Zanussi ZWH 6105 User's Manual
Contents
1.2. 4 5 and 6 Depending on the programme different options can be combined These must be selected after choosing the de sired programme and before starting the programme When these buttons are pressed the corresponding pilot lights illuminate When they are pressed again the pilot lights go out If an incorrect option is selected the inte grated red pilot light of the button 7 flashes 3 times and the message Err is displayed For the compatibility among the washing programmes and the options see chapter Washing programmes Start the programme by pressing button 7 To start the selected programme press this button the corresponding green pilot light stops blinking The pilot light 9 illuminates to indicate that the appliance starts operating and the door is locked If you have chosen a delayed start the machine will begin the countdown Important If an incorrect option is selected the message Lir is displayed for a few seconds and the red pilot light of this button blinks 3 times Select the Delay Start by pressing button 8 Before you start the programme if you wish to delay the start press this button to select the desired delay The selected delay time value will appear on the display for a few seconds then the duration of the programme will appear again You must select this option after you have set the pro gramme and before you start the programme You can cancel or modify the delay time at any moment
3. User manual 2 S R Washing machine Uj MANUAL ZANUSSI ZWH 6105 Get Living Contents Safety information Product description Control panel Washing Programmes Helpful hints and tips First use Personalisation C5 Safety information Important Read carefully amp keep for future reference The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances However as manufacturers we feel it is our duty to provide the following safety notes e t is most important that this instruction book should be retained with the appliance for future reference Should the appliance be sold or transferred to another owner or should you move house and leave the ap pliance always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings You MUST read them carefully before installing or us ing the appliance e Before first starting up check the appliance for any damage incurred during transport Never connect up a damaged appliance If parts are damaged contact your supplier e Ifthe appliance is delivered in the winter months when there are minus temperatures Store it at room tem perature for 24 hours before using for the first time General safety t is dangerous to alter the specifications or attempt to
4. pressing any button the appliance will come out from the energy saving status and you can set another programme or switch the appliance off Remove the drawer by To aid cleaning the top pressing the catch down of the additive com wards and by pulling partment should be re out Flush itoutundera moved tap to remove any traces of accumulated powder 13 Cleaning the drawer recess Having removed the draw er use a small brush to clean the recess ensuring that all washing powder residue is removed from the upper and lower part of the recess Replace the drawer and run the rinse programme with out any clothes in the drum Cleaning the pump The pump should be inspected if the machine does not empty and or spin the machine makes an unusual noise during draining due to objects such as safety pins coins etc blocking the pump Proceed as follows e disconnect the appliance if necessary wait until the water has cooled down Open the pump door Place a container close to the pump to collect any spillage Pull out the emergency emptying hose place it in the container and remove its cap When no more water comes out unscrew the pump cover and remove it Always keep a rag nearby to dry up spillage of water when removing the cover Remove any objects from the pump impeller by ro tating it Put the cap back on the emergency emptying hose and place
5. before you press button 7 12 Selecting the delay start 1 Selectthe programme and the required options 2 Selectthe delay start by pressing button 8 3 Press button 7 the machine starts its hourly countdown the programme will start after the selected delay has expired Cancelling the Delay Start after having started the pro gramme 1 Setthe washing machine to PAUSE by pressing but ton 7 2 Press button 8 once On the display will appear Q 3 Press button 7 again to start the programme Important The selected delay can be changed only after selecting the washing programme again The door will be locked throughout the delay time If you need to open the door you must first set the wash ing machine to PAUSE by pressing button 7 and wait afew minutes before opening the door After you have closed the door press the same button again Important The Delay Start cannot be selected with DRAIN programme Altering an option or a running programme tis possible to change some options before the pro gramme carries them out Before you make any change you must pause the washing machine by pressing button 7 Changing a running programme is possible only by re setting it Turn the programme selector dial to and then to the new programme position Start the new pro gramme by pressing button 7 again The washing water in the tub will be not emptied out Interrupting a prog
6. correctly by loosening the ring nut After positioning the inlet hose be sure to tighten the ring nut again to prevent leaks Caution The inlet hose must not be lengthened If 15 too short and you do not wish to move the tap you will have to purchase a new longer hose specially designed for this type of use Water drainage The end of the drain hose can be positioned in three ways Hooked over the edge of a sink using the plastic hose guide supplied with the machine nthis case make sure the end cannot come unhooked when the machine is emptying This could be done by tying it to the tap with a piece of string or attaching it to the wall Ox Ina sink drain pipe branch This branch must be above the trap so that the bend is at least 60 cm above the ground Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm The end of the drain hose must always be ventilated i e the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose The drain hose must not be kinked Environmental concerns The symbol onthe product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this
7. product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Packaging materials The materials marked with the symbol CS are recyclable gt PE lt polyethylene gt PS lt polystyrene gt PP lt polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers Ecological hints To save water energy and to help protect the environment we recommend that you follow these tips Normally soiled laundry may be washed without pre washing in order to save detergent water and time the environment is protected too The machine works more economically if it is fully loaded e With adequate pre treatment stains and limited soiling can be removed the laundry can then be washed at a lower temperature Measure out detergent according to the water hard ness the degree of soiling and the quantity of laundry being washed 21 22 23 00 01096261 WWW Zanussi com
8. the end of the emergency emptying hose and that of the inlet hose in a bow placed on the floor and let water drain out What to do if Certain problems are due to lack of simple maintenance or oversights which can be solved easily without calling out an engineer Before contacting your local Service Centre please carry out the checks listed below During machine operation it is possible that the red pilot light of button 7 blinks one of the following alarm codes appears on the display and some acoustic signals sound every 20 seconds to indicate that the machine is not working e Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again e When you intend to start the machine up again make sure that the room temperature is above 0 C Emergency emptying out If the water is not discharged proceed as follows to empty out the machine pull out the plug from the power socket close the water tap e if necessary wait until the water has cooled down open the pump door e place a bowl on the floor and place the end of the emergency emptying hose into the bowl Remove its cap The water should drain by gravity into the bowl When the bowl is full put the cap back on the hose Empty the bowl Repeat the procedure until water stops flowing out e clean the pump if necessary as previously described e replace the emergency emptying hose in its seat after having pl
9. the water by Draining only turn the programme selector dial to the draining programme press then the button 7 e Draining and spinning turn the programme selector dial to the spinning programme reduce the spin speed by pressing the relevant button and then press button 7 Important This programme cannot be used for very delicate fabrics as silk or wool Pour the detergent for the soak pro gramme into the appropriate compartment At the end of the soak after having emptied out the water you can select the washing programme first turn the programme selector dial to O then to the programme and press the button 7 Programme Maximum and Minimum Temperature Cycle Description Options Detergent Compart Maximum Spin Speed Maximum Fabrics Load Type of ment Laundry RINSES SPIN REDUCTION amp Rinses RINSE HOLD Maximum spin speed at 1000 rpm EASY IRON Max load 7 kg EXTRA RINSE With this programme it is possible to rinse and spin cotton garments which have been washed by hand The machine per forms 3 rinses followed by a final long spin The spin speed can be reduced DRAIN Draining of water Max load 7 kg For emptying out the water of the last rinse in programmes with the option selected which ends with water left in the tub SPIN SPIN REDUCTION Drain and long spin Maximum spin speed at 1000 Max load 7 kg Separate spin for hand washed garments and after programmes wi
10. the working surface or the base are damaged so that the inside of the washing machine is accessible To activate this device ro tate the button without pressing it inside the door clockwise until the groove is horizontal If necessary use a coin To disable this device and restore the possibility of closing the door rotate the button anti clockwise un til the groove is vertical Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer LL Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase if available The prewash and soak deter gent is added at the beginning of the wash programme The stain remover is added during the stain action phase UY Compartment for powder or liquid detergent used for main wash If using liquid detergent pour it just before starting the programme 68 Compartment for liquid additives fabric softener starch Follow the product manufacturer s recommendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer Any fabric softener or starching additives must be poured into the compartment before starting the wash programme Control panel 1 Below is a picture of the contro panel It shows the programme selector dial as
11. well as the buttons pilot lights and the display These are presented by relevant numbers on the following pages Programme selector dial SPIN reduction button OPTION button PREWASH button EASY IRON button Symbols on the Control Panel Programme selector dial e Cotton 3c Cold Synthetics RR Delicates Special Handwash Push buttons and pilot lights Spin reduction button CJ Rinse hold Options button Economy SuperQuick UJ Prewash EXTRA RINSE button START PAUSE button DELAY START button DOOR LOCKED pilot light Display Wool Jeans Soak Rinses Drain Spin Easy Iron Extra Rinse Ei Child lock Start Pause Door locked light Delay start Programme selector dial spin speed button and available options Programme Selector Dial Itallows you to switch the appliance on off and orto select a programme Spin Reduction By pressing this button you can change the spin speed of the selected programme Available options Rinse hold By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing Before opening the door it will be necessary to empty out the water To empty out the water please read the paragraph At the end of the programme Economy Only for cottons and synthetic items lightly or normally s
12. CT the appliance from the electricity supply before you can carry out any cleaning or maintenance work Descaling The water we use normally contains lime It is a good idea to periodically use a water softening powder in the ma chine Do this separately from any laundry washing and according to the softening powder manufacturer s in structions This will help to prevent the formation of lime deposits External cleaning Clean the exterior cabinet of the appliance with soap and water only and then dry thoroughly Cleaning the drawer recess The washing powder and additive dispenser drawer should be cleaned regularly 1 Turn the programme selector dial to C 2 Selectthe draining or spinning programme 3 Reduce the spin speed if needed by pressing the relevant button 4 Press button 7 Atthe end of the programme the door is released and can be opened Turn the programme selector dial to C to switch the machine off Remove the laundry from the drum and carefully check that the drum is empty If you do not intend to carry out another wash close the water tap Leave the door open to prevent the formation of mildew and unpleasant smells Stand By If your laundry is not removed within 10 mi nutes after the programme is finished the back light of the display switches off and the energy saving system will be enabled Only the pilot light of the button 7 is blinking to indicate that the appliance has to be switched off By
13. TRA RINSE SPIN REDUCTION RINSE HOLD SUPER QUICK PREWASH EXTRA RINSE ESE SPIN REDUCTION RINSE HOLD e Special programme for delicate fabrics with hand washing care symbol Programme Maximum and Minimum Temperature Cycle Description Options Detergent Compart Maximum Spin Speed Maximum Fabrics Load Type of ment Laundry WOOL SPIN REDUCTION 40 RINSE HOLD amp Main wash Rinses Maximum spin speed at 1000 rpm Max load 2 kg Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics Note A single or bulky item may cause imbalance If the appliance doesn t perform the final spin phase add more items redistribute the load manually and then select the spinning programme JEANS SPIN REDUCTION 40 RINSE HOLD Main wash Rinses PREWASH4 Maximum spin speed at 1000 rom EASY IRON Max load 3 5 kg With this programme it is possible to wash items like pants shirts or jackets in denim and also jersey realized with hi tech materials The Extra Rinse option will be activated automati cally SOAK 11 Prewash Soak for about 40 minutes Stop with water the tub Max load 7 kg Special programme for heavily soiled laundry The machine performs a soak at 30 C At the end of this time the machine will stop automatically with water left in the tub Before starting a new washing phase is necessary to empty out
14. The pilot light 9 illuminates when the programme starts and indicates if the door can be opened e light on the door cannot be opened The machine is working or has stopped with water left in the tub e light off the door can be opened The programme is finished or the water has been emptied out e light blinking the door is opening in a few minutes 10 Display The display shows the following information 10 1 Child safety lock This device permits you to leave the appliance unattended during it s functioning 10 2 e Duration of the selected programme After selecting a programme the duration is displayed n hours and minutes for example Z 5 The du ration is calculated automatically on the basis of the maximum recommended load for each type of fabric After the programme has started the time remaining is updated every minute Selected drying time After selecting a drying programme the drying time is shown in minutes or hours and minutes After the pro gramme has started the time remaining is updated every minute Delayed start The Selected delay set by pressing the relevant button appears on the display for a few seconds then the du ration of the selected programme is displayed again The delay time value decreases by one unit every hour and then when 1 hour remains every minute Alarm codes In the event of operating problems some alarm codes can be displayed for example EZ see
15. ase the detergent quantity or use another one Stubborn stains have not been treated prior to washing e Use commercial products to treat the stubborn stains The correct temperature was not selected Check if you have selected the correct temperature Excessive laundry load e Reduce the laundry load The programme is still running e Wait the end of washing cycle The door lock has not been released e Wait until the pilot light 9 goes off There is water in the drum e Select drain or spin programme to empty out the water There is water on the floor Unsatisfactory washing results The door will not open The transit bolts and packing have not been removed Check the correct installation of the appliance The support feet have not been adjusted e Check the correct levelling of the appliance The laundry is not evenly distributed in the drum Redistribute the laundry Maybe there is very little laundry in the drum Load more laundry The machine vibrates is noisy 17 Possible cause Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum The laundry is redistributed by reverse rotation of the drum This may happen several times before the unbalance disappears and normal spinning can resume If after 10 minutes the laundry Spinning starts late or the machine S Still not evenly distributed in the drum the machine will not s
16. he inlet hose connection The machine does not fill The filter in the inlet hose or the inlet valve filter are blocked E77 e Clean the water inlet filters See Cleaning the water inlet filters for more details The door is not properly closed EG Close the door firmly The drain hose is squashed or kinked Check the drain hose connection The drain filter is clogged EEL Clean the drain filter An option or a programme that ends with the water still in the tub or a that eliminates all the spinning phases has been selected e Select the draining or spinning programme The laundry is not evenly distributed in the drum e Redistribute the laundry The machine does not empty and or does not spin Possible cause Solution Too much detergent or unsuitable detergent creates too much foam has been used Reduce the detergent quantity or use another one Check whether there are any leaks from one of the inlet hose fittings It is not always easy to see this as the water runs down the hose check to see if it is damp Check the water inlet hose connection The drain or inlet hose is damaged Replace it with a new one The cap on the emergency emptying hose has not been replaced or the filter has not been properly screwed in after cleaning action Refit the cap on the emergency emptying hose or screw the filter fully in Too little detergent or unsuitable detergent has been used ncre
17. ith acetic or citric acid then rinse Treat any residual marks with bleach Ink depending on the type of ink moisten the fabric first with acetone then with acetic acid treat any residual marks on white fabrics with bleach and then rinse thor oughly Tar stains first treat with stain remover methylated spirits or benzine then rub with detergent paste Detergents and additives Good washing results also depend on the choice of de tergent and use of the correct quantities to avoid waste and protect the environment Although biodegradable detergents contain substances which in large quantities can upset the delicate balance of nature First use 1 Ensure that the electrical and water connections comply with the installation instructions 1 do not use acetone on artificial silk 10 The choice of detergent will depend on the type of fabric delicates woollens cottons etc the colour washing temperature and degree of soiling All commonly available washing machine detergents may be used in this appliance powder detergents for all types of fabric powder detergents for delicate fabrics 60 C max and woollens liquid detergents preferably for low temperature wash programmes 60 C max for all types of fabric or spe cial for woollens only The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme If
18. modify this product in any way During high temperature wash programmes the door glass may get hot Do not touch it Make sure that small pets do not climb into the drum Toavoid this please check into the drum before using Any objects such as coins safety pins nails screws stones or any other hard sharp material can cause extensive damage and must not be placed into the ma chine Daily use 11 Care and cleaning 13 What to do if 15 Technical data 18 Consumption values 19 Installation 19 Environmental concerns 21 Subject to change without notice Only use the advised quantities of fabric softener and detergent Damage to the fabric can ensue if you over fill Refer to the manufacturer s recommendations of quantities e Wash small items such as socks laces washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum e Donotuse your washing machine to wash articles with whalebones material without hems or torn material Always unplug the appliance and turn off the water supply after use cleaning and maintenance Under no circumstances should you attempt to repair the machine yourself Repairs carried out by inexper ienced people may cause injury or serious malfunc tioning Contact your local Service Centre Always in sist on genuine spare parts Installation e This appliance is heavy Care
19. n of the pro grammes please refer to Cottons 40 0 77 60 the display on the control Synthetics 40 06 54 panel Delicates 40 0 6 63 Wool Handwash 30 0 25 55 1 Cottons Economy at 60 C with a load of 7 kg is the reference programme for the data entered in the energy label in compliance with EEC 92 75 standards i The consumption data shown on this chart is to be considered purely indicative as it may vary depending on the quantity and type of laundry on the inlet water temperature and on the ambient temperature Installation Unpacking All transit bolts and packing must be removed before us ing the appliance You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again EO V nscrew the three bolts Slide outthe relevant plas lic spacers A After removing all the packaging carefully lay machine on it s back to re move the polystyrene base from the bottom Remove the power supply cable and the hoses from he hose holders on the rear of the appliance m Open the porthole and re move the polystyrene block fitted on the door seal Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet 19 P
20. oiled at a temperature of 40 C or higher The washing time will be prolonged and the washing temperature will be reduced You can use this option if you want to wash normally soiled laundry and at the same time save energy Super Quick Short cycle for lightly soiled items or for laundry which needs only freshening up We recommend you to reduce the fabrics loading Prewash By selecting this option the machine performs a prewash cycle before the main wash phase The washing time will be prolonged This option is recommended for heavily soiled laundry Easy Iron By selecting this option the laundry is gently washed and spun to avoid any creasing In this way ironing is easier Furthermore the machine will perform some additional rinses in some programmes On cotton programmes the maximum spin speed is reduced automatically Extra Rinse This appliance is designed for saving energy If it neces sary to rinse the laundry using an extra quantity of water extra rinse select this option Some additional rinses will be performed This option is recommended for people who are allergic to detergents and in areas where the water is very soft 6 Start Pause This button allows you to start or to interrupt the selected programme Delay Start The programme can be delayed from 30 min 60 min 90 min 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button Door locked pilot light
21. or their safety The packaging components e g plastic film poly styrene can be dangerous to children danger of suf f petent person Use e This appliance is designed for domestic use It must not be used for purposes other than those for which it was designed e Only wash fabrics which are designed to be machine washed Follow the instructions on each garment label Do not overload the appliance See the Washing Pro gramme Table Before washing ensure that all pockets are empty and buttons and zips are fastened Avoid washing frayed or torn articles and treat stains such as paint ink rust and grass before washing Underwired bras must NOT be machine washed Keep all deterge Teach ocation Keep them out of children s reach nts in a safe place out of children s Make sure that children or pets do not climb into the drum To preven eature t children and pets becoming trapped inside the drum this machine incorporates a special Garments which have been in contact with vo atile pe troleum products should not be machine washed If volatile cleaning fluids are used care should be taken to ensure that the fluid is removed from the garment before placing in the machine Never pull the power supply cable to remove the plug from the socket always take hold of the plug itself Never use the appliance if the power supply cable the control panel
22. ositioning Install the machine on a flat hard floor Make sure that air circulation around the machine is not impeded by carpets rugs etc Check that the machine does not touch the wall or other kitchen units Level the washing machine by raising or lowering the feet The feet may be tight to adjust as they incorporate a self locking nut but the machine MUST be level and stable Any necessary adjustment can be made with a spanner Accurate levelling prevents vibration noise and displace ment of the machine during operation Never place card board wood or similar materials under the machine to compensate for any unevenness in the floor If necessary check the setting with a spirit level Water inlet A Warning This appliance must be connected to a cold water supply A Caution Before connecting up the appliance to new pipework or to pipework that has not been used for some time run off a reasonable amount of water to flush out any debris that may have collected A Caution Do not use the hose from your previous appliance to connect to water supply Connect the hose to a tap with a 3 4 thread Always use the hose supplied with lt the appliance The other end of the inlet hose which connects to the appliance can be turned as showed in the picture Do not place the inlet hose downwards Angle the hose to the left or right depending on the position of your water tap Set the hose
23. paragraph What to do if Washing Programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry COTTONS 90 Cold Main wash Rinses Maximum spin speed at 1000 rpm Max load 7 kg Reduced load 3 5 kg 2 White and coloured cotton normally soiled items SYNTHETICS 60 Cold Main wash Rinses Maximum spin speed at 800 rpm Max load 3 5 kg Reduced load 1 5 kg 2 Synthetic or mixed fabrics underwear coloured garments non shrink shirts blouses DELICATES 40 Cold Main wash Rinses Maximum spin speed at 600 rpm Max load kg 3 5 Reduced load kg 1 52 Delicate fabrics acrylics viscose polyester HANDWASH 30 Cold Main wash Rinses Maximum spin speed at 1000 rom Max load 2 kg Incorrect option selection If an option which is not compatible with the set wash programme is selected the message Err is displayed at the bottom of the display for a few seconds and the integrated red light of button 7 start flashing End of programme When the programme has finished the flashing zero 7 5 displayed the pilot light 9 and the pilot light of button 7 go out and the door can be opened Detergent Compart Options SPIN REDUCTION RINSE HOLD ECONOMY SUPER QUICK PREWASH4 EASY IRON EXTRA RINSE SPIN REDUCTION RINSE HOLD ECONOMY SUPER QUICK EASY IRON EX
24. pin In this does not spin case redistribute the load manually and select the spin programme e Redistribute the laundry The load is too small e Add more items redistribute the load manually and then select the spinning programme The machine is fitted with a type of motor which makes an unusual noise The machine makes an unusual compared with other traditional motors This new motor ensures a softer start noise and more even distribution of the laundry in the drum when spinning as well as increased stability of the machine cuia Dased on modern technology operate very economically using very ittle water without affecting performance If you are unable to identify or solve the problem contact our service centre Before telephoning make a note of the model serial number and purchase date of your machine the Service Centre will require this information Technical data Dimensions Width 60 cm Height 85 cm Depth 63 cm Electrical connection Information on the electrical connection is given on the rating plate on the Voltage Overall power Fuse inner edge of the appliance door Water supply pressure inimum 0 05 MPa aximum 0 8 MPa Maximum Load Cotton 7kg Spin Speed aximum 1000 rpm Consumption values Programme Energy consumption Water consumption litres KWh 21 65 Programme duration Mi nutes White Cottons 90 Cottons 60 14 60 SURE ECONOMY 60 1 19 59 For the duratio
25. ramme Press the button 7 to interrupt a programme which is running the corresponding pilot light starts blinking Press the button again to restart the programme Cancelling a programme Turn the selector dial to to cancel a programme which is running Now you can select a new programme Opening the door after the programme has started First set the machine to pause by pressing the button 7 If the pilot light 9 blinks and after a few minutes goes off the door can be opened If the pilot light 9 remains lit this means that the machine is already heating or that the water level is too high In any case do not try to force the door If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to O After a few minutes the door can be opened Pay attention to the water level and temperature After closing the door it is necessary to select the pro gramme and options again and to press button 7 At the end of the programme The machine stops automatically The blinking appears on the display the pilot light of button 7 and the pilot light 9 go off If a programme or an option that ends with water left in the tub has been selected the pilot light 9 remains on and the door is locked to indicate that the water must be emp tied out before opening the door Follow the below instructions to empty out the water Care and cleaning AN Warning You must DISCONNE
26. should be taken when moving it e When unpacking the appliance check that it is not damaged If in doubt do not use it and contact the Service Centre All packing and transit bolts must be removed before use Serious damage can occur to the product and to property if this is not adhered to See relevant section in the user manual e After having installed the appliance check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall e f the machine is situated on a carpeted floor please adjust the feet in order to allow air to circulate freely under the appliance Always be sure tha hoses and their connec e fthe appliance is insta m there is no water leakage from ons after the installation ed ina location subjectto frost please read the dangers of freezing chapter e Any plumbing work required to install this appliance should be carried out by a qualified plumber or com petent person Any electrical work required to install this appliance should be carried ou by a qualified electrician or com Child safety This appliance is not intended for use by person in cluding children with reduced physical sensory or mental capabilities or lack of experience and knowl edge unless they have been given supervision or in struction concerning use of the appliance by a person responsible f
27. th the option selected which ends with water left in the tub You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun 0 OFF For cancelling the programme which is running or to switch the machine off 1 This programme at the temperature of 60 with the option ECONOMY selected is the reference programme for the data entered in the energy label in compliance with EEC 92 75 standards It can be selected for slightly or normally soiled cotton items The temperature will decrease and the washing time will be extended This allows to obtain a good washing efficiency so saving energy 2 If you select the Super Quick option by pressing button 3 we recommend that you reduce the maximum load as indicated Full loading is possible however with somewhat reduced cleaning results 3 This option is not active at a temperature lower than 40 C 4 If using liquid detergents a programme without PREWASH must be selected Helpful hints and tips Sorting out the laundry New coloured items may run in the first wash they should Follow the wash code symbols on each garment label and therefore be washed separately the first time the manufacturer s washing instructions Sortthe laundry Button up pillowcases close zip fasteners hooks and as follows whites coloureds synthetics delicates wool Poppers Tie any belts or long tapes Remove persistent stains before washing lens Rub partic
28. the end of the cycle if there is a fault By pressing the 4 and 5 buttons simultaneously for about 6 seconds the acoustic signal is deactivated except if there is a fault By pressing these 2 buttons again the acoustic signal is reactivated Child safety lock This device permits you to leave the appliance unattended and not to worry that children might be injured by or cause Daily use Load the laundry Open the door by carefully pulling the door handle outwards Place the laun dry in the drum one item at atime shaking them out as much as possible Close the door ECO valve Then run a cotton cycle at the highest tem perature without any laundry in the machine to remove any manufacturing residue from the drum and tub Pour 1 2 a measure of detergent into the main wash compartment and start the machine damage to the appliance This function remains enabled also when the washing machine is not working There are two different ways to set this option 1 Before pressing button 7 itwill be impossible to start the machine 2 After pressing button 7 it will be impossible to change any other programme or option To enable or disable this option press simultaneously for about 6 seconds buttons 2 and 3 until on the display the icon appears or disappears Pull out the dispenser drawer until it stops Measure out the amount of detergent required pour it into the main wash compar
29. the latter back in its seat Screw the pump cover fully in Close the pump door N Caution When the appliance is in use and depending on the programme selected there can be hot water in the pump Never remove the pump cover during a wash cycle always wait until the appliance has finished the cycle and is empty When replacing the cover ensure it is securely re tightened so as to stop leaks and young children being able to remove it Cleaning the water inlet filters Important If the appliance doesn t fill takes long to fill water the starting button blinks yellow or the display if available shows the relevant alarm see chapter What to do if for more details check if the water inlet filters are blocked To clean the water inlet filters Turn off the water tap e Unscrew the hose from the tap Clean the filter in the hose with a stiff brush Screw the hose back onto the tap Make sure the connection is tight e Unscrew the hose from the machine Keep a rug nearby because some water may flow Clean the filter in the valve with a stiff brush or with the piece of cloth e Screw the hose back to the machine and make sure the connection is tight e Turn on the water tap Frost precaution If the machine is exposed to temperatures below 0 C certain precautions should be taken Turn off the water tap Unscrew the inlet hose e Place
30. tment Lll or in the appropriate com partment if the selected programme option it requires see more details in Detergent dispenser drawer If required pour fabric softener into the compartment marked the amount used must not exceed MAX mark in the drawer Close the drawer gently Select the required programme by means of the programme selector dial 1 Turn the programme selector dial to the required pro gramme The green pilot light of button 7 starts to flash The selector dial can be turned either clockwise or anticlockwise Turn the selector dial to position O to reset the pro gramme to switch the machine OFF At the end of the programme the selector dial must be turned to position C to switch the machine off 11 Important If you turn the programme selector dial to another programme when the machine is working the red pilot light of button 7 will blink 3 times and the message Err is displayed to indicate a wrong selection The machine will not perform the new selected programme Select the spin speed by pressing button 2 When selecting a programme the appliance proposes automatically the maximum spin speed provided for that programme See Washing programmes for the maxi mum allowed spin speed Press this button repeatedly to change the spin speed if you want your laundry to be spun at a different speed The relevant pilot light illuminates Select the available options by means of buttons 3
31. ugged it screw the pump cover again and close the door Important Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme This will activate the ECO Valve device avoiding that part of the detergent remains unused at next washing ELI problem with the water supply e problem with the water draining e door open Once the problem has been eliminated press the button Tto restart the programme If after all checks the problem persists contact your local Service Centre 15 Possible cause Solution The door has not been closed EY 7 Close the door firmly The plug is not properly inserted in the power socket Insert the plug into the power socket There is no power at the socket Please check your domestic electrical installation The main fuse has blown The machine does not start e Replace the fuse The selector dial is not correctly positioned and the button 7 has not been pressed e Please turn the selector dial and press the button 7 again The delay start has been selected e the laundry are to be washed immediately cancel the delay start The Child Safety Lock has been activated Deactivate the Child Safety Lock The water tap is closed E 17 Open the water tap The inlet hose is squashed or kinked E 7 7 Check t
32. ularly soiled areas with a special detergent or Before loading the laundry detergent paste Never wash whites and coloureds together Whites may Treatcurtains with special care Remove hooks ortie them lose their whiteness in the wash up in a bag or net Removing stains Stubborn stains may not be removed by just water and detergent It is therefore advisable to treat them prior to washing Blood treat fresh stains with cold water For dried stains soak overnight in water with a special detergent then rub in the soap and water Oil based paint moisten with benzine stain remover lay the garment on a soft cloth and dab the stain treat several times Dried grease stains moisten with turpentine lay the gar ment ona soft surface and dab the stain with the fingertips and a cotton cloth Rust oxalic acid dissolved in hot water or a rust removing product used cold Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole Mould stains treat with bleach rinse well whites and fast coloureds only Grass soap lightly and treat with bleach whites and fast coloureds only Ball point pen and glue moisten with acetone lay the garment on a soft cloth and dab the stain Lipstick moisten with acetone as above then treat stains with methylated spirits Treat any residual marks with bleach Red wine soak in water and detergent rinse and treat w
33. using liquid detergents a programme without prewash must be selected Your appliance incorporates a recirculation system which allows an optimal use of the concentrated detergent Follow the product manufacturer s recommendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric load size degree of soiling and hardness of the water used Follow the product manufacturers instructions on quan tities to use Use less detergent if you are washing a small load e the laundry is lightly soiled large amounts of foam form during washing Degrees of water hardness Water hardness is classified in so called degrees of hardness Information on hardness of the water in your area can be obtained from the relevant water supply com pany or from your local authority If the water hardness degree is medium or high we suggest you to add a water softener following always the manufacturer s instructions When the degree of hardness is soft readjust the quantity of the detergent Remove the polystyrene block and any material from the drum e Pour 2 liters of water into the main wash compartment L J of the detergent drawer in order to activate the Personalisation Acoustic signals The machine is provided with an acoustic device which sounds in the following cases at
Download Pdf Manuals
Related Search