builders Edge 080140055028 Installation Guide
Contents
1. will be used for shutters with more boards 1 4 holes r 1 4 holes Four Screw Application Six Screw For less than 55 pees pplication For 55 or greater2. Board N Batten Shutter Installation Instructions For use on any surface including wood aluminum vinyl stucco hardboard brick or masonry Required for Installation e Electric drill 1 4 drill bit 1 8 drill bit screwdriver screws Note To prevent shutters from warping proper installation must be followed If installing shutters on any type of masonry wall anchors will be needed Step 1 O Place the shutter next to the window and mark the desired location against the wall or window See figure at right Step 2 For sizes below 55 use four screws per shutter For larger sizes 55 and over use six screws per shutter See figures below for proper screw placement and hole size The 1 8 holes may be drilled into the wall surface and used as pilot holes The 1 4 holes are drilled only in the shutter Note If installing on masonry transfer the holes in the shutter onto the wall Using a masonry drill bit drill the holes into the wall Install the wall anchors according to the instructions supplied with them and install shutters 1 4 holes Step 3 Use the enclosed screws to securely attach the shutter to the wall surface Do not over tighten the screws The shutters need freedom to expand and contract with changing weather 1 4 holes conditions 1 8 holes r Note The above instructions use the 3 board shutter as an example The same techniques
Download Pdf Manuals
Related Search