Zanussi ZT 6910 Instruction Booklet
Contents
1. Internal cleaning Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65 C wash without dishes using detergent Regular use of Finish Dishwasher Cleaner cleans inaccessible parts eliminates unpleasant food odours and helps prevent the build up of limescale Cleaning the central filter After each wash Scraps of food may accumulate in the drain filter A and should be removed by rinsing the filter under running water To remove the drain filter simply pull it out by the handle Once cleaned refit the filter by pushing it back to its original position until it engages Cleaning the large filter Every week If necessary clean the large filter B on both sides under running water using a brush To remove the large filter 1 Remove the spray arm by pulling it upwards on one side 2 Turn the column C anticlockwise by 90 and then slide out the filter 3 Once cleaned refit it following the above instructions in reverse order 4 Ensure the filter is in its original position the handle of the drain filter should be pointing towards the front of the appliance The dishwasher must not be used without filters Incorrect repositioning and fitting of the filters will produce poor washing results Cleaning the filters is vital to ensure correct operation of the mac2. To stop a countdown in progress open the door and press the CANCEL push button in the digital display appears the number corresponding to the selected programme The countdown has been cancelled but the setting of the programme with eventual options remains memorised At the end of the washing programme The dishwasher will automatically stop and an intermittent audible signal will sound when the programme has ended with the delay start the audible signal is automatically excluded All indicator lights turn off and 3 flashing horizontal lines will appear in the digital display Wait a 15 20 minutes before opening the dishwasher s door in this way you will avoid to burn yourself removing the dishes and avoid also the damage of the nearby furniture caused by the escape of steam Open the door and switch off the dishwasher by pressing the ON OFF push button Empty the lower basket first and then the upper one this will avoid water dripping from the upper basket onto the dishes in the lower one 16 Important In general it is not advisable to open the door while the machine is working if the door is opened however a safety device ensures that the machine stops Care must be taken if the door is opened during the hot phase or immediately after a programme has finished as steam may escape When the washing programme has finished it is recommended that the dishwasher is unplugged and the water tap turned off
3. 7 King Street Kirkwall Orkney KW15 1JF Scottish Hydro Electric Central Warehouse Inveralmond Perth PH1 3AF 3 4 Carlton Place Lerwick Shetland ZE1 OPW Bolts Shetland 26 North Road Lerwick Shetland ZE1 OPE Leask Electrical Harisdale Symbister Whalsay Shetland ZE2 9AA NORTHERN IRELAND BELFAST CARDIFF OSWESTRY Owenmore House Kilwee Business Park Dunmurry Belfast BT17 OHD WALES Unit 4 Guardian Industrial Estate Clydesmuir Road Cardiff CF2 2QS Unit 6 7 Coed Parc Abergele Road Rhuddlan Clwyd LL18 5UG Unit 9 St Clears Business Park Tenby Road St Clears Carmarthen SA33 4JW Plas Ffynnon Warehouse Middleton Road Oswestry SY11 2PP NORTH EAST GATESHEAD GRIMSBY HULL LEEDS NEWTON AYCLIFFE SHEFFIELD Unit 356a Dukesway Court Dukesway Gateshead NE110BH 15 Hainton Avenue Grimsby N E Lincs DN32 9AS Unit 1 Boulevard Industrial Estate Hull HU3 4AY 64 66 Cross Gates Road Cross Gates Leeds LS15 7YS Unit 23 Northfield Way Aycliffe Industrial Park Newton Aycliffe DL5 6EJ Pennine House Roman Ridge Road Sheffield S9 1GB NORTH WEST BIRKENHEAD CARLISLE ISLE OF MAN BOLTON PRESTON STOCKPORT 1 Kelvin Park Dock Road Birkenhead CH41 1LT Unit 7 James Street Workshops James Street Carlisle Cumbria CA2 5AH South Quay Ind Estate Douglas Isle of Man IM1 5AT Unit B Central Industrial Estate
4. ZANUSSI 152977 15 2 INSTRUCTION BOOK CuK For the user For the installer Important safety information 3 Installation instructions Spr Water supply connections Description gf the appliance j Water outlet hose connection The control panel 4 Electrical connection Before use 6 Setting the water softener 6 Rinse aid 8 Use of detergent 9 Using your appliance 10 Loading your appliance 10 Adjusting the height of the upper basket 12 Hints and tips 13 Washing programmes 14 Operating sequence 15 Maintenance and cleaning 17 Internal cleaning 17 Cleaning the filters 17 External cleaning 18 Prolonged periods of non operation 18 Frost precautions 18 Moving the machine 18 Something not working 19 Protection against flooding 20 Technical specifications 20 Hints for test centres 21 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions AN Safety instructions 1 2 3 Step by step G Hints and tips Y Environmental information 22 22 22 23 A It is most important that this instruction book should be retained with the appliance for future reference Should the appliance be sold or transferred to another owner or should you move house and leave the appliance always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information
5. Rinse aid is automatically added during the last rinse ensuring thorough rinsing and spot and streak free drying The dispenser which is positioned inside the door holds about 110 ml of rinse aid which is sufficient for 16 40 dishwashing programmes depending upon the dosage setting Filling with rinse aid 1 Open the container by turning the lid A anticlockwise 2 Add the rinse aid until the container is completely full The indicator B will be completely dark 3 Top up the rinse aid when the rinse aid indicator light on the control panel illuminates Ensure that the lid is closed after every refill Do not put liquid detergent in the rinse aid compartment Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash Adjusting the dose According to the finish and drying results obtained adjust the dose of rinse aid by means of the 6 position selector C position 1 minimum dosage position 6 maximum dosage Start from position 3 Gradually increase the dose if there are drops of water or lime spots on the dishes after washing Reduce it if there are sticky whitish streaks on the dishes BROL Use of detergent Only use detergents specifically designed for use in dishwashers We recommend the use of Finish detergents which are available in the following options Finish Double Action Tablets Each tablet has the ex
6. This information has been provided in the interest of your safety You MUST read it carefully before installing or using the appliance Installation This appliance is heavy Care should be taken when moving it Itis dangerous to alter the specifications or attempt to modify this product in any way Care must be taken to ensure that the appliance does not stand on the electrical supply cable Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person Child Safety e This appliance is designed to be operated by adults Children should not be allowed to tamper with the controls or play with the product e Keep all packaging well away from children e Keep all detergents in a safe place out of children s reach During Use Items that are contaminated by petrol paint steel or iron debris corrosive acidic or alkaline chemicals must not be washed in this dishwasher Under no circumstances should you open the door whilst the appliance is in operation Always turn off the appliance before opening the door Only use detergent specifically designed for use in dishwashers e Long bladed knives stored in an upright position are a potential hazard Long and or sharp items of cutlery such as carving knives must b
7. Central filter Lower spray arm Upper basket SID detergent dispenser Super Intensity Dispenser DI RINSE AID He n MEPROGRAMMES A UPPER W ECO DRY Bo at S a SELECTION WLOWER W NO DRY DELAY START CANCEL ON OFF SID E ON OFF push button 5 HALF LOAD push button By pressing this push button washing can be confined to a single basket The indicator light corresponding to the selected basket comes on If both indicator lights are off washing will be carried out in both baskets This option is useful and economical when only a few dishes need washing Remember to load all the dishes into the selected basket This option is not available with programmes 1 Rinse and Hold and 10 Plate warmer Indicator lights RINSE AID refilling indicator light Illuminates when the rinse aid has run out and requires refilling SALT refilling indicator light IIluminates when the salt has run out and the salt container requires refilling SID indicator light IIluminates when a programme with prewash is selected Digital display PROGRAMMES SELECTION push button 6 DRY selection push button By pressing this push button you can opt to shorten ECO DRY or completely eliminate NO DRY the heating phase during the last rinse so making a considerable energy saving The indicator light corresponding to the selection will come on This optio
8. St Marks Street Bolton BL3 6NR Unit 250 Dawson Place Bamber Bridge Preston Lancashire PR5 8AL Unit 20 Haigh Park Haigh Avenue Stockport SK4 1QR BIRMINGHAM BOURNE BRIDGNORTH GLOUCESTER HEREFORD HIGHAM FERRERS ILKESTON LEICESTER LINCOLN NEWCASTLE UNDER LYME REDDITCH TAMWORTH WORCESTER MIDLANDS 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB Pinfold Road Bourne PE10 9HT 68 St Mary s Street Bridgnorth Shropshire WV16 4DR 101 Rycroft Street Gloucester GL1 4NB Units 3 amp 4 Bank Buildings Cattle market Hereford HE4 9HX 30 High Street Higham Ferrers Northants NN10 8PL Unit 2 Furnace Road IIkeston DE7 5EP Unit 7 Oaks Industrial Estate Coventry Road Narborough Leicestershire LEQ 5GF Unit 8 Clifton Street Stone Field Park Lincoln LN5 8LQ 18 21 Croft Road Brampton Ind Estate Newcastle under Lyme Staffordshire ST5 OTW 13 Thornhill Road North Moons Moat Redditch Worcestershire B98 9ND Unit 3 Sterling Park Claymore Tamworth B77 5DQ Units 1 amp 2 Northbrooks Close Gregorys Mill Ind Estate Worcester WR3 8BP LONDON amp EAST ANGLIA BECKENHAM CHELMSFORD COLINDALE ELTHAM ENFIELD GRAVESEND IPSWICH LETCHWORTH LONDON MAIDENHEAD MOLESEY NEWBURY NORWICH SUNBURY 11a Gardner Ind Estate Kent House Lane Beckenham Kent BR3 1QZ Hanbury Road Widfor
9. This will prevent deposits of sand or rust clogging the inlet hose filter Water outlet hose connection The end of the drain hose can be connected in the following ways 1 To the sink outlet siphon securing it if necessary with a clip 2 To a stand pipe provided with vent hole minimum internal diameter 4 cm The waste connection must be at a height of between 30 cm minimum and 100 cm maximum from the bottom of the dishwasher The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine 22 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person Attention Our appliances are supplied with a security device to protect against the return of dirty water back into the machine If the spigot of your sink has a no return valve incorporated this can prevent the correct draining of your dishwasher We advise you therefore to remove it min 30 cm If you use a drain hose extension it must
10. does not fill Alarm AL5 e Ensure the water tap is open with water e Ensure the mains water supply has not been cut off e The inlet hose may be squashed or bent Reposition the hose The inlet hose may be blocked Switch off the water supply and clean the filter The dishwasher will not drain Alarm AL6 e The drain hose may be squashed or bent Reposition the hose The sink may be blocked Clear any blockages e The drain hose extension is not correct Follow the instructions for connecting to the waste e There is no vent in the end of the drain hose Protection against flooding Alarm AL4 e Close the water tap and contact the Service Force Centre is active General Alarms AL1 AL2 Switch off the dishwasher Switch it back on and start the programme AL3 AL7 AL8 If the alarm reappears call the local Service Force Centre The machine is noisy e Dishes are rattling against each other refer to Loading your machine e The spray arms are knocking against the dishes Refer to Loading your machine The door is difficult to close e The dishwasher is not level or not properly built in Visible lime deposits or Check that there is salt and that the salt cap is tight white film on the dishes Check that the right level of the water softener is set The dishes are not quite dry The rinse aid has run out or too little is being used The baskets are too full The dishes have not been arranged properly The spray arms do
11. inlet and discharge hoses 4 Pull the machine out together with the hoses Avoid over tilting the machine during transportation 18 Certain problems are due to lack of simple maintenance or oversights which can be solved easily without calling out an engineer The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems The dishwasher will not start or stops during operation an audible signal will inform you of the alarm intervention All push buttons are inoperative except for the ON OFF push button All indicator lights are off and in the digital display one of the following flashing fault codes will appear AL1 AL2 AL3 AL4 AL5 AL6 AL7 AL8 Press the ON OFF push button to switch off the dishwasher and carry out the following suggested corrective actions listed below Once the checks have been carried out switch on the dishwasher and start a washing programme if the fault code reappears in the digital display contact your local Service Force Centre Important If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee Symptom Fault code Solution The machine will not start e The door has not been properly closed The plug is not properly inserted in the power socket There is a power failure The machine
12. not rotate The spray arms are clogged The filters are clogged The filters are not in the correct position Not enough detergent has been used or it is unsuitable The detergent is old or has gone hard The salt container cap is not properly closed The washing programme selected is too gentle The dishes are not clean poor wash 19 If after all these checks the problem persists contact your local Service Force Centre quoting the model and serial number This information can be found on the rating plate located on the right hand side of the dishwasher door see picture Protection against flooding The machine is fitted with a device in the bottom of the machine to protect against flooding The device will operate if there are any water leaks in the machine however it will only operate if the machine is on In case of malfunction a fault code will appear in the digital display will show AL4 To repair the dishwasher turn off the water tap and call the Service Force Centre Technical specifications DIMENSIONS Width 59 6 cm Height with worktop 81 8 87 8 cm Max depth 55 5 cm Max depth with open door 111 4 cm ELECTRICAL CONNECTION Voltage 220 240 V 50 Hz MOTOR RATING DURING WASH 200 W POWER OF HEATING ELEMENT 2100 W OVERALL POWER 2300 W WATER SUPPLY PRESSURE Minimum 50 kPa 0 5 bar Maximum 800 kPa 8 bar CAPACITY 12 place settings 20
13. per 6 36 42 51 60 501 600 YES Million 7 43 49 61 70 601 700 YES peace cree be adjusted ae a 8 50 56 71 80 701 800 YES ardness of the water in your area Your local Water i i g Authority can advise you on the hardness of the 9 57 84 81 120 B01 1200 YES water in your area The dishwasher is factory set at level 4 If this level is not suitable for your area the softener should be adjusted If your water is level 0 it is already soft and therefore there is no need to use salt With the setting of the water softener at level 0 the salt indicator light on the E The adjustment of the water softener is control panel will always remain off possible only with the machine in setting Use salt from level 1 upwards mode To select a different level proceed as follows 1 Press HALF LOAD and DRY push buttons simultaneously for about 5 seconds In the display appears a L followed by a number E PROGRAMMES A UPPER ECO DRY which corresponds to the current level SELECTION Y LOWER _ No DRY Z 2 Press within 5 seconds the DRY push button e the NO DRY indicator light flashes as many times as necessary until the required level appears in the display The level increases by 1 each time the push button is pressed S0257 _ 3 5 seconds after this push button has last been pressed the dishwasher memorises the level selected and returns to the programme setting mode F
14. Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser Test standard EN 50242 Reference programme Programme 6 BIO 50 C WITH PREWASH Load 12 standard place settings Rinse aid selector position 5 Detergent dosage 30 g in the dispenser i ia OE halt a Fi fi a 3 wwii F ies i Fi N Arrangement upper basket Arrangement lower basket Arrangement knife basket 21 Remove all packaging before positioning the machine If possible position the machine next to a water tap and a drain Water supply connections This dishwasher must be plumbed into a cold water supply The water pressure must be within the limits given in the technical specifications Your local Water Authority will advise you on the average mains pressure in your area The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation Do not use for the connection old hoses which have been used in another appliance The locknut must be correctly fitted to avoid water leaks Avoid bends or kinks in the hose which could prevent or slow down the water supply If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few minutes before connecting the inlet hose
15. act amount of detergent required simply place in the dispenser Finish Powder recommended for every day use Finish Liquid Gel ideal for every day use As the gel is extra gentle it is recommended for fine bone china Min 15g If using powder detergents proceed as follows 1 Open the dispenser lid by pulling the catch D 2 Add the detergent according to the instructions given in the Washing programmes chart As all detergents are not the same you should also consult the instructions on the packet 3 Always close the lid 4 Ifthe programme has a prewash add the required detergent in the SID detergent dispenser located in the centre of the upper basket If using detergent in tablets proceed as follows 1 For all programmes place 1 tablet inside the detergent dispenser 2 Always close the lid 3 For all programmes with prewash place a portion of a further tablet on the lid of the detergent dispenser Insufficient quantities of detergent will Y produce poor washing results whereas an excessive amount of detergent will not improve washing results and is also wasteful Using no more than the correct amount also contributes to reducing pollution Compact detergents with enzymes In these compact powders the environmentally unfriendly components have been replaced by natural enzymes and other more biodegradable substances The enzymes deploy their full dirt dissolving p
16. almon Parade Bridgwater Somerset TA6 5PY 11 Eldon Way Eldonwall Trading Estate Bristol BS4 3QQ 266 Main Road Southbourne Emsworth PO10 8JL Unit 8 Enterprise Court Ryde Business Park Ryde Isle of Wight PO33 1DB Unit 2 Zealley Ind Estate Kingsteignton Newton Abbot TQ12 3TD Unit 7D Pool Ind Estate Druids Road Redruth Cornwall TR15 3RH Guarantee conditions Standard guarantee conditions We Zanussi undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials we will at our option repair or replace the same FREE OF CHARGE for labour materials or carriage on condition that e The appliance has been correctly installed and used only on the electricity supply stated on the rating plate e The appliance has been used for normal domestic purposes only and in accordance with the manufacturer s instructions e The appliance has not been serviced maintained repaired taken apart or tampered with by any person not authorised by us e All service work under this guarantee must be undertaken by a Zanussi Service Force Centre e Any appliance or defective part replaced shall become the Company s property e This guarantee is in addition to your statutory and other legal rights Home visits are made between 8 30am and 5 30pm Monday to Friday Visits may be available outside these hours in which cas
17. and Certain types of glass can also become opaque after being washed several times in a dishwasher Achemical reaction can occur between silver cutlery and stainless steel cutlery As a precaution do not wash together Iron and cast iron objects can rust and stain other items Aluminium tends to go black copper pewter and brass tend to stain If in doubt check with manufacturer of the item When buying new dishes ensure that they are dishwasher proof For best results we recommend the use of Finish detergents rinse aid and salt inal DISHWASHER SALT DE15 Type of load Degree of soil Required Recommended Cycle push buttons quantity of detergent description wash prewash 1 Any ON PROGRAMMES 1 cold rinse Partial load to be completed SELECTION to avoid food scraps RINSE AND HOLD later in the day OFF from sticking together Hot prewash 2 Heavy soil ON PROGRAMMES Main wash up to 70 C Crockery cutlery SELECTION 25g 10g 3 cold rinses INTENSIVE 70 C sats andipans OFF 1 hot rinse Turbo dry Warm prewash 3 H l 9 NORMAL PLUS 65 C eavy sol ON PROGRAMMES Main wash up to 65 C Crockery cutlery 2 warm rinses WITH PREWASH y y OFF 25g 10g i pots and pans 1 hot rinse Turbo dry 4 Cold prewash Normal soil PROGRAMMES Main wash up to 65 C NORMAL 65 C Crocker
18. ave energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing If necessary run the Rinse and Hold programme see Washing Programmes chart so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme Do not prewash dishes under running water Select an economic programme when dishes are not very soiled following the instructions given in the Washing programmes chart Select the half load option if only a few dishes need washing Remember to load all the dishes in the selected basket Select a drying option For best washing results Before loading remove all scraps of food and soak very heavily soiled pots and pans Arrange saucepans cups and glasses etc upside down Tilt items with convex or concave surfaces so that the water drains off easily Avoid contact between the dishes as far as possible ltems not suitable for dishwashers The following items should not be washed in the dishwasher unless they are sold as dishwasher proof Cutlery with wooden or horn handles or glued parts bronze cutlery saucepans with wooden handles aluminium ware crystal ware leaded glass plastic items antique or fine decorated china Certain types of decoration can discolour when washed in a dishwasher Crystal ware and plastic objects if not guaranteed dishwasher proof should be washed by h
19. be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided Electrical connection This appliance must be earthed The manufacturer declines any responsibility should this safety measure not be observed If the plug that is fitted to your appliance is not suitable for the socket it must be cut off and the appropriate plug fitted Important The wires on the mains lead are coloured in accordance with the following code Green and Yellow Earth Blue Neutral Brown Live If you fit your own plug the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug Proceed as follows 1 Connect the Green and Yellow earth wire to the CE03 terminal in the plug which is marked with the letter E or the earth symbol or coloured green and yellow 2 Connect the Blue neutral wire to the terminal in the plug which is marked with the letter N or coloured black 3 Connect the Brown live wire to the terminal in the plug which is marked with the letter L or coloured red The plug moulded onto the lead incorporates a 13amp BSI362 fuse Only ASTA or BSI fuses should be used The plug must not be used if the fuse cover carrier is lost The cover ca
20. d Ind Estate Chelmsford Essex CM12 3AE Unit 14 Capitol Park Capitol Way Colindale London NW9 0EQ 194 Court Road Mottingham Eltham London SE9 4EW 284 Alma Road Enfield London EN3 7BB Unit B4 Imperial Business Estate West Mill Gravesend Kent DA11 ODL Unit 6C Elton Park Business Centre Hadleigh Road Ipswich IP2 ODD 16 17 Woodside Ind Park Works Road Letchworth Herts SG6 1LA 2 4 Royal Lane Yiewsley West Drayton Middlesex UB7 8DL Reform Road Maidenhead Berkshire SL6 8BY 10 Island Farm Avenue West Molesey Surrey KT8 2UZ 9 Pipers Court Berkshire Drive Thatcham Berkshire RG19 4ER 2b Trafalgar Street Norwich NR1 3HN Unit 1a The Summit Hanworth Road Sunbury on Thames TW16 5DB SERVICESQFORCE To contact your local Service Force Centre telephone 08705 929 929 ASHFORD FLEET HAYWARDS HEATH TONBRIDGE SOUTH EAST Unit 2 Bridge Road Business Centre Bridge Road Ashford Kent TN23 1BB Unit 1 Redfields Ind Estate Church Crookham Fleet Hampshire GU13 ORD 21 25 Bridge Road Haywards Heath Sussex RH16 1UA Unit 30 Deacon Trading Estate Morley Road Tonbridge TNO 1RA SOUTH WEST BARNSTAPLE BOURNEMOUTH BRIDGEWATER BRISTOL EMSWORTH ISLE OF WIGHT NEWTON ABBOT REDRUTH Main Road Fremington Barnstaple North Devon EX31 2NT 63 65 Curzon Road Bournemouth Dorset BH1 4PW 6 Herswell Business Park S
21. e Organisation is aware of your move and able to look after you and your appliances France Senlis 33 0 3 44 62 28 28 Germany Nurnberg 49 0 911 323 2600 Italy Pordenone 39 0 1678 47053 Sweden Stockholm 46 0 20 78 77 50 UK Slough 44 0 1753 219897 Ireland Dublin 353 0 14090753 152979 72 0 A From the Electrolux Group The world s No 1 choice The Electrolux Group is the world s largest producer of powered appliances for kitchen cleaning and outdoor use More than 55 million Electrolux Group products such as refrigerators cookers vacuum cleaners chain saws and lawn mowers are sold each year to a value of approx 14 billion USD in more than 150 countries around the world Ca 2 08 01 Electrolux Household Appliances Limited 2001
22. e a premium will be charged Exclusions This guarantee does not cover e Damage or calls resulting from transportation improper use or neglect the replacement of any light bulbs or removable parts of glass or plastic e Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom e Appliances found to be in use within a commercial environment plus those which are subject to rental agreements e Products of Zanussi manufacture which are not marketed by Zanussi European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications e The guarantee starts from the date you first purchased your product e The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products e This guarantee relates to you and cannot be transferred to another user e Your new home is within the European Community EC or European free Trade Area e The product is installed and used in accordance with our instructions and is only used domestically i e a normal household e The product is installed taking into account regulations in your new country Before you move please contact your nearest Customer Care centre listed below to give them details of your new home They will then ensure that the local servic
23. e positioned horizontally in the upper basket When finishing loading or unloading close the door as an open door can be a hazard e Do not sit or stand on the open door e Isolate the appliance from the power supply and turn off the water supply after use Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken This product should be serviced by an authorised Service engineer and only genuine spare parts should be used Under no circumstances should you attempt to repair the machine yourself Repairs carried out by inexperienced persons may cause injury or serious malfunctioning Contact your local Service Force Centre Always insist on genuine spare parts Conservation In the interest of the environment Materials marked with the symbol 5 are recyclable Check with your local Council or Environmental Health Office to see if there are facilities in your area for re cycling this appliance When the appliance is to be scrapped cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside Help to keep your country tidy use authorised disposal sites for your old appliance poe ON ea pe no a a eS oN gt 8 Levelling spacers Upper basket stop Upper spray arm Salt container Large filter Detergent dispenser Control panel Rating plate Rinse aid dispenser
24. ghts will illuminate Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary Load the dishes Remove any scraps of food Pull the lower basket out and arrange the saucepans plates and cutlery in it Pull the upper basket out and arrange the plates saucers glasses and cups etc in it Slide the baskets back into the machine Ensure that the spray arms can rotate freely Measure out detergent Add the required amount of detergent into the dispenser Important If the half load option is selected remember to reduce the quantity of detergent Close the detergent dispenser lid Setting and starting the programme without DELAY START The selection of the programme occurs with the door partially opened 7b Press the PROGRAMMES SELECTION push button until the required programme number appears in the digital display see Washing programmes chart To see the duration of the programme in minutes only with open door press the CANCEL push button The following options may also be selected e HALF LOAD by pressing the corresponding push button e ECO DRY or NO DRY by pressing the corresponding push button Close the door the programme will start automatically and an audible signal advises you of this All the indicator lights will turn off The display will show the running time of the programme Setting and starting t
25. he programme with DELAY START Once a programme and required options have been selected see point 7a to use DELAY proceed as follows Press the DELAY push button The digital display will show h 0 If other options have been selected the corresponding indicator lights will turn off but this will not modify the settings made previously Press the button again to select the number of hours by which you wish to delay the programme start up to a maximum of 12 hours To set the time setting to zero press the DELAY push button until h 0 appears in the digital display Close the door an audible signal will confirm the starting of the countdown The digital display shows the delay time which will decrease in steps of 1 hour The progression of the countdown will be confirmed by a flashing dot in the digital display Once the delayed time has elapsed the programme will start automatically and in the digital display will appear the duration of the programme The opening of the door will not stop the countdown To cancel a programme in progress Open the door and press the CANCEL push button A audible signal informs you that the programme under way has been cancelled 3 horizontal lines will appear in the digital display for about 2 seconds then the number of the last selected programme will appear The dishwasher has now returned to setting mode and it is now possible to select a new washing programme
26. hine MA20 MA21 Check that the SID is not clogged with detergent residue If necessary rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards Fasten it back onto the support by turning it clockwise Never use your dishwasher without the SID dispenser Since SID also ensures correct distribution of the water to the upper spray arm running the dishwasher without it will impair the washing results External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scouring pads or solvent acetone trichloroethylene etc Prolonged periods of non operation If you are not using the machine for any period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Fill the rinse aid dispenser 3 Leave the door ajar to prevent the formation of any unpleasant smells 4 Leave the inside of the machine clean Frost precautions Avoid placing the machine in a location where the temperature is below 0 C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water
27. illing with salt i Only use salt specifically designed for use in dishwashers All other types of salt not specifically designed for use in a dishwasher especially table salt will damage the water softener Only fill with salt just before starting one of the complete washing programmes This will prevent any grains of salt or salty water which may have been spilled remaining on the bottom of the machine for any period of time which may cause corrosion To fill 1 To fill with salt unscrew the cap of the salt container 2 Pour 1 litre of water inside the container this is necessary only before filling with salt for the first time 3 Using the funnel provided pour in the salt until the container is full Do not worry if water over flows from the unit when filling with salt this is quite normal 4 Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket 5 Screw on the cap tightly The salt container will require topping up periodically You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished The salt indicator light on the control panel can remain illuminated for 2 6 hours after the salt has been replenished assuming the dishwasher remains switched on If you are using salts that take longer to dissolve then this can take longer The function of the machine is not affected Rinse aid
28. ire SL1 1DZ Tel 08705 727727 calls to this number may be recorded for training purposes SERVICEOFORCE To contact your local Service Force Centre telephone 08705 929 929 CHANNEL ISLANDS GUERNSEY JERSEY Guernsey Electricity PO Box 4 Vale Guernsey Channel Islands GY1 3AD Jersey Electricity Company Haut De L orme Rue De Haut De L orme Trinity Jersey Channel Islands JE3 5FG SCOTLAND ABERDEEN AUCHTERMUCHTY BLANTYRE DUMFRIES DUNOON EDINBURGH GLASGOW INVERNESS ISLE OF ARRAN ISLE OF BARRA ISLES OF BUTE 54 Claremont Street Aberdeen AB10 6RA 33a Burnside Auchtermuchty Fife KY14 7AJ Unit 5 Block 2 Auchenraith Ind Estate Rosendale Way Blantyre G72 0NJ 93 Irish Street Dumfries DG1 2 PQ 7 Hill Street Dunoon Argyll PA23 7AL Unit 12 Dumbryden Ind Estate 2 Dumbryden Road Edinburgh EH14 2AB Unit 4 Wellington Road Bishopriggs Glasgow G64 2SA Unit 3Bl Smithton Ind Estate Smithton Inverness IV2 7WL R Haggerty Bruach Blackwaterfoot Isle of Arran J Zerfah 244 Bruernish Isle of Barra Western Islands HS9 5QY Walker Engineering Glenmhor Upper Serpentine Road Rothesay Isle of Bute PA20 9EH ISLE OF LEWIS ORKNEY PERTH OWN SALES SHETLAND OWN SALES SHETLAND OWN SALES WHALSAY OWN SALES ND Macleod 16 James Street Stornoway Isle of Lewis PA87 2QW 2 6 amp 8 Woodmarket Kelso Borders TD5 7AX
29. ms can be placed upside down in the cup racks Light items plastic bowls etc should be loaded in the upper basket and arranged so they do not move In case that plates are loaded in the upper basket load them starting from the rear positions of the basket tilting them forwards and avoiding the front positions near the door Before closing the door ensure that the spray arms can rotate freely Adjusting the height of the upper basket If washing very large plates over 27 cm and up to 32 cm in diameter you can load them in the lower basket after moving the upper basket to the higher position Attention Never lift or lower the basket on one side only To move to the higher position proceed as follows 1 Pull out the basket until it stops 2 Carefully lift both sides upwards until the mechanism is engaged and the basket is stable When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup racks To lower the basket to the original position proceed as follows 1 Pull out the basket until it stops 2 Carefully lift both sides upwards and the allow the mechanism to drop back slowly keeping hold of it After loading your machine always close the door as an open door can be a hazard US47 TTT TTN UVVANED 12 To s
30. n is not available with programmes 1 Rinse and Hold and 10 Plate warmer If NO DRY is selected the supply of rinse aid is automatically excluded If both indicator lights are off the full drying cycle will be carried out 7 DELAY START push button Allows the start of the programme to be delayed by a minimum of 1 hour up to 12 hours 8 CANCEL push button See page 16 Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing Short instruction accepted signal When any of the push buttons are pressed except the ON OFF push button a short audible signal informs you that the machine has accepted the instruction given Long programme run signal A continuous audible signal informs you once closed the door that the washing programme is starting Intermittent end of programme signal A short intermittent audible signal informs you that the washing programme has ended Alarm intermittent signal The machine is fitted with a number of alarm systems to help you determine the cause of any problems see Something not working An intermittent audible signal informs you that an alarm is activated To deactivate these audible signals press simultaneously both PROGRAMMES SELECTION and DRY push buttons for at least 5 seconds at the end of which 3 short intermittent audible signals inform you that the audible signals have been deac
31. ower at a temperature as low as 50 C By choosing the BIO programmes you can therefore achieve the same cleaning results that would otherwise be achievable only with 65 C programmes and conventional detergents Loading your appliance Before placing dishes in the machine remove any scraps of food to avoid clogging the filters and consequently reducing the performance AA A iy i Do not load very small items which can fall Vise wo through the baskets VON WO Pe ee CU WS ska 4 Aull w Open the door and slide out the baskets to load the aad dishes The lower basket The lower basket is designed to take saucepans lids plates salad bowls cutlery etc Serving dishes and large lids should be arranged around the edge of the basket ensuring that the upper spray arm can turn freely GL e l my Ru Mii SS SE U SS The two rear rows of prongs on the lower basket can be easily lowered to allow you to load pots pans and bowls To lower the prongs Slightly pull them upward and let them drop down see picture To bring them back to the standing position just pull them up again uns 10 The cutlery basket Long bladed knives stored in an upright position are a potential hazard These items should only be places in the remo
32. rrier is indicated by the coloured insert at the base of the product A replacement cover carrier must be obtained from your local Service Force Centre This appliance complies with the following E E C Directives 73 23 or 19 2 73 Low Voltage Directive and subsequent modifications 89 336 or 3 5 89 Electromagnetic Compatibility Directive and subsequent modifications 23 Service and spare parts In the event of your appliance requiring service or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning 08705 929 929 Your telephone call will be automatically routed to the Service Force centre covering your post code area The addresses are listed on the following pages Before calling out an engineer please ensure you have read the details under the heading Something Not Working When you contact the Service Force Centre you will need to give the following details 1 Your name address and post code 2 Your telephone number 3 Clear and concise details of the fault 4 The model and serial number found on the rating plate 5 The purchase date Customer Care Department For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www zanussi co uk Customer Care Department Zanussi 55 77 High Street Slough Berksh
33. tivated MEPROGRAMMES UPPER W ECO DRY SELECTION Y LoweR WM NODRY S0256 5 ie To reactivate these audible signals press simultaneously both PROGRAMMES SELECTION and DRY push buttons for at least 5 seconds at the end of which 3 short intermittent audible signals inform you that the audible signals have been reactivated Both operations to deactivate or reactivate the audible signals can be carried out before starting or during a washing programme Before using your dishwasher for the first time 1 Ensure that the electrical and water connections comply with the installation instructions 2 Remove all packaging from inside the appliance 3 Set the water softener 4 Pour 1 litre of water inside the salt container and then fill with salt 5 Fill the rinse aid dispenser 6 Runa Rinse and Hold programme vater Dalcness Level Clarke French PPM Use of d d Part Setting the water softener grees TH a Woe The dishwasher is equipped with a water softener 0 0 6 0 8 0 80 NO designed to remove minerals and salts from the 1 7 10 9 14 81 140 YES water supply which would have a detrimental or 2 41 14 15 20 141 200 YES adverse effect on the operation of the appliance eee are eee The higher the content of these salts the harder a i i your water is 4 22 28 31 40 301 400 YES Water hardness is measured in equivalent scales 5 29 35 41 50 401 500 YES Clarke degrees French degrees and PPM parts
34. vable knife basket Take care when loading or unloading sharp items such as knives Removable knife basket Long and or sharp items of cutlery such as carving knives must be placed horizontally in the removable knife basket provided to be positioned at the rear of the upper basket ul SS SS I a gaa TE SSS Cutlery should be placed in the removable cutlery basket with the handles facing downwards If the handles protrude from the bottom of the basket obstructing the lower spray arm load the cutlery with the handles facing upwards Mix spoons with other cutlery to prevent them from sticking together The cutlery basket is in two parts which can be separated to give greater loading flexibility To separate the two parts slide them horizontally in opposite directions and pull them apart To reassemble reverse the procedure For best results we recommend you to use the cutlery grids provided if the size and dimensions of the cutlery allow it Ul63 The upper basket The upper basket is designed for plates dessert plates saucers dinner plates of up to 25 cm in diameter salad bowls cups and glasses Arrange items so that water can reach all surfaces Glasses with long ste
35. y and cutlery ON SELECTION 259 5g 2 cold rinses WITH PREWASH OFF 1 hot rinse Turbo dry 5 Cold prewash Main wash up to 50 C ECONOMY 50 Light soil ON SELECTION 25 g 5g 2cold rinses WITH PREWASH Crockery and cutlery OFF 1 hot rinse Turbo dry Cold prewash 6 SRGGRANIMNES Main wash up to 50 C BIO 50 C Normal soil ON SELECTION 25g 5g 2 cold rinses WITH PREWASH Crockery and cutlery OFF 1 hot rinse Turbo dry Main wash up to 50 C 7 PROGRAMMES 1 4 d a a cutlery OFF hais 30 g 1 hot nee NO PREWASH Turbo dry 8 Light soil ON MER go oe QUICK WASH 55 C Crockery and cutlery OFF g a hotiihse Cold prewash 9 Main wash up to 45 C DELICATE ASG Normalsi ON mSiecmnon 25g 5g 2cold rinses WITH PREWASH Delicate china and glassware OFF 1 hot rinse Turbo dry This is a programme 10 designed both to heat plates before serving or remove ON SEENON 1 hot ri PLATE WARMER dust from dishes which have OFF ican ives not been used for a long time Testing programme for EN 50242 see Hints for Test Centres This is a special programme for quick washing a full load of lightly soiled crockery except pots so that you may re use them promptly 14 Ta Check the filters Ensure they are clean and properly positioned see Maintenance and cleaning Press the ON OFF push button The display will show the last selected programme if programme options have been selected the corresponding li
Download Pdf Manuals
Related Search