1. THIS ADDITIONAL INSTRUCTION MUST BE ATTACHED TO AND READ IN CONJUNCTION WITH THE INSTALLATION AND USER INSTRUCTIONS FOR e Yeoman Boiler Stove PM302 The following addition has been designed to compliment the above manual This addition should be located after e Section 7 Ash Removal User Section 1 FITTING THE WOODBURNING TRAY 1 1 In order to burn wood continuously in this appliance a Wood Burning Tray should be fitted Diagram 1 2 2 Remove the Multi fuel Grate from the appliance see Page 23 Section 4 2 3 To fit the Wood Tray e Remove the Log Bar and Ashlip e Hold the tray flat with the front edge indicated by the supports Diagram 3 pointing forwards e Tip diagonally and insert through the front of the stove Diagram 2 e Place flat on the fixings on the bottom of the appliance Diagram 3 e Fit the plug supplied in the right hand side where the riddling mechanism is located Diagram 4 PR8454 e Replace the Log Bar and the Ashlip PM340 Issue 1 December 2009