Yamaha PW5000 Owner's Manual
Contents
1. POWER ON OFF Switch After connecting the PW 5000 to the PM5000 console using the cable supplied with the PM5000 and after plugging the PW 5000 power cord into an appropriate AC outlet use this switch to turn power to the PM5000 ON or OFF OPERATION MONITOR Displays the status of the four independent power supply lines to the PM5000 The green NORMAL indicators light when operation is normal If abnormal operation is detected on any supply line the red CAUTION indicator for that line will light and the corresponding supply may shut down The CAUTION indicator will remain lit even if the supply is shut down If this happens note which CAUTION indicator was lit turn the POWER ON OFF switch OFF and contact your Yamaha dealer or maintenance personnel HIGH Indicator This indicator lights when the unit s cooling fan is operating at its highest speed High speed operation can be activated by either of the following conditions e The FAN SPEED switch is set to HIGH e The FAN SPEED switch is set to AUTO and the PW5000 s internal temperature exceeds a preset threshold in this case the THERMAL indicator will also light STOP Indicator This indicator will light if the unit s cooling fan stops operating THERMAL Indicator Lights if the PW5000 internal temperature exceeds a preset threshold If thi2. YAMAHA POWER SUPPLY PW 5000 For PM5000 Series Mixing Consoles Owner s Manual Thank you for purchasing a PW5000 Power Supply The PW5000 has been specifically designed for use with Yamaha PM5000 Series Mixing Consoles In order to achieve optimum performance from the PW5000 and take full advantage of the features it provides please read this manual carefully and keep it handy for future reference The illustrations as shown in this Owner s Manual are for instructional purposes only and may be different from the ones on your device The company names and product names in this Owner s Manual are the trademarks or registered trademarks of their respective companies CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The above warning is located on the rear of the unit wech zl O Oo FF Go ND Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magni tude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte
3. unit cannot be 4000 and PM3500 series mixing consoles or in place of the PW1D for ng console ments and vol PM5000 console to connect the PW5000 el connecting two PW5000 units use the Link Cable to connect the second used in place of the PW4000 for the The same connectors are used but with ages Yamaha cannot be held responsible for damage caused by improper use or modifications to the device or data that is lost or destroyed Always turn the power off when the device is not in use The performance of components with moving contacts such as switches and connectors deteriorates over time Consult qualified Yamaha service personnel about replacing defective components 1 2 FCC INFORMATION U S A 1 IMPORTANT NOTICE DO NOT MODIFY THIS UNIT This product when installed as indicated in the instructions con tained in this manual meets FCC requirements Modifications not expressly approved by Yamaha may void your authority granted by the FCC to use the product IMPORTANT When connecting this product to accessories and or another product use only high quality shielded cables Cable s supplied with this product MUST be used Follow all installation instructions Failure to follow instructions could void your FCC authorization to use this product in the USA NOTE This product has been tested and found to comply with the requirements listed in FCC Regulations Part 15 for Cla
4. Corporation reserves the right to change or modify products or specifications at any time without prior notice Since specifications equipment or options may not be the same in every locale please check with your Yamaha dealer European models Purchaser User Information specified in EN55103 1 and EN55103 2 DC OUTPUT connector as seen from the rear panel Inrush Current 55A DC PARALLEL INPUT pin assignments are flipped Conforms to Environments E1 E2 E3 and E4 horizontally rousen PW 5000 BA For details of products please contact your nearest Yamaha representative or the authorized distributor listed below Pour plus de d tails sur les produits veuillez vous adresser 4 Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante NORTH AMERICA CANADA Yamaha Canada Music Ltd 135 Milner Avenue Scarborough Ontario MIS 3R1 Canada Tel 416 298 1311 U S A Yamaha Corporation of America 6600 Orangethorpe Ave Buena Park Calif 90620 U S A Tel 714 522 9011 CENTRAL amp SOUTH AMERICA MEXICO Yamaha de Mexico S A De C V Departamento de ventas Javier Rojo Gomez No 1149 Col Gpe Del Moral Deleg Iztapalapa 09300 Mexico D F Tel 55 5804 0600 BRAZIL Yamaha Musical do Brasil LTDA Av Rebou as 2636 S o Paulo Brasil Tel 011 3085 1377 ARGENTINA Yamaha Music Latin America S A Sucursal de Argentina Viamonte 1145 Piso2 B 1053 Buenos Aires Argentina Tel 1 4
5. of the side panels When rack mounting the PW5000 be sure to use mounting hardware that is the correct size for the rack and attach securely at both the front and rear ends of the unit A Optional PSL5000 power Supply Link Cable DC OUTPUT DC PARALLEL DC INPUT OUTPUT emm om PW5000 PW5000 D PW 5000 E Dimensions 434 E BEE S S S e Si ei SI e EI T d 7 8 480 S mm 345 Cnm E Specifications General Specifications Power Supply Cable Pin Assignments U S Canada 120 V 60 Hz No Function No Function Power Supply Australia 240 V 50 Hz Other 230 V 50 Hz l N D Iddi E U S Canada 1100 W 1250 VA 2 IS 16 PSTV OND E Other 1100W 3 FRAME GND 17 12V GND Dimensions W x H x D 480 mm x 186 mm x 459 mm 4 16V 18 12V GND Weight 34 kg 5 16V 19 48V i EE 6 16V GND 20 PW CAUTION Cooling Fen Speed Seines HIGH continuous operation at max AUTO 3 speed automatic 7 12V GND 21 16V GND 8 REMOTE 22 12V 9 16V 23 12V Power Connector Pin Diagram DC OUTPUT 10 16V 24 48V GND 11 16V GND 25 12V 12 12V GND 26 12V 13 REMOTE 27 12V 14 16V Specifications and descriptions in this owner s manual are for E e en eo information purposes only Yamaha
6. 371 7021 PANAMA AND OTHER LATIN AMERICAN COUNTRIES CARIBBEAN COUNTRIES Yamaha Music Latin America S A Torre Banco General Piso 7 Urbanizaci n Marbella Calle 47 y Aquilino de la Guardia Ciudad de Panam Panam Tel 507 269 5311 EUROPE THE UNITED KINGDOM Yamaha Kemble Music U K Ltd Sherbourne Drive Tilbrook Milton Keynes MK7 8BL England Tel 01908 366700 GERMANY Yamaha Music Central Europe GmbH Siemensstra e 22 34 25462 Rellingen Germany Tel 04101 3030 SWITZERLAND LIECHTENSTEIN Yamaha Music Central Europe GmbH Branch Switzerland Seefeldstrasse 94 8008 Z rich Switzerland Tel 01 383 3990 AUSTRIA Yamaha Music Central Europe GmbH Branch Austria Schleiergasse 20 A 1100 Wien Austria Tel 01 60203900 THE NETHERLANDS Yamaha Music Central Europe Branch Nederland Clarissenhof 5 b 4133 AB Vianen The Netherlands Tel 0347 358 040 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgef hrten Niederlassung und bei Yamaha Vertragsh ndlern in den jeweiligen Bestimmungsl ndern erh ltlich Para detalles sobre productos contacte su tienda Yamaha m s cercana o el distribuidor autorizado que se lista debajo BELGIUM LUXEMBOURG Yamaha Music Central Europe GmbH Branch Belgium Rue de Geneve Genevastraat 10 1140 Brussels Belgium Tel 02 726 6032 FRANCE Yamaha Musique France BP 70 77312 Marne la Vall e Cedex 2 France Tel 01 64 61 4000 ITALY Yamaha Musica
7. A54220 0306MWAP5 1 01A0 Printed in Japan
8. Italia S P A Combo Division Viale Italia 88 20020 Lainate Milano Italy Tel 02 935 771 SPAIN PORTUGAL Yamaha Hazen M sica S A Ctra de la Coruna km 17 200 28230 Las Rozas Madrid Spain Tel 91 639 8888 SWEDEN Yamaha Scandinavia AB J A Wettergrens Gata 1 Box 30053 S 400 43 G teborg Sweden Tel 031 89 34 00 DENMARK YS Copenhagen Liaison Office Generatorvej 8B DK 2730 Herlev Denmark Tel 44 92 49 00 NORWAY Norsk filial av Yamaha Scandinavia AB Grini N ringspark 1 N 1345 ster s Norway Tel 67 16 77 70 OTHER EUROPEAN COUNTRIES Yamaha Music Central Europe GmbH Siemensstra e 22 34 25462 Rellingen Germany Tel 49 4101 3030 AFRICA Yamaha Corporation Asia Pacific Music Marketing Group Nakazawa cho 10 1 Hamamatsu Japan 430 8650 Tel 81 53 460 2313 MIDDLE EAST TURKEY CYPRUS Yamaha Music Central Europe GmbH Siemensstra e 22 34 25462 Rellingen Germany Tel 04101 3030 OTHER COUNTRIES Yamaha Music Gulf FZE LB21 128 Jebel Ali Freezone P O Box 17328 Dubai U A E Tel 971 4 881 5868 HEAD OFFICE Yamaha Corporation Pro Audio amp Digital Musical Instrument Division Nakazawa cho 10 1 Hamamatsu Japan 430 8650 Tel 81 53 460 2441 PA07 Yamaha Manual Library http www2 yamaha co jp manual english ASIA INDONESIA PT Yamaha Music Indonesia Distributor PT Nusantik Gedung Yamaha Music Center Jalan Jend Gatot Subroto Kav 4 Jakarta 12930 Ind
9. LY to those products distributed by Yamaha Corporation of America or its subsidiaries This applies only to products distributed by YAMAHA CORPORATION OF AMERICA class B IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord WARNING THIS APPARATUS MUST BE EARTHED IMPORTANT The wires in this mains lead are coloured in accordance with the following code GREEN AND YELLOW EARTH BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN and YELLOW The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the termi nal which is marked with the letter L or coloured RED e This applies only to products distributed by Yamaha Kemble Music U K Ltd 3 wi res 5 1 2 2 Controls and Connectors E Front Panel E YAMAHA owen supper PW 5000 O POWER OPERATION MONITOR LINE VOLTAGE NORMAL O O O o 16 16 12 448 camo o o o o
10. alfunctioning discontinue use immediately and have it inspected by qualified Yamaha service personnel N CAUTION Water warning e Do not expose the device to rain use it near water or in damp or wet conditions or place containers on it containing liquids which might spill into any openings e Never insert or remove an elect ic plug with wet hands If you notice any abnormality e f the power cord or plug becomes frayed or damaged or if there is a sudden loss of sound during use of the should appear to be caused by device or if any unusual smells or smoke it immediately turn off the power switch disconnect the electric plug from the outlet and have the device inspected by qualified Yamaha service personnel e fthis device should be dropped or damaged immediately turn off the power switch disconnect the electric plug from the outlet and have the device inspected by qualified Yamaha service personnel Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others or damage to the device or other property These precautions include but are not limited to the following Power supply Power cord e Remove the electric plug from the out extended periods of time or during e e When removing the electric plug from plug itself and not the cord Pulling by the cord can e Turn the unit ON or OFF using only th the unit ON or OFF by plugging or unp on a power
11. e is adequate space between wal e Do generate noise he device and any surrounding or other devices at least 15cm behind and 15cm above not use the device in the vicinity of a TV phone or other electric devices Otherwise radio stereo equipment mobile the device TV or radio may e Before connecting the device to devices levels to minimum other devices turn off the power for all Before turning the power on or off for all devices set all volume e Be sure to connect to a properly grounded power source A ground screw terminal preventing electrical shock is provided on the rear panel for safely grounding the device and Handling caution e Do not insert your fingers or hand in any gaps or openings on the device vents etc e Avoid inserting or dropping any gaps or openings on the oreign objects paper plastic metal etc into device vents etc If this happens turn off the power immediately and unplug the power cord from the AC outlet Then have the device inspected by qual ified Yamaha service personnel e Do not rest your weight on the device or place heavy objects on it and avoid use excessive force on the buttons switches or connectors Use the cable supplied with the to the PM5000 When paral CH This power supply P the PM1D di dif gital mixi erent pin assign optional PSL5000 Power Supply PW5000 to the main PW5000 unit
12. nance servicing instructions in the litera ture accompanying the product IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instruc tions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polar ized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE 10 11 12 13 14 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the man ufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus c
13. ombination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service person nel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference A WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock short circuiting damages fire or other hazards These precautions include but are not limited to the following Power supply Power cord e Only use the voltage specified as corr ect for the device The required voltage is printed on the name plate of the device e Do not place the power cord near heat excessively bend or otherwise damage the cord place heavy it or place it in a position where anyone could walk on trip over and do not objects on or roll anything over it Do not open e Do not open the device or attempt to d them in any way The device contains sources such as heaters or radiators isassemble the internal parts or modify no user serviceable parts If it should appear to be m
14. onesia Tel 21 520 2577 KOREA Yamaha Music Korea Ltd Tong Yang Securities Bldg 16F 23 8 Yoido dong Youngdungpo ku Seoul Korea Tel 02 3770 0660 MALAYSIA Yamaha Music Malaysia Sdn Bhd Lot 8 Jalan Perbandaran 47301 Kelana Jaya Petaling Jaya Selangor Malaysia Tel 3 78030900 SINGAPORE Yamaha Music Asia Pte Ltd No 11 Ubi Road 1 No 06 02 Meiban Industrial Building Singapore Tel 747 4374 TAIWAN Yamaha KHS Music Co Ltd 3F 6 Sec 2 Nan Jing E Rd Taipei Taiwan 104 R O C Tel 02 2511 8688 THAILAND Siam Music Yamaha Co Ltd 121 60 61 RS Tower 17th Floor Ratchadaphisek RD Dindaeng Bangkok 10320 Thailand Tel 02 641 2951 THE PEOPLE S REPUBLIC OF CHINA Yamaha Music amp Electronics China Co Ltd Shanghai Branch United Plaza 25F 1468 Nan Jing Road West Jingan Shanghai 200040 China Tel 21 6247 2211 OTHER ASIAN COUNTRIES Yamaha Corporation Asia Pacific Music Marketing Group Nakazawa cho 10 1 Hamamatsu Japan 430 8650 Tel 8 1 53 460 2313 OCEANIA AUSTRALIA Yamaha Music Australia Pty Ltd Level 1 99 Queensbridge Street Southbank Victoria 3006 Australia Tel 3 9693 5111 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation Asia Pacific Music Marketing Group Nakazawa cho 10 1 Hamamatsu Japan 430 8650 Tel 8 1 53 460 2313 YAMAHA M D G Pro Audio amp Digital Musical Instrument Division Yamaha Corporation 2003 Yamaha Corporation W
15. s occurs it is possible that the unit s cooling efficiency is being adversely affected by the setup location or other external conditions Check your installation and revise if necessary to allow unimpeded airflow to and from the unit s vents LINE VOLTAGE Display Displays the current AC line voltage The AC voltage is continuously displayed as long as the PW5000 is plugged into an active AC outlet regardless of the POWER ON OFF switch setting FAN SPEED Switch Sets the speed or operational mode of the cooling fan When set to AUTO the speed of the fan will automatically be adjusted in three stages according to the unit s internal temperature The THERMAL indicator will light when the highest speed is activated When set to HIGH the fan will operate continuously at the highest speed regardless of the unit s internal temperature Never obstruct the cooling vents located on the front and rear panels of the PW5000 nn PW 5000 SE E Rear Panel E m i QYAMAHA power suppi DC PARALLEL INPUT DC OUTPUT lt C Ea c mila E oO C lt C C c gt C C g C C gt C C Wb c d GC C gt C DC PARALLEL INPUT Connector This connector is used to connect two PW5000 units in parallel Two PW5000 s can be connected in this way to distribute the po
16. ss B digital devices Compliance with these requirements provides a reason able level of assurance that your use of this product in a residential environment will not result in harmful interference with other elec tronic devices This equipment generates uses radio frequencies and if not installed and used according to the instructions found in the users manual may cause interference harmful to the operation of other electronic devices Compliance with FCC regulations does not guarantee that interference will not occur in all installations If this product is found to be the source of interference which can be determined by turning the unit OFF and ON please try to elimi nate the problem by using one of the following measures Relocate either this product or the device that is being affected by the interference Utilize power outlets that are on different branch circuit breaker or fuse circuits or install AC line filter s In the case of radio or TV interference relocate reorient the antenna If the antenna lead in is 300 ohm ribbon lead change the lead in to co axial type cable If these corrective measures do not produce satisfactory results please contact the local retailer authorized to distribute this type of product If you can not locate the appropriate retailer please con tact Yamaha Corporation of America Electronic Service Division 6600 Orangethorpe Ave Buena Park CA90620 The above statements apply ON
17. tap a breaker switch or s damage et when the device is not to be used for ectrical storms he device or an outlet always hold the damage it e front panel POWER switch Turning ugging the power cord using a switch milar external means can result in e Do not turn the POWER switch OFF an d ON in rapid succession Doing so can result in excessive voltages that can cause damage Wait at least 5 seconds be ore turning the POWER switch ON after it has been turned OFF e When transporting or moving the dev e Before moving the device remove all e Dono heat such as in direct sunligh prevent the possibility o components ace the devi ce ock the vents T to prevent the internal temperature fro place the device on its side or upside in an unstable posi his device has ventilation holes ventilated location such as a bookcase or c ice always use two or more people connected cables expose the device to excessive dust or vibrations or extreme cold or near a heater or in a car during the day to panel disfiguration or damage to the internal ion where it might accidentally at the front and rear ng too high In particular do not or place it in any poorly oset m risi down e Do not place the device against a wall or ot her devices since this can cause inadequate air circulation and possibly res ult in the device overheating ake sure ther
18. wer load thus reducing the load on each unit and to ensure uninterrupted failsafe operation in the even that one unit shuts down Use only the optional PSL5000 Power Supply Link Cable for this connection Rotate the connector ring to the left to connect or to the right to disconnect DC OUTPUT Connector Use this connector to connect the PW5000 to the PM5000 console When using parallel connected PW5000 units this connector connects to the DC PARALLEL INPUT connector on the main PW5000 unit Always use the cable supplied with the PM5000 console to connect the PW5000 to the console A second PW5000 should be parallel connected to the main PW5000 only using the optional PSL5000 Power Supply Link Cable Rotate the connector ring to the left to connect or to the right to disconnect Parallel connected PW5000 Power Supplies PM5000 EARTH Screw Terminal For maximum safety be sure to securely attach a confirmed earth line to this terminal An earth line is also included in the power supply cable so the unit will be properly earthed if the AC outlet used is earthed If the AC outlet is not earthed be sure to properly connect the EARTH terminal Proper earthing not only ensures safety but it also guarantees minimum noise from hum and interference Rack mounting holes are provided near the rear edges
Download Pdf Manuals
Related Search