Home

Yamaha YSP-4100BL Owner's Manual

1. SET MENU items Menu Sub menu Features Page MEMORY LOAD Loads the beam and sound settings saved in the 19 memory SAVE Saves the current beam and sound settings to the 19 memory AUTO SETUP BEAM SOUND OPTIMZ Optimizes the beam and sound settings 16 automatically Playback BEAM OPTIMZ ONLY Optimizes the beam settings automatically 16 SOUND OPTIMZ ONLY Optimizes the sound settings automatically 16 MANUAL SETUP SETTING PARAMETERS Adjusts the listening room and listening position 34 Playback mode settings BEAM ADJUSTMENT Adjusts the various sound beam settings 35 FM tuning IMAGE LOCATION Adjusts the sound position of the front right and left 35 channels SOUND SET MENU TONE CONTROL Adjusts the output level of high frequency or low 36 SIRIUS Satellite frequency sound Radio tuning SUBWOOFER SET Configures the subwoofer settings 36 AUDIO DELAY Adjusts delay in output timing between video signals 36 Playing back iPod and audio signals DRC Dynamic Range Control Adjusts the dynamic range 37 BASS EXTENSION Selects the bass sound extension 37 Useful features MUSIC ENHANCER Selects the compressed audio enhancer 37 CHANNEL LEVEL Adjusts the volume of each channel 37 SOUND OUT MENU SOUND BEAM OUT CONFIG Configures the sound beam output settings 37 Customizing this unit SET MENU SOUND OUT Configures the audio signal output settings 37 INPUT MENU INPUT ASSIGNMENT Assigns ja
2. indicates the 12 digit Sirius ID of your SiriusConnect tuner appears on the front panel display Write the Sirius ID below ID 3 Contact SIRIUS Satellite Radio to activate your subscription SIRIUS Satellite Radio online information Contact for activation URL https activate siriusradio com Phone 1 888 539 SIRIUS 1 888 539 7474 Mr AOA Status messages appear on the front panel display during the activation For details see SIRIUS Satellite Radio page 44 Once the activation is finished SUB UPDATED appears SIRIUS Satellite Radio operations 1 Press ORADIO repeatedly to select SIRIUS The SIRIUS indicator lights up on the front panel display and the SIRIUS Satellite Radio information for the currently selected channel appears on the front panel display Light up SIRIUS Channel number Channel name When you select SIRIUS as the input source this unit automatically recalls the previously selected channel When you have not activated your subscription yet you can only select 184 or 000 If a status message or an error message appears on the front panel display see SIRIUS Satellite Radio page 44 2 Search for a channel by using one of the SIRIUS Satellite Radio search modes To select a channel from the all channel list see All Channel Search mode on this page To select a
3. 14 I N System configurations ADVANCED SETUP 40 Preparing the remote control 14 Usi 1 lifi 41 Installing batteries in the remote control 14 sng a external a ua DS MEME Operation range of the remote control 14 Controlling external components 5 w Changing OSD language gt AUTO SETUP RtelliBeam 15 x Installing the IntelliBeam microphone 15 Troubleshooting 43 m Using AUTO SETUP IntelliBeam s sssssesseeseeeeieeeee 16 Glossary Using the system memorby 19 Specifications m Saving settings UM UP 19 List of remote control codes mco S 49 o Loading settings 19 Index 56 PLAYBACK FEATURES ass siasa 21 Playing back sources 21 Playing back TV sounds 21 Playing back playet esee rette eene 21 Muting audio 21 Decoder and input channel indicators 21 Playback mode 2 6 eterne eee eter 22 Selecting surround or stereo playback 22 Enjoying CINEMA DSP 22 Changing the audio output method for surround playback iere tr ad
4. 23 Configuring input source settings Connecting audio video components Connecting Blu ray disc player 2222 56 En Connecting external components 12 Connecting FM antenna Connecting SiriusConnect tuner Connecting subwoofer sssssseeee Connecting TV Connections Controlling external component Corner installation placement CROSS OVER Subwoofer settings Crossover Subwoofer settings Cursor keys controlling external component Cursor keys Remote control Customizing this Ult erret titt E D Decoder indicators Decoder Mode option menu Decoder mode option menu DEMO MODE ADVANCED SETUP Demo mode ADVANCED SETUP DIGITAL IN jacks Direct number access SIRIUS Satellite Radio Display language change 6 DISPLAY MENU detente Displaying input signal information DISTANCE Subwoofer settings Distance Subwoofer settings sss Dolby Digital Plus glossary Dolby Digital Surround EX glossary Dolby Digital glossary Dolby Pro Logic II glossary Dolby Pro Logic IIx glossary Dolby Surround glossary Dolby TrueHD glossary Dolby DTS DRC Dynamic range control ies Drama CINEMA DSP program DRC Dynamic Range CTRL SOUND SET MENU eter teorie oiov ton 37 DTS 96 24 gloss
5. Russian DEUTSCH aes Fran ais Initial setting ENGLISH English ESPANHOL ITAL TARO HEDERLANDS 3 To exit from the menu press SETUP Ces Wee Dour CENTER Enter AUTO SETUP IntelliBeam This unit creates a sound field by reflecting sound beams off the walls of your listening room and by broadening the cohesion of all the channels Just as you would arrange the speaker position of other audio systems you need to set the beam angle to enjoy the best possible sound from this unit After you have completed the AUTO SETUP procedure be sure to disconnect the IntelliBeam microphone The IntelliBeam microphone is sensitive to heat Keep the IntelliBeam microphone away from direct sunlight Do not place the IntelliBeam microphone on top of this unit You cannot use the AUTO SETUP when PREOUT is selected in SOUND OUT page 38 You cannot run the AUTO SETUP while playing back the iPod iPhone by using PDX 50TX To run the AUTO SETUP stop playback and then disconnect the iPod iPhone from PDX 50TX About 50 refer to Safety and Accessory Information separate booklet als 22 stal i ng th tel Use the supplied cardboard microphone stand or tripod m icrop ho ne to place the IntelliBeam microphone at the same height as your ears would be when you are seated Follow the procedure below to connect the IntelliB
6. net 2 Optical digital AUX 2 DIGITAL IN FS 32 kHz 44 1 kHz 48 kHz 64 kHz 88 2 kHz 96 kHz 1 Coaxial digital AUX 1 VIDEO IN 1 Composite U S A Canada Korea and General models NTSC Other models PAL AUX 2 VIDEO IN 1 Component HDMI IN Output Jacks SUBWOOFER VIDEO OUT composite input or menu screen U S A Canada Korea and General models Other models HDMI OUT System Connector Jack INTELLIBEAM MIC Microphone input 1 System control woofer power interlock 1 System control 1 System control 48 En FM SECTION Tuning Range U S A and Canada models 87 5 to 107 9 MHz Other models 87 50 to 108 00 MHz Wireless FREQUENCY 2 4 GHz GENERAL Power Supply U S A and Canada models Australia model AC 120 V 60 Hz AC 220 240 V 50 60 Hz AC 220 240 V 50 60 Hz Korea model AC 220 240 V 50 60 Hz General model 110 120 V 50 60 Hz Europe and Russia models China and Asia models AC 220 240 V 50 60 Hz Power iss e ot ren RU RIO TOi ET Ib rs 55W Standby Power Consumption HDMI Control OFF Wireless Power OFF 0 5 W or less HDMI Control ON yAir
7. If a subwoofer with adjustable volume and crossover frequency controls is connected to this unit turn it on set the volume to about half way and then set the crossover frequency to the maximum as shown below VOLUME CROSSOVER HIGH CUT L 1 MIN MAX MIN MAX X Subwoofer Using AUTO SETUP IntelliBeam You can select one of the following AUTO SETUP types depending on your purpose BEAM SOUND OPTIMZ Beam optimization and sound optimization Use to optimize the beam angle delay volume and quality so that the parameters best match your listening environment It is recommended that you should select this optimization feature in the following cases If you make settings for the first time If the unit has been relocated If your listening room has been restructured ftheobjects in your listening room furniture etc have been rearranged This menu takes about three minutes BEAM OPTIMZ ONLY Beam optimization only Use to optimize the beam angle so that the parameter best matches your listening environment This menu takes about one minute SOUND OPTIMZ ONLY Sound optimization only Use to optimize the beam delay volume and quality so that the parameters best match your listening environment You must optimize the beam angle with BEAM OPTIMZ ONLY before starting SOUND OPTIMZ ONLY It is recommended that you should select this optimizatio
8. MEMORY Load How 7 Push CENTER to Load 9 Press GENTER The beam and sound settings saved in the selected memory number are loaded MEMORY Loading PLAYBACK FEATURES Playing back sources This section describes how to playback source input from your external components For details on your external components refer to the owner s manual supplied with each component 1 Press Power 0 key to turn on this unit 2 on external componenis TV Blu ray disc player etc connected to this unit 3 Press one of the input selector keys to select an external component as an input source Input source name You can change the input source name displayed on front panel display page 38 4 Start playback of the external component that you have selected as the input source or select a radio station on the tuner FM tuning page 25 Playing back iPod iPhone page 30 5 Press VOLUME to adjust the volume Volume 6 Press Power 0 key to turn this unit to the standby mode Playing back TV sounds 1 Select the desired TV channel 2 Press to select the TV as the input source 3 Mute the sound output on the TV Playing back a player 1 Select the player as the video input on the TV 2 Press OHDMI1 4 or OAUX1 2 to select the player as the input source For example if the player is connected to the HDMI IN 1 jack of this u
9. 40 to 50 lt 6 For better listening environment Example 1 Install this unit as close to the exact center of the wall as possible Example 2 Install this unit so that the sound beams can be reflected off the walls WALK EUX Example 3 Install this unit as close to the exact front of your normal listening position as possible NOILONGOHINI D gt gt 2 S3d nl1V3a33 MOVEAV 1d SONILLAS XIGNAddV 11 En Before connecting components Component video Cables used for connections The symbols on the left of cable names such as 1 1 and correspond with the symbols described in Connecting your TV and Blu ray disc player page 12 and Connecting audio video components page 13 B information on HDMI An HDMI cable can transmit both audio and video signals at the same time If your TV and other components have HDMI jacks use For audio and video HDMI cable HDMI cables for simpler and easier connections See also Using the HDMI control function page 31 INPUT a MENU page 38 Input source Audio signal type For i or audio Blu ray disc Dolby Digital Dolby Digital Plus Dolby TrueHD HD DVD DTS DTS HD High Resolution Audio DTS HD eau Audio pin cable supplied Master Audio 2 channel
10. Adjusting the volume Selecting a device to reproduce TV sounds this unit or TV E a Even if your TV supports the HDMI control function some functions may not be available For details refer to the manual supplied with your TV f you connect this unit and Blu ray disc player or DVD player HDMI control function supported with HDMI you can also control those devices with the HDMI control function For details refer to the manual supplied with each device We suggest that you use products TV Blu ray disc DVD player etc from the same manufacturer The HDMI control compatible components include Panasonic VIERA Link compatible TV DVD player recorder and Blu ray disc player To use this function you need to set HDMI control function and register the HDMI components to the TV EA For some HDMI components you only need to set the HDMI control function Registering HDMI components to TV is not required in this case Setting the HDMI control function 1 Turn on all devices connected to this unit with HDMI 2 Enable the HDMI control function on each device For this unit set HDMI CONTROL to ON page 39 For external devices refer to the manual supplied with each device 3 Turn off the TV and then turn on it again 1 2 Select this unit as the input source of the TV Turn on the HDMI control device Blu ray disc or DVD player connected to this unit Select the HDMI control device Bl
11. Configuring settings for each input source Option menu You can configure various settings for each input source TV AUX1 2 HDMII 4 iPod FM and SIRIUS Available menu items vary depending on the selected input source 1 Press DInput selector keys to select the desired input source 2 Press DOPTION The first item of the option menu for the selected input source appears on the front panel display 3 Press A to select the desired menu item and then press OENTER 4 Press 4 to select the desired setting and then press OENTER 5 To exit from the menu press OPTION Option menu items The following menu items are provided for each input source Input Menu items source HDMII 4 Volume Decoder Trim Mode TV Volume Decoder Trim Mode AUXI 2 Volume Decoder Trim Mode FM Volume FM Auto Clear Trim Mode Preset Preset SIRIUS Volume Clear Parental Trim Preset Lock iPod Volume Trim Details of the menu items are as follows The configuration will be reflected to the input source currently selected 127 The initial settings are marked with Volume Trim Volume trim Use to reduce any change in volume when switching input sources by correcting volume differences between input sources Adjustable range 6 0dB to 6 0dB in 0 5 dB steps Initial setting 0 0dB Decoder Mode Decoder mode Use to select DTS digit
12. Playing back iPod iPhone Power key Ffront panel Power key Remote control 2 2220 9 Power 6 Power on by remote control input keys ADVANCED SETUP PRE OUT jacks PRE OUT Volume Sound output 38 PRE OUT volume Sound output Preset tuning FM tuning E R R INPUT POWER ADVANCED SETUP 41 Rack using installation Rear panel Wireless indicators Registering SIRIUS Satellite Radio channels Remote control Remote control code list Remote control code resetting all Remote control code setting Remote control preparation Remote control sensor Remote control troubleshooting Resetting all remote control code Resolution input signal information RETURN key controlling external component RETURN key Remote control aaa 9 RS 232C terminal trate istas 8 E 5 Sampling frequency input signal information Satellite radio listening SIRIUS Satellite Radio Saving settings Sci Fi CINEMA DSP program SET MENU SET MENU operation Setting Loading SETTING PARAMETERS MANUAL SETUP Setting parameters MANUAL SETUP Setting remote control code Setting SAVING Setting the Parental Lock SIRIUS Satellite Radio 29 SETUP key Remote c
13. Without adjustment 2 Adjust the image location for the front right channel RIGHT The higher the percentage the louder the output from the center With the front right Without adjustment channel adjusted SOUND SET MENU TONE CONTROL Tone control SET MENU SOUND SET MENU gt TONE CONTROL Use to adjust the tonal quality of sound beams TREBLE Treble Use to adjust the high frequency response Choices 10 0 dB to 10 0 dB Initial setting 0 0 dB BASS Bass Use to adjust the low frequency response Choices 10 0 dB to 10 0 dB Initial setting 0 0 dB SUBWOOFER SET Subwoofer settings SET MENU SOUND SET MENU SUBWOOFER SET Use to configure the subwoofer settings BASS OUT Bass out Select where to output low frequency effect LFE and low frequency bass signals Choices SUBWOOFER FRONT OR AUTO Select SUBWOOFER if you connect a subwoofer with a subwoofer cable LFE and low frequency signals from other channels are directed to the subwoofer Select FRONT OR AUTO if you do not use a subwoofer or connect a subwoofer by wireless LFE and low frequency signals from other channels are directed to the front right and left channels when you do not use a subwoofer They are directed to the subwoofer automatically when a wireless connection between a subwoofer and this unit is established properly If the wireless connection is cut off they are directed to the fron
14. high Choices On Off Select On to enable the adaptive dynamic range control Select Off to disable the adaptive dynamic range control a Dolby DTS DRC is automatically set to Max when is selected This setting is automatically set to Off when the UniVolume function is turned on while this setting is automatically set to On when the UniVolume function is turned off Dolby DTS DRC Dynamic range of Dolby Digital and DTS signals Select the amount of dynamic range applied when this unit is decoding Dolby Digital and DTS signals Choices Max Maximum Standard Min Auto Minimum Auto Select Max to output sound without adjusting the dynamic range of the input signals Select Standard to set the standard dynamic range recommended for regular home use Select Min Auto to set the dynamic range suitable for low volume or a quiet environment such as at night for bitstream signals except for Dolby TrueHD signals Min or adjust the dynamic range for Dolby TrueHD signals based on input signal information Auto als a Adaptive DRC is automatically set to when the settings other than Max is selected BASS EXTENSION Bass extension SET MENU SOUND SET MENU BASS EXTENSION Use to turn on or off the bass sound extension When this function is enabled the BASS EXT indicator lights up on the front panel display page 7
15. 00601 01501 01701 01801 KARCHER 07701 14701 14801 14801 01201 02601 02701 02201 02601 03001 5701 16201 MAGNAFON 0680 05601 07101 11801 04501 06101 06901 KATHREIN 07001 15701 16201 MAGNASONIC 14701 14801 15401 12201 12601 15801 07301 11701 12101 KAWASHO 16301 17901 MAGNAVOX 00301 00801 12001 16301 16401 16601 14701 15401 15701 KEC 02701 12601 14701 15701 17301 17401 17901 15801 16101 16201 KENDO 00401 14701 14801 16201 16301 17201 18401 18701 19001 16301 17701 17901 15001 15701 16201 17801 1790 19101 18601 1890 KENNEDY 15001 MAGNUM 15701 16201 GEC 00401 06801 15701 HORIZONT 14701 KENWOOD 00301 15401 16301 MAJESTIC 18401 18601 18701 16101 1620 HORNYPHON 14701 17901 MANESTH 03701 04101 14701 GELOSO 00101 14801 15901 HORNYPHONE KIOTA 14801 15701 1620 GEMSOUND 14801 15701 1620 KITION 16201 MANHATTAN 15701 16201 GENERAL 14801 HUA TUN 00101 KITON 15701 MARANTZ 00301 00401 00801 GENERAL ELECTRIC HUANYU 04901 1590 KLH 15401 07001 14701 15701 15801 HYPER 14801 1550 KNEISSEL 03501 05401 15301 16201 16301 17901 GENERAL TECHNIC HYPSON 00401 03701 14701 5701 15901 16201 MARK 00401 14701 15701 14801 14801 15701 16201 KOBIC 14801 15901 1620 GENEXXA 02201 14701 15701 IBERIA 15701 1620 KOLIN 00701 01601 02701 MASUDA 15701 16201 16201 ICE 03701 04801 14701 KOLSTER 14701 15701 16101 MATSUI 00101 00401 02901 GIBRALTER 00201 00301 16301 14801 15701 162
16. 06402 06102 LUXOR 00802 01102 01602 ROADSTAR 05905 AMSTRAD 00002 04702 FUJI 00202 00302 06402 04902 ROTEL 01305 ANAM 00402 01902 02002 FUJITSU 00002 00902 LXI 00402 05702 05902 SABA 06005 02102 02902 FUNAI 00002 04702 05902 M ELECTRONIC SAMSUNG 01105 04505 ANAM NATIONAL 06302 00002 04702 SANYO 02005 01902 04502 GARRARD 00002 06302 MAGNASONIC SCHNEIDER 06005 ANITECH 01402 GE 00302 01202 02002 04302 SCOTT 05805 06005 ASA 00402 01502 03502 03702 03802 MAGNAVOX 00002 00302 00502 SEARS 07805 ASHA 02002 05502 05502 05602 06402 01502 05602 05902 SHANGHAI 05805 ASUKA 00402 GEC 01502 06402 SHARP 01405 AUDIO DYNAMICS GENERAL 00902 MAGNIN 02002 05502 3 SHERWOOD 03205 05402 05802 06002 GO VIDEO 02802 00902 01402 m SHINCO 08705 AUDIOVOX 00402 02102 05702 GOLDHAND 01402 MARANTZ 00302 01502 04602 2 SHINSONIC 00505 08705 BAIRD 00002 00602 01602 GOLDSTAR 00402 01802 02902 05402 05802 06002 2 SINGER 05905 04902 04202 05402 05702 06102 06402 gt SKYMASTER 05605 BASIC LINE 01402 02102 05902 MARTA 00402 05702 SLIM ART 03305 BEAUMARK 02002 05502 GOODMANS 00002 00402 01402 MATSUI 02602 02702 05002 SM ELECTRONIC BELL amp HOWELL 02102 04702 MATSUSHITA 00302 06402 02805 01602 06102 GO VIDEO 05502 MEDION 02602 SM ELECTRONICS BLAUPUNKT 01902 04602 04802 GRADIENTE 00002 06302 MEI 00302 06402 05605 05905 05102 05302 GRAETZ 00602 01602 02002 MEMOREX 00002 00302 004
17. 15201 15401 15701 16201 16301 16501 16601 16701 17901 18101 18901 20301 SAMSUX SAMTRON SANKY SANSEI SANSUI SANYO SAVE SBR SCEPTRE 15401 17901 16701 15401 05601 05801 14701 14801 15401 15701 16201 16801 01401 02001 02701 02901 04301 10201 14801 15301 15701 16201 16301 18901 15701 16201 00401 14701 15701 16201 20201 SCHAUB LORENZ SCHNEIDER SCOTCH SCOTT SEARS SEG SEI 04601 15901 16101 00401 03301 04801 08501 14701 14801 15001 15301 15501 15601 15701 15801 16101 16201 02601 16301 17901 02601 02701 03101 15401 16301 17901 00501 00801 02001 02101 02501 02601 6301 16601 16701 7201 17401 17901 18101 18201 18401 18701 18901 03701 08501 14801 5401 15701 16101 16201 06801 15701 16101 6201 SEI SINUDYNE SELECO SEMIVOX SEMP SEMUA SENCORA SENTRA SHARP SHEN YING SHENG CHIA SHINTOSHI SHIVAKI SHOGUN SHOW SIAREM SIEMENS SIERA SIERRA SIGNATURE SILMA SILVA SILVER SIMPSON SINGER SINUDYNE SKANTIC SKY SKYGIANT SKYWORTH SNYDER SOLAVOX SONIKO SONITRON SONNECLAIR SONOKO SONOLOR SONTEC SONY 14701 15701 16201 02201 03501 15001 15301 02701 02101 15401 14801 16101 00301 01301 08301 15401 16301 17901 00101 01201 00101 01301 03101 15701 16201 14701 15701 15901 16201 16301 14801 06801 00401 02801 14701 15401 15701 162
18. 18401 18601 8701 19101 WATSON 00401 04101 14701 4801 15701 16201 WATT RADIO 16101 WAYCON 02101 WEGA 15701 16201 WEGAVOX 14701 14801 15701 6201 WELTBLICK 14701 15701 16201 WESTON 15701 16201 WHARFEDALE 5701 16201 WHITE WESTINGHOUSE 00401 04101 05801 07901 14701 15701 6201 17701 WINSTON 14701 14801 WINTERNITZ 14801 WORLDVIEW 14701 14801 XRYPTON 15701 16201 YAMAHA 00301 01801 08301 10001 11001 13501 13601 13701 13801 14001 14101 14201 16301 16501 17901 03609 YAMISHI 15701 16201 YAPSHE 03401 YOKAN 15701 16201 YOKO 00401 03701 14701 14801 15701 16201 YORK 14701 ZENITH 00201 01201 02601 05801 14701 16301 16801 17701 17901 18601 19301 DVD PLAYER ACOUSTIC SOLUTIONS 02805 05605 AIWA 05605 05705 07105 AKAI 07505 ALBA 02605 AMSTRAD 02305 APEX 07605 08705 APEX DIGITAL 02105 02605 03005 03505 03605 03705 04105 05805 AUDIOVOX 08805 AXION 08805 BBK 06105 06205 06305 06405 06505 06605 06705 06805 06905 07005 VIDEOTECHNIC BLAUPINKT 02605 BLAUPUNKT 08705 BLUE PARADE 01005 BLUE SKY 05805 BRANDT 06005 BUSH 02305 CENTREX 02105 CENTRIOS 08805 CINEVISION 07405 CLASSIC 05605 CLATRONIC 03405 COBY 07305 05905 07605 07905 08005 08105 08305 08505 CONCEPT 08705 CONIA 05805 CROWN 06005 CURTIS INTERNATIONAL 08505 CYBERHOME 02405 CYTRON 06005 DAEWOO 03205 03305 DANSAI 03205 DECCA 03205 DENON 00005
19. DIAMOND 03105 06005 DIGITREX 02105 07605 Digitrex 05805 DISNEY 08405 DUAL 05605 06005 DURABRAND 07405 DVD2000 00205 ELTA 05905 07205 07505 EMERSON 01205 07405 07805 08405 08605 ENTERPRISE 01205 FERGUSON 06005 FISHER 02005 FUNAI 07805 08405 GE 00305 02605 08705 GO VIDEO 02505 GOLDSTAR 02905 07405 GOODMANS 05905 06005 GRADIENTE 01805 GREENHILL 02605 08705 GRUNDIG 00705 06005 HARMAN KARDON 08205 HARMAN KARDON 05505 HELIOS 09205 HITACHI 01105 01905 HITEKER 02105 05805 07605 INITIAL 08705 INSIGNIA 07405 07705 07805 08705 08805 JBL 08205 JVC 00905 01305 KENWOOD 00005 00605 KLH 02605 08705 KONKA 07705 KOSS 01805 KXD 07305 LENCO 06005 LENOXX 05905 07505 LG 02905 07405 LIFETEC 06005 LIMIT 03105 LIQUIDVIDEO 08805 MAGNAVOX 00105 02205 07805 MARANTZ 00705 07405 MATSUI 06005 MBO 05905 MEDION 06005 MEMOREX 03805 MICO 02705 MICROSOFT 00305 MINTEK 02605 08705 MITSUBISHI 00205 MUSTEK 02805 05605 Mx ONDA 06005 NAD 07405 NESA 02605 08705 NORCENT 08005 08505 ONKYO 00105 OPPO 08905 09005 09105 ORITRON 01805 06005 PALSONIC 02105 05805 PANASONIC 00005 01605 04205 PHILIPS 00105 00705 01705 03905 07805 08405 PIONEER 00405 01005 01505 01605 POLK AUDIO 00705 PORTLAND 07505 PROLINE 06005 PROSCAN 00305 PROSONIC 08005 QWESTAR 01805 RCA 00305 01005 02605 02102 01402 LOEWE OPTA 04602 08705 AMERICAN HIGH FISHER 01002 01602 05402 LOGIK 01402 02002 z RIO 07405 00302
20. On screen display does not The cable is not connected to the TV or this unit Connect the cable properly 12 appear properly The HDMI control function does HDMI CONTROL is set to OFF in SET Set HDMI CONTROL to ON in SET MENU 39 not work properly MENU The HDMI control function is disabled on your TV Refer to the owner s manual supplied with your TV and check the setting The number of the connected HDMI components is Disconnect some of the HDMI components over the limit The automatic lipsync is not The TV does not support the automatic lipsync Set AUTO LIP SYNC to OFF and then manually 36 effective even AUTO LIP SYNC is adjust the audio output delay set to ON Not Available appears on the The key is unable to function in the current condition front panel display after key operation FM tuner Problem Cause Remedy ee page FM stereo reception is noisy The characteristics of FM stereo broadcasts may Check the antenna connections 14 cause this problem when the transmitter is too far away or the antenna input is poor Try using a high quality directional FM antenna Use the manual tuning method 25 There is distortion and clear There is multi path interference Adjust the antenna position to eliminate multi path I reception cannot be obtained even interference with a good FM antenna The desired station cannot be The signal is too weak Use a high quality directi
21. YAMAHA YSP 5100 YSP 4100 Digital Sound Projector Owner s Manual English for North America 2 En Inte liBeam The IntelliBeam logo and IntelliBeam are trademarks of Yamaha Corporation CINEMA DS P The logo and Cinema DSP are registered trademarks of Yamaha Corporation UniVolume The WuiWolume and UniVolume are trademarks of Yamaha Corporation yA red The y AG re d and yAired are trademarks of Yamaha Corporation I DOLBY TRUEDE Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories S 4 Master Audio Manufactured under license under U S Patent No s 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535 amp other U S and worldwide patents issued amp pending DTS is a registered trademark and the DTS logos Symbol DTS HD and DTS HD Master Audio are trademark of DTS Inc 1996 2007 DTS Inc All Rights Reserved Manufactured under license from Cambridge Mechatronics Ltd Worldwide patents applied for The 12 Cambridge Mechatronics Ltd logo and Digital Sound Projector are trademarks of Homi HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC x v Color x v Color is a trademark iPod iPhone iPod is a
22. component The HDMI components connected to this Connect the HDMI components that support 12 unit do not support the HDCP copy the HDCP copy protection standards protection standards SUPPORT AUDIO is set to OTHER Set SUPPORT AUDIO to this unit in 39 and HDMI audio signals are not being SET MENU played back on this unit No sound or too small The output level of the channel is muted Raise the output level of the channel 37 sound from a specific channel The beam setting is inappropriate Adjust the beam setting 35 You play back the source in the stereo mode Start surround playback 22 Some audio output methods do not output Select another beam mode 23 sound beams for certain channels No sound from the BASS OUT is set to FRONT OR Set BASS OUT to SUBWOOFER in 36 subwoofer AUTO in SUBWOOFER SET SUBWOOFER SET The source does not contain low bass signals No sound from the The group IDs of this unit and SWK W10 Check whether the group IDs of this unit 39 subwoofer connected by are not set to the same value and SWK W 10 are set to the same value wireless Wireless Function is set to No Set Wireless Function to Yes 39 Distorted or too little bass CROSS OVER is set incorrectly in Set CROSS OVER correctly in 36 sound SUBWOOFER SET SUBWOOFER SET NOILONGOULNI NOILVHVd3Hd S34N1V31 MOVEAV 1d Customizing this
23. disconnect the AC power plug from the wall outlet power outage etc To enable the function select AC STANDBY ON Choices AC STANDBY OFF AC STANDBY ON SIRIUS PIN SIRIUS Satellite Radio PIN Reset the Parental Lock cord for SIRIUS Satellite Radio Choices CANCEL RESET MEMORY PROTECT Memory protect Protect the settings you have saved in the system memory To protect the settings select PROTECT ON Choices PROTECT OFF PROTECT ON Using an external amplifier DEMO MODE Demo mode Test the sound beam output from this unit to experience the sound beam To set this unit to the demo mode select BEAM DEMO ON Choices BEAM DEMO OFF BEAM DEMO ON To move the beam horizontally turn off this unit and then turn on it again DEMO appears on the front panel display Playback an input source and then press OFF To stop the beam movement press OFF again To adjust the beam angle manually press SURROUND or STEREO when the beam is not moving After you checked the sound beam output set this setting to BEAM DEMO OFF If you set SOUND OUT to PRE OUT DEMO MODE does not function FACTORY PRESET Factory preset Reset all of the parameters of this unit to the factory presets Choices CANCEL RESET You can connect an external amplifier to the PRE OUT jacks Set SOUND OUT page 37 to PRE OUT and then configure PRE
24. 15001 15701 16201 ELBIT 14701 ELECS 14701 ELECTRATUNE 15401 ELECTRO TECH 14801 ELECTROBAND 00001 ELECTROHOME 15401 16301 17901 19001 ELECTRONIKA 14701 ELEKTA 14801 15701 16201 ELEKTRA 18601 ELEKTRONIKA 14701 ELG 15701 16201 ELIN 00401 06901 14701 14801 15701 16101 16201 ELITE 04101 14701 15401 15701 16201 ELTA 00101 14801 14901 EMERSON 02001 02601 02701 03101 04601 05801 07901 15401 15701 16201 16301 16801 17201 17701 17901 18201 18501 19301 ENVISION 00301 10601 16301 17901 EPSON 11001 ERRES 00401 14701 15701 16201 ESC 15701 16201 ETHER 00101 00301 ETRON 00101 14801 15701 16201 EUROMAN 15701 16201 EUROMANN 14701 EUROPA 15701 16201 EUROPHON 06801 14701 15701 16201 EXCEL 15701 16201 EXQUISIT 15701 16201 FAMILY LIFE 15701 16201 FENNER 14801 15901 FERGUSON 00401 01001 01701 03201 03801 04201 07101 15701 15801 16201 FIDELIS 14801 FIDELITY 04601 15701 16201 FILSAI 14801 FINLANDIA 02901 04401 15801 FINLUX 00401 01401 01501 04401 06801 14701 14801 15101 15701 16201 FIRST LINE 14701 14801 15701 15901 16101 16201 FIRSTAR 00101 03101 FIRSTLINE 00101 03301 08501 FISHER 01401 02001 02901 04701 16101 18901 FLINT 05701 14701 15701 16201 FORMENTI 00401 04101 14701 15701 16201 49 En NOILONGOHINI NOILVHVd3Hd s3univ3ad MOVEAV 1d SONILLAS XIGNAddV FORTRESS 01301 15401 HARRAD 15401 18701 18901 190
25. 16001 04601 05901 06001 06901 08101 14801 15901 16101 1470 09301 10801 NORDMENDE 01701 03801 07101 NORMEREL NOVABEAM NOVATRONIC NTC O GENERAL OCEANIC OKANO OLEVIA OLYMPIC ONCEAS ONWA OPERA OPTIMUS OPTONICA ORBIT ORIENT ORION ORLINE ORMOND OSAKI OSIO OSUME OTF OTTO VERSAND00401 04101 06701 15701 15801 16001 16201 15701 16201 14701 14701 14801 15701 15901 16201 01201 14801 02201 04601 14801 15701 16201 19701 19801 19901 20001 14801 14801 02701 05301 14701 15701 16201 02001 02301 03401 08301 01301 14701 15701 16201 14801 00401 03101 04101 05801 06801 14701 14801 15401 15701 16201 16801 15701 16201 15701 16201 03701 05101 15701 15901 16201 15701 16201 15701 16201 14801 07001 14701 14801 14901 15501 15601 15701 15801 16101 OTTO VERSAND 14701 14801 14901 PACIFIC 15701 16201 PAEL 15101 PALLADIUM 04701 05201 14701 15701 16101 16201 PALSONIC 15701 16201 PANAMA 03701 14801 15701 1620 PANASHIBA 14801 PANASONIC 00401 00601 00801 02201 03401 08301 12401 14701 15701 16201 16401 PANAVISION 15701 16201 PANAVOX 14801 PANORAMA 14801 PATHE CINEMA03201 04101 15301 16101 PATHE MARCONI16001 PAUSA 00101 14801 PCE PEC 1540 PENNEY 00301 00501 00601 00901 02101 02601 12201 15401 PERDIO 04101 15701 16201 PERFEKT 14701 15701 16201 PHILCO 00301 004
26. HD Master Audio also remains fully compatible with the existing multichannel audio systems that incorporate DTS Digital Surround B HDMI HDMI High Definition Multimedia Interface is the first industry supported uncompressed all digital audio video interface Providing an interface between any source such as a set top box or AV receiver and an audio video monitor such as a digital television HDMI supports standard enhanced or high definition video as well as multi channel digital audio using a single cable HDMI transmits all ATSC HDTV standards and supports 8 channel digital audio with bandwidth to spare to accommodate future enhancements and requirements When used in combination with HDCP High bandwidth Digital Content Protection HDMI provides a secure audio video interface that meets the security requirements of content providers and system operators For further information on HDMI visit the HDMI website at http www hdmi org LFE 0 1 channel This channel is for the reproduction of low bass signals The frequency range for this channel is 20 Hz to 120 Hz This channel is counted as 0 1 because it only enforces a low frequency range compared to the full range reproduction by the other 5 6 channels in Dolby Digital or DTS 5 1 6 1 channel systems PCM Linear PCM Linear PCM is a signal format under which an analog audio signal is digitized recorded and transmitted without using any compression This is
27. HDMI TV Adjust the audio output delay applied to signals input from the TV jacks Control range 0 msec to 400 msec HDMI Manually adjust the audio output delay applied to signals input from the HDMI IN jacks This setting is effective only when AUTO LIP SYNC is set to OFF Control range 0 msec to 400 msec Initial setting 30msec AUX1 2 Adjust the audio output delay applied to signals input from the AUX1 2 jacks Control range 0 msec to 400 msec Initial setting 30msec DRC Dynamic Range Control Dynamic range control SET MENU SOUND SET MENU DRC Dynamic Range Control Use to adjust the dynamic range compression Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion Adaptive DRC Adaptive dynamic range control Select whether to automatically adjust the dynamic range in conjunction with the volume level When this function is enabled the dynamic range is adjusted as follows When the volume level is low Narrow the dynamic range Loud sound is played back softer and soft sound which is hard to be listened to is played back louder When the volume level is high Widen the dynamic range From soft sound to loud sound source sound is played back without adjusting volume 8 8 6 of 6 Off Input level Input level Volume low Volume
28. PCM multi channel PCM iB p DVD video Dolby Digital DTS 2 channel PCM multi channel PCM DVD audio 2 channel PCM multi channel PCM Q Optical cable supplied wW This unit automatically converts input video signals and outputs the signals i i from the HDMI OUT jack The HDMI of this unit supports High Bandwidth Digital Content Protection 22 22 HDCP 3 Digital audio pin cable supplied We recommend that you use an HDMI cable shorter than 5 m 16 ft with the HDMI logo printed on it Priority order for audio input signals For video When digital and analog audio signals are simultaneously input from a single source component this unit plays back digital audio signals by priority For example if audio signals are input to the DIGITAL IN AUX 1 and AUDIO IN AUX 1 jacks simultaneously this unit ET plays back audio signals input to the DIGITAL IN AUX 1 jack when AUX1 is selected as the input source Connecting external components Connect external components TV Blu ray disc player etc to this unit Do not plug the power supply cable into an AC wall outlet until all connections are complete a Video pin cable supplied Connecting your TV and Blu ray disc player The following connection example shows a way to connect your TV and Blu ray disc player by using the HDMI jacks When you connect them by using the other jacks refer to Connecting audio and video components page 13
29. There are three modes available Music mode for music sources Movie mode for movie sources for 2 channel sources only and Game mode for game sources B Dolby Surround Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects 2 front left and right channels stereo a center channel for dialog monaural and a surround channel for special sound effects monaural The surround channel reproduces sound within a narrow frequency range Dolby Surround is widely used with nearly all video tapes and laser discs and in many TV and cable broadcasts as well The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality B Dolby TrueHD Dolby TrueHD is an advanced lossless audio technology developed for high definition disc based media including Blu ray Disc Selected as an optional audio standard for Blu ray Disc this technology delivers sound that is bit for bit identical to the studio master offering a high definition home theater experience Supporting bitrates up to 18 0 Mbps Dolby TrueHD can carry up to 8 discrete channels of 24 bit 96 kHz audio simultaneously Dolby TrueHD also remains fully compatible with the existing multichannel audio systems and retains the metadata capability of Dolby Digital allowing dialog normalization and dynamic rang
30. Volume level indicator Volume Trim option menu Volume trim option menu wall mount bracket using installation 10 Wireless Function Wireless setup Wireless function Wireless setup Wireless indicators t 7 WIRELESS SETUP INPUT MENU Wireless setup INPUT MENU m x KV COOL glossary eerte 48 57 En NOILONGOULNI S3d nl1V3a33 MOVEAV 1d SONILLAS XIGNAddV YAMAHA YAMAHA CORPORATION 2009 Yamaha Corporation All rights reserved H YC174B0 OMEN1
31. and then save the settings to MEMORY2 Saving settings 5 Press ENTER The current beam and sound settings are saved to the selected memory number 1 Press OSETUP MEMORY MEMORY Saving ITO 5 3 MANDAL SETUP SOUND SET ME SOUND SE H UND OUT MEN DISPLAY LaCie Wee Dour LEHTER1 Enter 2 Press ENTER Loading settings 1 Press OSETUP a MEMORY AUTO SETUP CF Dour El Enter I DOSS 1 3 Press lt to select SAVE and then press N a MEMORY b MEMOREZ cOMEMORYS Ur Doun CENTER Enter lee CENTER 1 Enter 4 Press A to select the desired memory number and then press ENTER 3 Press GENTER again ORV Save ap MEMORY MEMDRVI Save How BEA EOMEMORVS LEHTER1 Enter 55 1 ENTER Enter als 22 If system settings already stored the selected memory number this unit overwrites the old settings Changing OSD language AUTO SETUP IntelliBeam Using the system memory 19 En NOILONGOYULNI s3univ3ad MOVEAV 1d SONILLAS XIGNAddV YAMAHA DAUX1 2 HDMI1 DHDMI1 4 lnput selector keys OTV ENTER QS OMUTE VOLUME 20 En 4 Press 7 to select the memory number to be loaded and then press ENTER
32. beam output To fine adjust parameters configured by AUTO SETUP use BEAM ADJUSTMENT and IMAGE LOCATION SETTING PARAMETERS Setting parameters SET MENU MANUAL SETUP gt SETTING PARAMETERS Use to set the position of this unit in your listening room and the distance of this unit from the listening position If you make adjustments SETTING PARAMETERS the BEAM ADJUSTMENT parameters are automatically adjusted If you make adjustments in SETTING PARAMETERS the beam optimization settings made in the AUTO SETUP procedure will be lost In SETTING PARAMETERS 1 3 configure INSTALLED POSITION Select the installed position of this unit Choices FLAT TO WALL parallel to wall ANGLE TO WALL OR CORNER angle to wall or corner ANGLE TO WALL OR FLAT TO WALL CORNER If you change this setting BEAM MODE setting changes automatically page 23 Configure INSTALLED HEIGHT Specify the installed height of this unit Control range 0 0 m to 3 0 m 0 0 ft to 10 0 ft Initial setting 1 0 m 3 5 ft 0 0 to 3 0 m 0 0 ft to 10 0 ft Press 57 to proceed to the next page In SETTING PARAMETERS 2 3 configure the listening room settings Specify the length and width of the listening room Control range 2 0 m to 12 0 m 6 5 ft to 40 0 ft When this unit is installed parallel to wall specify the width
33. being input dts C c 8 When DTS HD High Resolution 5 1 channe signals are being input dits HD HI RES When DTS digital signals are RJ being input dts 6 1 channel When DTS 96 24 signals are being input dits When DTS ES discrete is ES DSCRT 7 1 channel selected as the surround decoder dts Ext Les Extra EX1 EX2 indicators light up when 7 1 channnel signals recorded in a Blu lay disc etc are being input Normally surround back channel signals are recorded in the extra channels This may vary depending on the disc Playback mode You can select the playback method surround or stereo desired CINEMA DSP program and decoder to enjoy playback of the input source Selecting surround or stereo playback Use to select the playback method surround or stereo See also Enjoying CINEMA DSP programs page 22 Changing the audio output method for surround playback page 23 Press SURROUND or STEREO You can enjoy high realistic sensation with surround playback and hi fi sound with stereo playback als q Normal sounds not sound beams are output from the front right and front left channels When you play back multi channel sources all signals except those from the front right and left channels are mixed down and output from the front right and left channels When the stereo playback is selected CINEMA DSP page 22 and the decoder page 24 become in
34. channel by category see Category Search mode on this page To select the desired channel directly by entering the channel number see Direct number access on this page To select a channel from the preset channels see Calling a preset channel Preset Search mode page 28 als 22 You can display the SIRIUS Satellite Radio information on the front panel display page 30 You can set the SIRIUS Satellite Radio preset channels page 28 All Channel Search mode Press TUNING A v repeatedly to search for a channel within all channels SIRIUS Channel number Channel name als gt q You can search for a channel quickly by holding down TUNING V You can skip channels to the previous or next category by pressing CATEGORY ZA V Playback Playback mode SIRIUS Satellite Radio tuning Playing back iPod Useful features 27 En NOILONGOHINI NOILVHVdHHd EE f E ED Do z P AAT SONILLAS XIGNAddV QO CG Que Wore mee STEREO YAMAHA Q A S d D OPTION RETURN Numeric keys ENT BCATEGORY A MEMORY OPRESET TUNING 28 En Category Search mode 1 Press CATEGORY A lt 7 repeatedly to select the channel category The CATEGORY indicator lights up on the front panel display
35. jack is assigned Choices AUX2 HDMII HDMD HDMI3 HDMM AUXI The input already selected in OPTICAL or OPTICAL2 is not displayed To set the input selected in one of these parameters change the corresponding parameter and then reconfigure B INPUT RENAME Input rename SET MENU INPUT MENU INPUT RENAME Use to change the name of the input source displayed when the input source is selected Select a name from templates or enter an original name Selecting a name from templates 1 Press A lt to select the input source to be renamed 2 Press P to select a input source name Choices TV Blu ray DVD HDDVD STB Satelite Game 3 To exit from the menu press RETURN Entering an original name 1 Press 2 lt to select the input source to be renamed 2 Press ENTER 7 appears above the new name display to indicate the position to be entered 3 Press lt gt to place the _ underscore under the space or the character you want to edit 4 Press A lt to select the desired character D Repeat steps 3 and 4 to edit other characters To complete the setting press JENTER To exit from the menu press ORETURN ale A to Z 0 to 9 a to z and symbols 2 lt gt etc are available for input HDMI SETUP HDMI setup SET MENU INPUT MENU HDMI SETUP Use to configure the settings related to HDMI signals and HDMI contr
36. jacks Choices SUBWOOFER FRONT Select SUBWOOFER to output bass sounds from the subwoofer Select FRONT to output bass sounds from the external front right and left speakers Front SP Size Front speaker size for PRE OUT Select the size of external front speakers Choices Small Large Select Small if the diameter of the front speaker s woofer is smaller than 16 cm Low frequency parts of front right and left channel signals are output from the subwoofer Center SP Size Center speaker size for PRE OUT Select the size of external center speakers Choices None Small Select None if no center speaker is used Center channel signals are mixed into the front right and left speakers Select Small if a center speaker is used Low frequency parts of center channel signals are output from the subwoofer or mixed into the front right and left channel signals if subwoofer is not available PRE OUT Volume PRE OUT volume Adjust the output level of the PRE OUT jacks Control range 30 0 dB to 0 0 dB Initial setting 18 0 dB LFE Level Low frequency effect level for PRE OUT Adjust the low frequency effect output level of the PRE OUT jacks This setting is effective only when this unit decodes Dolby Digital or DTS signals Control range 20 dB to 0 dB INPUT MENU B INPUT ASSIGNMENT Input assignment SET MENU INPUT MENU INPUT ASSIGNMENT Use to change the key assignments of input jacks on thi
37. of the selected input source Depending on external components some or all operations may not work In this case operate the component using the supplied remote control f you operate your TV with the remote control of this unit when the HDMI control function is activated this unit or external component connected to this unit with HDMI works improperly in some cases iy e 1 a 1 Setting remote control codes While holding down CODE SET press lnput selector key to which the remote control code is assigned A Transmission indicator flashes twice Release OCODE SET Press Numeric keys to enter the remote control code page 49 for your external component Each time you press you press the key A Transmission indicator flashes once Once the 5 digit remote control code is entered properly S Transmission indicator lights up for approximately 2 seconds To clear remote control code set to a selected input source enter 00010 If any key other than Numeric keys is pressed A Transmission indicator flashes 5 times and the setting mode is canceled Perform a test operation using the remote control of this unit If the external component functions correctly the remote control code setup is successful If it does not function correctly the remote control code may be incorrect Check the remote control code for your external component page 49 and try again f no operation is performed
38. to adjust the brightness of the front panel display when you operate this unit Choices 2 1 OFF AUTO DIMMER Auto dimmer Use to adjust the brightness of the front panel display when you do not operate this unit The front panel display automatically dims or turns off according to this setting if no operation is performed for a specified period of time Choices DISPLAY OFF 3 to 1 OFF Select OFF for the same brightness as STANDARD DIMMER Select 3 to 1 to get dimmer based on STANDARD DIMMER Select DISPLAY OFF to turn off the front panel display NOILONGOHINI NOILVHVdHHd SAYNLVAA MOVEAV ld Customizing this unit SET MENU System configurations ADVANCED SETUP Using an external amplifier Controlling external components XIGNAddV 39 En 886 TVVOL CH VOLUME HE eu WOLUNE SUR 20000 8 0 YAMAHA STEREO SURROUND ENTER 2 4 ORETURN OSETUP 40 En OSD SETUP OSD setup SET MENU DISPLAY MENU OSD SETUP Use to adjust the display position and select the background color of the OSD OSD SHIFT OSD shift Use to adjust the vertical position of the OSD Adjust toward the minus direction to raise the position of the OSD and adjust toward the plus direction to lower it Choices 5 to 5 Initial settin
39. top menu of a Blu ray disc or DVD page 42 amp MENU Displays the menu of a Blu ray disc or DVD page 42 D OPTION Displays the option menu page 32 The remote control turns to setting mode DSETUP lights up SETUP Displays the SETUP menu page 33 Press and hold to directly enter the LANGUAGE SETUP menu page 15 Lights up when the remote control is turned into the setting mode of the main unit D RETURN Returns to the previous menu screen page 34 Q CHA YV Changes the channels of your TV recorder page 42 VOLUME Increases or decreases the volume level of this unit page 21 MUTE Mutes the sound page 21 TV operation keys Use to control your TV page 42 UNIVOLUME Turns on or off the UniVolume function page 31 SUR DECODE Selects a decoder for surround playback page 24 The remote control turns to setting mode OSETUP lights up INTELLIBEAM Enters the AUTO SETUP menu page 16 The remote control turns to setting mode OSETUP lights up Numeric keys Use to enter numbers 9 CODE SET Sets remote control codes for external component operations page 42 P Tuner external component operation keys Use to select or preset an FM station or Sirius Satellite Radio channel or control playback of your external components pages 25 26 and 42 SLEEP Sets the sleep timer page 31 INFO Displays information about signals currently input to this u
40. trademark of Apple Inc registered in the U S and other countries iPhone is a trademark of Apple Inc Made for Works with Pod iPhone Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards SIRIUS READY SIRIUS XM and all related marks and logos are trademarks of Sirius XM Radio Inc and its subsidiaries All rights reserved Service not available in Alaska and Hawaii About this manual supplied owner s manual for each component lt indicates a tip for your operation Make sure you read precautions in Safety and Accessory Information separate booklet carefully before using this unit This manual describes how to connect and operate this unit For details regarding the operation of external components refer to the Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified Anillustration of the remote control in the left pages of this manual indicates the keys to be used in two facing left and right pages This m
41. unit SET MENU System configurations ADVANCED SETUP Using an external amplifier Controlling external components XIGNAddV 43 En See wall outlet the AC wall outlet Problem Cause Remedy page Surround sound effects are The listening room is not a regular shape Install this unit in a square or rectangular shaped insubstantial room There is no wall in the path of the sound beam Try placing a flat object such as a board in the path of the sound beam Digital audio signals cannot be The playback component is connected to this unit Connect them with an HDMI connection or a digital 12 played back DIGITAL indicator with an analog connection connection does not light up in the front panel display The external component is not set to output digital Refer to the owner s manual supplied with your audio signals component and check the setting Bit streaming is disabled on the external component Refer to the owner s manual supplied with your component and check the setting There is noise interference when The protection circuitry was in operation because Turn down the volume level 21 subwoofer is not connected to this source with strong bass elements was played back unit Set BASS OUT to SUBWOOFER in 36 SUBWOOFER SET Connect a subwoofer and adjust settings for 36 SUBWOOFER SET
42. used as a method of recording CDs and DVD audio The PCM system uses a technique for sampling the size of the analog signal per very small unit of time Standing for pulse code modulation the analog signal is encoded as pulses and then modulated for recording B x v Color A color space standard supported by HDMI version 1 3 It is a more extensive color space than sRGB and allows the expression of colors that could not be expressed before While remaining compatible with the color gamut of sRGB standards x v Color expands the color space and can thus produce more vivid natural images It is particularly effective for still pictures and computer graphics AMP SECTION Maximum Output Power 20 W ch 4 Q 100 Hz 10 THD Small dia speaker 2 Wich 4 1 kHz 10 THD SPEAKER SECTION Speaker type 2 way acoustic suspension magnetic Driver Small dia speakers Woofers 4 em 1 1 2 in cone magnetic shielding type x 40 11 cm 4 1 2 in cone x 2 Tweeters YSP 5100 only 2 5 cm 1 in balanced dome x 2 Frequency response YSP 5100 75 Hz to 20 kHz 10dB Stereo mode YSP 41 00 ene petentis 90 Hz to 20 kHz 10dB Stereo mode CONNECTIONS Input Jacks TV AUX 1 AUDIO IN u tere 2 pairs Analog TV AUX 1 DIGITAL IN FS 32 kHz 44 1 kHz 48 kHz 64 kHz 88 2 kHz 96 kHz
43. volume level of the TV so that it will not increase suddenly when whenever the contents being broadcast change due to commercials etc Various digital audio decoders includes newly added HD audio decoder and sound technologies Dolby TrueHD Dolby Digital Plus Dolby digital Surround EX Dolby Digital Dolby Pro Logic Pro Logic II Pro Logic IIx DTS HD Master Audio DTS HD High Resolution Audio DTS 96 24 DTS ES DTS DTS ES discrete and matrix DTS Neo 6 Music Enhancer to improve the sound quality of compression artifacts such as the MP3 format Bass Extension to produce powerful bass sounds Sophisticated FM tuner 40 station random and direct preset tuning Automatic preset tuning SIRIUS Satellite Radio SIRIUS Satellite Radio tuning capability using SiriusConnect tuner sold separately SIRIUS Satellite Radio information displaying capability Wireless connection yAired Wireless connection with iPod iPhone using Yamaha wireless transmitter for iPod PDX 50TX PDX 50BC Wireless connection with subwoofer using Yamaha wireless subwoofer kit SWK W10 not available in some countries iPod iPhone interlock feature to turn on off this unit or switch the input source in conjunction with iPod iPhone operations Versatile Remote Control The supplied remote control comes with preset remote control codes used to control external components connected to this unit General operation flow 1 Instal
44. 01 00801 01801 02601 02701 03301 05801 13101 14701 14801 15701 16201 16301 16501 17801 17901 PHILIPS 00001 00301 00401 PHILIPS F 1620 00601 00801 01201 01601 02601 04901 07001 08801 12601 15701 15801 15901 16201 16301 17201 17301 17801 18201 1470 PHOENIX 14701 15701 16201 PHONOLA 00401 14701 15701 16201 PILOT 00301 15701 16201 16301 PIONEER 01701 02201 02301 03801 08601 09501 11301 14701 15701 15801 16201 16301 17901 PLANTRON 14701 14801 15701 16201 POLAROID 19201 19501 19601 POPPY 1480 PORTLAND 01201 15401 15901 16301 16501 17901 PRANDONI PRINCE15101 PRANDONI PRINCE06801 PRICE CLUB 16701 PRIMA 09601 14801 15401 17001 17501 PRINCESS 14801 PRINZ 16101 PRISM 00601 16401 PROELCO 14701 PROFEX 00101 04601 14801 14901 PROFITRONIC 14701 15701 16201 PROLINE PROSCAN PROSONIC PROTEC PROTECH PROTECT PROTON PROVISION PULSAR PULSER PYE 15701 16201 00501 16601 17401 18401 18701 15701 15901 16201 14701 14801 00101 00401 03301 03701 05201 08501 15701 16101 16201 00101 00301 02601 14801 15401 16301 17901 18901 15701 16201 00201 16301 14701 14801 15401 14701 15701 15901 16101 16201 PYMI QUASAR QUELLE R LINE RADIALVA 14801 00601 03401 08301 16401 00401 01401 04601 06701 14701 14801 15001 15101 15201 15401 15501 15701 6101 16201 4701
45. 01 15701 16201 14701 18401 18601 18701 19301 14701 14801 15701 16201 15701 16201 17801 14701 14801 15701 16201 06801 14701 15001 15701 16101 16201 04501 00401 15701 16201 02701 00401 14701 02201 15701 16201 15701 16201 02901 15701 16201 00101 00401 14701 14801 15701 16201 02201 02901 00401 14701 15701 16201 00001 08301 11101 11601 12701 12901 15701 16201 SOUND amp VISION 51 En NOILONGOULNI NOILVHVd3Hd s3univ3ad MOVEAV 1d SONILLAS XIGNAddV 15701 15901 16201 SOUNDESIGN 02601 02701 15401 16301 17801 17901 SOUNDMASTER 14801 SOUNDWAVE 00401 05201 15701 16201 SOWA 00601 00901 01201 02101 0260 SPECTRICIAN 14701 15401 SQUAREVIEW 02501 1820 SSS STANDARD STARLITE STARLUX STERN STRATO SUNIC LINE SUNKAI SUNSTAR SUNWOOD SUPERSCAN SUPERTEC SUPERTECH SUPRA SUPREMACY SUPREME SUTRON SYC LINE SYLVANIA SYMPHONIC SYNCO SYNTAX SYSLINE T A TAI YI TANDBERG TANDY TASHIKO TATUNG TCM TEAC TEAK TEC TECH LINE TECHNEMA TECHNICS TECHNILAND 1470 TECHNISAT TECHNOL TECHWOOD TECNISON TECO TEDELEX TEKNANT TEKNIKA TEKON TELEAVIA TELECOR TELEFAC 02701 1630 00101 14801 15701 15901 16201 02701 14801 15701 16201 14801 02201 03501 15001 15301 15701 16201 15701 16201 15701 1620 14801 15701 16201 14701 14801 15701 16201 1720 1480 14801 15
46. 01 LUMA 14701 14801 15001 FRABA 15701 16201 HARVARD 02701 15401 19101 15701 15901 16201 FRIAC 15701 16201 HARWOOD 15701 16201 JCB 00001 LUMATRON 15701 16201 FRONTECH 02201 03301 03701 HAUPPAUGE 15701 16201 JEAN 00101 00601 01201 LUX MAY 14701 15701 16201 14801 16101 HAVERMY 01301 02101 03101 LUXMAN 16301 17901 FUJITSU 08701 10401 15401 HCM 00101 05101 14801 JENSEN 09601 16301 17901 LUXOR 04501 04601 15201 15701 16201 15701 16201 19501 16101 FUJITSU GENERAL HEATHKIT 14701 JETPOINT 14701 LXI 00501 00801 02001 15001 HEDZON 15701 16201 JINLIPU 14801 02101 02601 14701 FUNAI 02501 02701 03701 HELLO KITTY 05601 JMB 15701 15901 16201 16301 16601 17401 14801 15401 17201 HEMMERMANN JULIBEE 16201 17701 17901 18101 17701 18201 16101 JUMBOTRONIC 18401 18701 FUTURE 15701 16201 HIFIVOX 16001 4701 M ELECTRONIC00101 00401 01401 FUTURETECH HIGHLINE 15701 1620 JVC 00701 04801 05801 01501 01701 02201 02701 HILINE 14801 08401 08701 14701 03801 04401 04901 GALAXI 15701 16201 HINARI 00101 00401 14701 8901 06001 14801 GALAXIS 15701 16201 14801 15701 16201 KAISER 14701 M ELECTRONICS 14701 14801 GALERIA 1480 HISAWA 05701 KAISUI 00101 14701 14801 MACYS 1540 GATEWAY 13301 13401 HISENSE 19201 5701 16201 MADISON 15701 16201 GBC 14801 15901 HITACHI 00101 00301 01201 KAPSCH 02201 MAGNADYNE 03301 06801 14701 GE 00301 00501
47. 01 6201 04801 06301 06801 GITEM 14701 ICT 5701 16201 KONICHI 14801 14701 14801 15701 GM 14801 IMA 15401 KONKA 15701 16201 18001 16101 1620 GMG 14801 IMPERIAL 03301 04701 05201 9401 MATSUSHITA 03401 08301 GOLDHAND 14801 4701 15701 16101 KORPEL 00401 14701 15701 MAVA 1540 GOLDSTAR 00301 00401 01701 620 6201 MAXAM 14801 02001 02601 05001 INDIANA 00401 14701 15701 KOSMOS 15701 16201 MAXELL 1480 14701 14801 15201 620 KOYODA 00101 MCE 14801 15401 15501 15701 INFINITY 00801 14701 KTV 00301 02701 15401 MEDIATOR 00401 14701 15701 16201 16301 16501 INGELEN 02201 KUASHO 14701 15401 16201 17701 17901 18901 INGERSOLL 14801 KUBA 16101 MEDION 08501 10301 11401 GOODMANS 00401 04801 04901 INNO HIT 06801 14701 14801 KUBA ELECTRONIC 15701 16201 08201 14701 14801 5201 15701 16201 16101 MEGATRON 01801 02601 16301 15701 15801 15901 INNOHIT 4701 14801 15201 KURAZAI 18601 17901 16201 INNOVA 00401 L amp S ELECTRONIC MELECTRONIC15701 15801 15901 GOREMJE 0470 INNOVATION 15701 16201 10301 16101 16201 GPM 1480 INSIGNIA 6801 17001 17201 LEADER 14801 MEMOREX 00101 01901 02001 GRADIENTE 00701 02401 15701 7501 17601 18001 LECSON 15701 16201 02601 03401 05801 16201 8201 19401 19501 LEGEND 14801 11401 14801 16301 GRADIN 14701 1480 INTEQ 00201 LENCO 14701 14801 15701 16801 17901 18401 GRAETZ 02201 04601 15701 INTERACTIVE 5901 16201 18601 18701 16201 5701 16201 LENOIR 14801 MEMPHIS
48. 02 03902 04002 04602 06402 01502 00402 05702 00702 01302 01502 05802 06002 06202 06702 POLK AUDIO 01502 PROFITRONIC 02002 PROLINE 00002 04702 PROSCAN 01202 03802 05602 PROTEC 01402 PULSAR 00502 PYE 01502 QUARTER 06102 QUARTZ 06102 QUASAR 00302 03702 05602 06402 QUELLE 01502 04602 04802 05002 RADIO SHACK 05502 05602 05702 05902 06102 06302 06402 RADIOLA 01502 RADIOSHACK 00002 RADIX 00402 05702 RANDEX 00402 05702 RCA 00302 00702 01202 02002 03502 03702 03802 05502 05602 05702 06202 06402 06502 REALISTIC 00002 00302 00402 01002 01102 01602 04702 05502 05602 05702 05902 06102 06302 06402 REOC 02602 REPLAYTV 03002 03102 REX 00602 RIO 05702 ROADSTAR 00402 01402 02002 02102 RUNCO 00502 SABA 00602 02402 SAISHO 05002 SALORA 00802 SAMPO 00402 01102 SAMSUNG 00902 02002 02802 05502 06202 SANKY 00502 01102 SANSUI 00002 00602 01302 04402 05802 06002 06602 SANYO 01002 01602 02002 05502 06102 SAVILLE 02702 SBR 01502 SCHAUB LORENZ SCHNEIDER SCOTT SEARS SEG SEI SELECO SEMP SHARP SHINTOM SHOGUN SIEMENS SIGNATURE SILVA SINGER SINUDYNE 54 En 00002 00602 01602 00002 01402 01502 04702 00802 00902 01702 00002 00302 00402 00702 01002 01602 04202 05702 06102 06202 06402 06502 06702 02002 01502 00602 00902 01102 03502 05902 01402 01602 06202 05502 0
49. 02 SONY 00505 04005 BRANDT 02402 GRANADA 01502 01602 00502 01002 01102 STANDARD 06005 BRANDT ELECTRONIC GRANADA UK 01602 02002 02202 SUPERSCAN 07805 00602 04602 04802 02602 04202 04702 SV2000 07805 BROKSONIC 01702 02602 04402 GRANDIN 00002 00402 01402 05502 05702 05902 SVA 05805 BUSH 01402 02102 02702 GRUNDIG 01402 01502 01902 06102 06302 SYLVANIA 2205 07805 08405 CALIX 00402 05702 02502 04602 06402 SYMPHONIC 07805 08405 08605 CANDLE 05402 05502 05702 HANSEATIC 00402 MEMPHIS 01402 TATUNG 03205 CANNON 05602 06402 HARLEY DAVIDSON METZ 00402 02502 04502 TEAC 01005 02605 CANON 00302 00002 06302 04602 05202 TECHNICS 00005 CARVER 01502 HARMAN KARDON MGA 00802 02002 gt TENSAI 05905 06005 CCE 01402 02102 05402 MGN TECHNOLOGY Bi TEVION 06005 CGE 00002 04702 HARMAN KARDON 02002 05502 gt THETA DIGITAL CIMLINE 01402 01502 MINERVA 04602 01005 CINERAL 02102 HARWOOD 01402 MINOLTA 00702 06202 06502 THOMSON 00305 CINEVISION 05702 HCM 01402 MITSUBISHI 00602 00802 01302 m TOSHIBA 00105 04605 CITIZEN 00402 02102 04302 HEADQUARTER 01502 03502 05802 gt URBAN CONCEPTS 05402 05502 05702 05902 06102 06502 06002 06202 a 00105 COLORTYME 05402 06602 MOTOROLA 00302 01102 06402 gt VOXSON 05605 COLT 01402 HINARI 01402 02002 02702 MTC 00002 02002 04702 m WHITE WESTINGHOUSE COMBITECH 02702 05002 05502 05902 06302 o 08405 CRAIG 00402 01002 01402 HI Q 01002 MULTITECH 00002 01402 04702 XBOX 00
50. 04 GALAXIS 03404 04704 GE 01504 GENERAL INSTRUMENT 03504 08204 08304 GOI 02604 GOLD BOX 03104 GRUNDIG 00604 03004 HIRSCHMANN 00604 01304 HITACHI 01404 02804 HOUSTON 08504 10704 10804 11004 11104 11304 11904 HTS 02604 HUGHES NETWORK SYSTEM 02304 05104 06904 WISI 00604 01304 01404 HUMAX 03404 05304 XSAT 00104 z INVIDEO 03604 ZEHNDER 04004 2 IVC 02604 ZENITH 03304 KATHREIN 00104 00604 00704 01004 01804 05604 KREISELMEYER a 00604 LABGEAR 06304 LOGIX 03804 LORENZEN 01104 MAGNAVOX 02004 02204 01404 03804 04204 a MARANTZ 00704 m MEDIASAT 03104 gt MEMOREX 02204 gt METRONIC 00004 gt MITSUBISHI 02304 MOTOROLA 03504 MYRYAD 00704 NEXT LEVEL 03504 NOKIA 01404 02104 02404 04904 05704 06804 OCTALTV 03704 ORBITECH 04504 PACE 01404 03004 05204 06604 PANASONIC 00904 01904 03004 06504 PANDA 01404 PAYSAT 02204 PHILIPS 00204 00704 01404 02004 02204 02304 gt 03104 04104 05104 5 06904 gt PIONEER 03104 o PRIMESTAR 08204 08304 PROMAX 01404 m PROSCAN 01204 01504 gt RADIOLA 00704 RADIOSHACK 03504 m RADIX 01304 e RCA 00404 01204 01504 03204 RFT 00704 SABRE 01404 SAGEM 02904 04804 05904 SAMSUNG 03804 04604 06004 06204 SAT CONTROL 06404 SATSTATION 04204 SCHWAIGER 04704 SEEMANN 01304 SIEMENS 00604 SKY 03004 03304 05204 12104 12204 12304 SKY HD 12404 SKY MASTER 07504 07604 07704 07804 07904 0
51. 0402 01502 01602 04602 05902 00402 00902 01402 06402 01502 05202 SONIC BLUE 03002 03102 SONTEC 00402 SONY 00002 00102 00202 00302 03302 04102 04702 STS 00702 06202 06402 06502 SUNKAI 02602 SUNSTAR 00002 04702 SUNTRONIC 00002 SYLVANIA 00002 00302 00802 01502 04702 05602 05902 06302 06402 SYMPHONIC 00002 04702 05902 06302 TANDBERG 05002 05202 TANDY 00002 01602 05902 06102 TASHIKO 00002 00402 04702 05702 TATUNG 00002 00602 00902 01302 01502 04702 06602 TEAC 00002 00602 02102 02202 03402 04702 05902 06302 06602 TECHNICS 00302 01902 04802 06402 TECO 00302 00402 00602 01102 TEKNIKA 00002 00302 00402 04702 05702 05902 06302 06402 TELEAVIA 00602 TELEFUNKEN 00602 02402 TENOSAL 01402 TENSAI 00002 THOMAS 00002 THOMSON 00602 01202 01302 02402 THORN 00602 01602 TIVO 03202 03302 TMK 02002 05002 05502 TOSHIBA 00602 00802 00902 01302 01502 03602 06202 TOTEVISION 00402 02002 05502 05702 UHER 02002 UNITECH 02002 05502 UNIVERSUM 00002 00402 01502 02002 VECTOR 00902 VECTOR RESEARCH 05402 05802 06002 VICTOR 00602 01302 05802 06002 VIDEO CONCEPTS 00902 05402 05802 06002 VIDEOMAGIC 00402 VIDEOSONIC 02002 05502 VILLAIN 00002 WARDS 00002 00302 00702 01002 01102 01202 01402 01502 02002 05502 05602 05702 05902 06202 06302 06402 06502 WHITE WESTINGHOUSE 01402 05902
52. 1 05101 05301 06801 14801 15001 15701 16201 ANAM 00101 02701 03401 15701 16201 ANAM NATIONAL 03401 08301 15701 16201 ANGLO 14801 ANITECH 00101 14701 14801 15401 15701 16201 ANSONIC 14801 15701 15901 16201 AOC 00101 00301 00901 01201 01301 01601 02601 02701 05601 14701 15401 16301 16501 17901 APEX DIGITAL 09301 09701 09901 AR SYSTEM 15701 16201 ARCEN CIEL 16001 ARCAM 16001 ARDEM 15701 16201 ARISTONA 14701 15701 16201 ART TECH 14701 ASA 01401 ASBERG 14701 15701 16201 ASORA 14801 ASTRA 14801 15701 16201 ATLANTIC 14701 15701 16201 ATORI 14801 ATORO 14801 AUDIOSONIC 00401 01701 14701 14801 15701 15901 16201 AUDIOTON 14801 AUDIOVOX 14701 AUTOVOX 15501 16101 AWA 00101 14801 15701 15901 16201 BAIRD 15801 BANG amp OLUFSEN 07201 BASIC 00101 BASICLINE 14701 14801 15701 15901 16201 BAUR 00401 04601 06701 14701 14801 15701 16101 16201 BAYSONIC 02701 BEAUMARK 02601 BEC 14701 BECRESE 14701 15401 BEKO 04701 06201 09001 09101 14701 15701 16201 BELCOR 16301 BELL amp HOWELL 02001 14701 18401 18601 18701 BENCHMARK BEAUMARK BEON BESTAR 14701 14801 15401 00401 14701 15701 16201 14701 14801 15701 15901 16201 BESTAR DAEWOO 15901 BIGSTON 14801 BLACK DIAMOND 16201 BLAUPUNKT 02801 BLUE SKY 08501 11401 14701 15701 16201 BONDSTEC 03301 15501 BPL 15701 16201 BRADFORD 02701 B
53. 1 THOMSON 01701 03801 07101 08001 12501 15701 15801 16001 16101 1620 THORN 00401 01401 04601 THORN FERGUSON 06701 14701 15101 15701 15801 15901 1620 14701 15001 TMK 02601 16301 17901 TNCI 00201 TOBO 14801 TOKAI 14701 15701 15901 6201 TOSHIBA 00901 02001 02101 06601 07801 08301 0901 12101 12301 3001 13201 16701 8101 18901 TOSONIC 5401 TOTEVISION 15401 TOWADA 16101 TRANS CONTINENS 5701 1620 TRANSONIC 15701 1620 TREVI 4801 TRIAD 14701 15701 16201 TRILUX 14701 TRIUMPH 06801 15701 16201 TRIVISION 4801 TUNTEX 00101 00301 01201 TVS 05801 TVTEXT95 16201 UHER 04101 14701 15701 5901 16201 ULTRAVOX 15701 15901 16201 UMA 4701 UNIC LINE 5701 16101 16201 UNIMOR 4701 UNITED 5701 1620 UNIVERSAL 17301 1910 UNIVERSUM 00401 01401 01501 03701 04401 04701 06401 14701 14801 5701 16101 16201 UNIVOX 15701 1620 URANYA 14801 VANGUARD 14801 VECO 14801 VECTOR RESEARCH 0030 VESTEL 00401 14701 15701 1620 VEXA 14701 14801 15701 1620 VICTOR 00701 03401 08301 0840 VIDEO SYSTEM 14701 15701 16201 VIDEOSAT 03301 15901 VIDIKRON 00801 VIDION 14801 VIDTECH 02601 16301 16501 17901 VIEWSONIC 13301 VISION 04101 14801 15701 16201 VISON 14701 VIZIO 18801 VORTEC 14701 15701 16201 VOXSON 02201 14701 15701 6201 WALTHAM 04501 15701 16201 WARDS 00301 00801 02601 1301 14701 16301 6501 17301 17801 7901
54. 14801 GRANADA 00401 02901 04301 INTERBUY 14801 15701 16201 LEVIS AUSTRIA MERCURY 14801 15701 16201 06801 14701 15701 INTERDISCOUNT 5701 16201 METZ 05501 15701 16201 15801 1620 470 LEYCO 00401 03701 14701 MGA 00301 01901 02601 GRANDIN 07701 15701 15901 INTERFUNK 00401 02201 03301 5701 16201 15701 16201 16301 16201 04601 06701 14701 LG 00301 00401 00901 16501 17901 18901 GRENADIER 1480 5701 16101 16201 01601 02601 09001 19001 GRUNDIG 00401 02801 06301 INTERNAL 5701 15901 16201 5701 16201 16301 10301 15701 16201 07001 07401 15701 INTERVISION 00401 03701 05001 6501 17701 17901 MICROSTAR 10301 16201 4901 15701 16201 8901 MIDLAND 00201 00501 00601 GRUNPY 0270 IRRADIO 14701 14801 15101 LIESENK amp TTER 15401 16401 16601 GTT 1480 5201 15501 15701 00401 15701 16201 17401 18701 HAIER 17601 1880 620 LIESENK TTER MINATO 15701 16201 HALLMARK 02601 15401 16301 IST 14701 4701 MINERVA 0630 17901 ISUKAI 4701 15701 16201 LIESENKOTTER MINOKA 05101 14701 15701 HANKOOK 00301 02601 02701 ITL 14801 4701 15701 16201 16201 HANSEATIC 00401 04101 04601 ITS 04801 14801 15701 LIFE 14801 MINUTZ 1910 05201 07001 14701 6201 LIFETEC 14801 15701 15901 MITSUBISHI 00301 01301 01601 14801 15301 15701 ITT 02201 04601 06901 16201 01901 02001 02601 16101 1620 6101 LINITRON 15401 02701 03101 03401 HANTAREX 06801 14701 14801 ITT NOKIA 16101 LLOYD 15401 0
55. 15701 16201 15701 16201 RADIO SHACK15401 15701 16201 RADIOLA RADIOMARELLIO6801 15701 16201 6301 17701 17901 18401 18701 18901 00401 14701 15701 620 RADIOSHACK 00301 00501 02001 02601 02701 RADIOSTONE 16201 RADIOTONE 14701 14801 15701 RCA 00001 00301 00501 01101 01201 02601 08601 11501 11801 13901 12201 12501 2601 12801 15801 6301 16401 16501 16601 17401 17901 18401 18701 900 REALISTIC 00301 02001 02601 02701 16301 17701 7901 18401 18701 890 RECOR 15701 16201 RECORD 14701 RECTILIGNE 15701 16201 REDIFFUSION 04601 REDSTAR 15701 16201 REFLEX 5701 16201 REGENTE 14801 REOC 09001 REVOX 00401 14701 15701 6201 REVOX STUDER 14701 REX 02201 03501 03701 5001 15301 RFT 05201 15301 15701 16201 RICOH 5701 16201 R LINE 00401 RMB 15401 ROADSTAR 00101 03701 05201 4801 15701 16201 RODEX 15701 16201 ROSITA 14801 ROWA 14801 ROYAL 14801 RUKOPIR 15701 16201 RUNCO 00201 00301 06501 07501 SABA 01701 02201 03801 04201 15801 16001 SACCS 03201 SAGEM 07701 SAISHO 00101 03701 06801 14701 SAIVOD 15701 16201 SAKURA 14801 SALORA 02201 04601 06901 15201 16101 SAMBERS 06801 15101 15201 SAMPO 00101 00301 01201 01301 02001 02501 02601 08301 13301 15401 16301 17901 18901 SAMSUNG 00101 00301 00401 00901 01101 01201 02001 02601 03701 04701 07001 07401 07801 08901 09801 10501 10701 14701 14801
56. 302 OLYMPUS 00302 01902 04802 o ELCATECH 01402 05402 05802 06002 06402 o DVD RECORDER ELECTROHOME 06102 06602 OPTIMUS 00402 01102 01602 00806 00402 05702 KAISUI 01402 02802 05502 05702 demon piace ELECTROPHONIC KEC 00402 02102 OPTONICA 05502 SAMANA COE 00402 05702 KENDO 04902 ORION 01702 02602 02702 EMEREX 00102 KENWOOD 00602 01302 05402 04402 05002 EMERSON 00002 00302 00402 05802 06002 06102 OSAKA 04702 VCR 00802 00902 01702 06602 OSAKI 00002 00402 01402 02002 02102 04302 KLH 01402 04702 ADMIRAL 01102 04402 04702 05002 KODAK 00302 00402 05702 OTTO VERSAND ADVENTURA 00002 05502 05702 05902 06402 01502 AIKO 02102 06102 06302 06402 KOLIN 00602 00802 PALLADIUM 00402 00602 01402 AIWA 00002 00402 02202 ESC 02002 02102 KORPEL 01402 PANASONIC 00302 01802 01902 02602 02702 FERGUSON 00602 02402 LENCO 02102 03102 03702 04502 AKAI 04902 FIDELITY 00002 04702 LEYCO 01402 04802 05102 05302 gt FINLANDIA 01502 01602 LG 00402 00702 00902 05602 06402 v AKIBA 01402 FINLUX 00002 00702 01502 02902 05902 PATHE MARCONI m ALBA 01602 04702 04802 LLOYD 04702 05902 06302 00602 5 Iu 04902 LLOYD S 00002 PENNEY 00302 00402 00702 gt FIRSTLINE 00402 00802 00902 LOEWE 00402 01502 04502 02002 03702 04202 53 En PENTAX PERDIO PHILCO PHILIPS PILOT PIONEER 00702 05402 06202 06502 00002 04702 00302 05602 06402 00302 01502 032
57. 305 02002 05502 05702 HITACHI 00002 00402 00602 05502 05902 06302 YAMAHA 00005 00705 00805 CROWN 01402 02102 00702 02002 04702 MURPHY 00002 04702 04305 04405 CURTIS MATHES 06202 MYRYAD 01502 YUKAI 05605 00302 00602 01202 HUGHES NETWORK SYSTEMS NAD 01602 ZENITH 00105 01205 02905 03702 05402 05502 00702 NATIONAL 01902 04802 07405 05602 05902 06402 HYPSON 01402 NEC 00302 00402 00602 ZEUS 03305 CYBERNEX 02002 05502 IMPERIAL 00002 04702 01102 01302 01602 CYRUS 01502 INSIGNIA 05702 05402 05802 06002 DAEWOO 00902 01602 02102 INSTANT REPLAY 06102 06602 BD PLAYER 03402 04302 06302 05902 06402 NECKERMANN DENON 01307 DANSAI 01402 INTEQ 05702 01502 04602 05002 LG 00907 DBX 05402 05802 06002 INTERFUNK 01502 NESCO 01402 LOEWE 00307 DEGRAAF 00702 ITT 00602 01602 02002 NEWAVE 00402 MARANTZ 00707 DECCA 00002 01502 04702 04902 NIKKO 00402 05702 ONKYO 00207 DEGRAAF 04702 ITT NOKIA 04902 NOBLEX 02002 05502 PANASONIC 00807 DENON 00702 ITV 00402 02102 NOBLIKO 04602 PHILIPS 00607 DIMENSIA 05602 JC PENNEY 05402 05502 05602 NOKIA 00602 01602 02002 PIONEER 01007 01107 DUAL 00602 05702 05802 06002 04902 SAMSUMG 00507 DUMONT 00002 01502 01602 06102 06202 06402 NORDMENDE o SHARP 01207 04702 06502 06602 06702 00602 02402 m SONY 00407 DURABRAND 05702 JCL 06402 OCEANIC 00002 00602 zl YAMAHA 00007 00107 DYNATECH 00002 04702 05902 JENSEN 00602 06202 06602 OKANO 02302 02602 06302 JVC 00602 00902 01
58. 5 ft to 43 5 ft 2 We recommend that you use the initial setting 0 5 m or 1 5 ft for Center The width of the sweet spot becomes slightly wider than the width of this unit if you run the AUTO SETUP page 15 or if you configure SETTING PARAMETERS page 34 Example Front left channel Center channel 2 k IMAGE LOCATION Image location SET MENU MANUAL SETUP IMAGE LOCATION Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural NOILONGOYULNI NOILVHVd3Hd s3univ3ad MOVEAV 1d Customizing this unit SET MENU System configurations ADVANCED SETUP Using an external amplifier Controlling external components XIGNAddV 35 En 36 En You can adjust this parameter only when SBeamPlus2 5 Beam or 3 Beam is selected in BEAM MODE page 23 52 To adjust the volume of each channel see CHANNEL LEVEL page 37 Choices OFF ON Select ON to configure the sound direction 1 Adjust the image location for the front left channel LEFT The higher the percentage the louder the output from the center With the front left channel adjusted
59. 6 Music Music Playing back 5 1 channel sources in 7 1 channel surround This unit decodes 5 1 channel sources and then playback them in up to 7 1 channel surround One of the following decoders is automatically selected depending on the input signals Set CHANNEL OUT to 7 1ch page 23 5 1ch input source Decoder PCM Dolby Digital Dolby Digital EX Dolby TrueHD Dolby Digital Plus Dolby Pro Logic IIx Movie Music DTS Digital DTS ES matrix DTS HD Master Audio DTS HD High Resolution Audio DTS ES matrix DTS ES discrete DTS ES discrete Mr 2 2 Press MSUR DECODE to switch between Dolby Pro Logic Movie and Music To switch to the Dolby Pro Logic IIx Music decoder select PLIIxMusic To switch to the Dolby Pro Logic IIx Movie decoder select one of the decoders other than PLIIxMusic The FM tuner of this unit provides the following two modes for tuning Frequency tuning mode You can tune into a desired FM station by searching or specifying its frequency Preset tuning mode You can preset the frequencies of FM stations by registering them to specific numbers and later just select those numbers to tune into Adjust the FM antenna connected to this unit for the best reception Tuning into the desired FM station Frequency tuning Press ORADIO repeatedly to select FM If you select FM with INPUT on the front panel press OR
60. 6701 11201 11901 15701 16201 ITV 57701 15901 16201 LLOYD S 14801 14701 14801 15701 HANTOR 15701 1620 JBL 00801 1470 LODGENET 18401 18601 18701 16201 16301 HARLEY DAVIDSON JC PENNEY 16301 16401 16501 LOEWE 06701 14701 15701 16501 17901 19001 15401 6601 16701 17301 16201 MIVAR 03901 04001 06801 HARMAN KARDON 7401 17801 17901 LOGIK 15701 16201 18401 07601 15201 15301 00801 8101 18401 18501 18601 18701 MONTGOMERY WARD18401 18601 50 En MORGAN S MOTOROLA MTC MULTITEC MULTITECH MUSIKLAND MYRYAD NAD NAIKO NAKIMURA NAMSUNC NATIONAL NEC 18701 15701 16201 01301 14701 00301 00901 06701 15401 16101 16301 16501 16701 17901 18101 15701 16201 00101 02701 14701 14801 15401 15701 16101 16201 15701 16201 07001 15701 16201 02101 02601 04601 11301 16301 17901 18101 15701 16201 15701 15901 16201 14801 14701 00101 00301 00601 02001 02101 02401 02601 05701 06501 13201 14801 15701 15901 16201 16301 16501 17901 NECKERMANNO00401 07001 14701 NEI NETSAT NEUFUNK NEWAVE NEWTECH NEXXTECH NIKKAI NIKKO NOBLEX NOBLIKO NOGAMATIC NOKIA NONAME NORCENT 14801 15001 15701 16101 16201 00401 14701 15701 16201 00401 15701 16201 15701 16201 00101 01201 01301 02601 14701 14801 15701 15801 16201 17501 00401 03701 14701 15401 15701 16201 00301 01201 02601 16301 17901 1480 15101
61. 701 16201 14801 15901 16301 1540 0000 1480 1480 00301 00801 02501 14701 16301 16801 17201 17701 17801 17901 1820 02501 02701 15401 17201 17701 18201 00001 00901 01201 01301 02601 05601 1970 00401 15701 16201 05501 00101 01201 02601 0010 15001 01301 02201 01201 08301 00101 00401 00601 00801 00901 02001 02101 06801 14701 15701 16201 18801 10301 00101 00401 03701 05101 05201 05701 08501 11401 15701 16101 16201 1480 03301 14801 15001 15701 16201 15701 16201 0410 00601 03401 08301 14701 1640 15701 16201 1480 00601 16301 16401 17901 1480 00101 00601 01201 01301 02601 03701 08401 14801 15701 16201 14701 14801 00801 00901 01201 01901 02701 15401 16301 16501 16701 17801 17901 18101 18401 18601 18701 18901 14801 15801 16001 15701 16201 14801 TELEFUNKEN 01701 03601 04201 52 En 08001 08901 15701 15801 16001 16201 TELEFUSION 15701 1620 TELEGAZI 15701 1620 TELEMEISTER 04101 15701 16201 TELEOPTA 14801 TELERENT 18401 18601 18701 TELESONIC 15701 1620 TELESTAR 14801 15701 16201 TELETECH 00101 14801 15701 16201 TELETON 16101 TELEVIEW 15701 1620 TEMPEST 14801 15701 16201 TENNESSEE 15701 16201 TENSAI 04101 14701 14801 15701 15901 16201 TENSON 14801 TERA 00301 16301 TESLA 14701 TESLA ORAVA 14701 TEVION 15701 1620 TEXET 15901 THOMAS 14701 14801 1540
62. 8004 SKY SKY Digital 08104 o STARCHOICE 08204 08304 m SM ELECTRONIC zl 05404 SMART 08804 08904 09204 o 09304 09404 09504 o 10204 10304 10504 10904 11204 11404 11504 SONY 01704 03004 06704 STAR CHOICE 03504 STRONG 06404 TANTEC 01404 TECHNISAT 04404 04504 TELESTAR 04504 THOMSON 01404 03104 03904 06104 Tivo 08404 TOPFIELD 05504 TOSHIBA 02304 02704 06904 TPS 02904 05904 v ULTIMATETV 01204 01704 m UNIDEN 02004 02204 5 UNIVERSUM 00604 VENTANA 00704 55 En Numerics 2 channel source surround decode 24 3Beam beam mode 2 2 24 5 1ch beam mode 5 1 channel source 7 1 channel decode 5 beam mode 23 5BeamPlus2 beam mode 7 1ch beam mode AC ON STANDBY ADVANCED SETUP Activating SIRIUS Satellite Radio subscription Adaptive DRC Dynamic range control Adaptive dynamic range control Dynamic range control 2 37 Adjusting volume level automatically UniVolume 31 ADVANCED SETUP Adventure CINEMA DSP program All Channel Search mode SIRIUS Satellite Radio 27 Attaching stands installation Audio video component connection AUDIO DELAY SOUND SET MENU Audio delay SOUND SET MENU AUDIO IN jacks Audio Sampling input signal information AUDIO SELECT HDMI setup Audio select HDMI setup 2 AUTO DIMMER Front pane
63. ADIO on the remote control prior to step 2 so that you can operate the procedures from step 2 Press PTUNING v to specify the frequency The TUNED indicator on the front panel display lights up when the tuner is tuned into a station The STEREO indicator also lights up if the program being broadcasted is in stereo See also FM Mode page 32 Lights up Tunen STEREO The frequency changes in the following manner according to how you press TUNING When you press the key more than 1 second The tuner searches the frequency of a station that is detectable around the current frequency This is effective when the tuner can receive strong signals without any interference Once the search starts release the key When you keep holding the key the search continues even when a station is detected This is useful when you want to tune in to a specific station When you press and release the key The tuner increases or decreases the frequency in steps Use this method when the tuner cannot receive strong signals and stations are skipped during the search To directly specify the frequency use Numeric keys to enter the frequency of the station Enter only integers For example if you want to set the frequency to 88 9 MHz enter 889 e When you press Numeric keys during preset tuning a preset number is selected Set the tuner to the frequency tuning mode using PTUNING A V prior to th
64. CONTINENTAL EDISON 16001 CORONADO 15401 COSMEL 14801 15701 16201 CRAIG 02701 14701 CROSLEY 00801 14701 CROWN 00101 00401 02701 04701 05201 14701 14801 15401 15701 16201 CRYSTAL 14701 CTC 03301 CURTIS MATHES CXC DAEWOO DAICHI DANSAI DAWA DAYTON DAYTRON DE GRAAF DECCA DEITRON DENON DENVER DESMET DIAMANT DIAMOND DIGATRON DIGILINE DIGISTAR DIGITOR DIK DIMENSIA DIXI DORIC DTS DUAL 00301 00501 00801 00901 01301 01801 02001 02301 05601 08901 11801 12201 14701 15401 16301 16601 16701 17901 18101 18401 18601 18701 02701 00101 00301 00401 01201 01601 02001 02401 02601 02701 04901 05601 07901 08201 13101 14701 14801 15401 15701 15901 16201 16301 16501 17901 14801 00401 15401 15701 16201 14701 15701 16201 00101 14801 15401 15701 15901 16201 16301 17901 02901 06901 00401 06801 14701 15701 16201 15701 15901 16201 01801 14801 15701 16201 14701 14801 15701 16201 15701 16201 14801 00401 15701 16201 17001 17501 15701 16201 15701 16201 18401 18701 00101 00401 14701 14801 15701 16201 16101 14801 14701 14801 15001 15301 15601 15701 15801 16001 16101 16201 DUMONT 00201 15401 16301 DURABRAND 16801 17601 18201 DUX 15701 16201 D VISION 15701 16201 DWIN 09201 10101 DYNAMIC 14801 DYNATECH 15401 DYNATRON 15701 16201 DYNEX 15701 ECE 00401 ELBE 03501
65. Choices OFF MID DEEP Select OFF to output bass sounds without change Select MID to output moderately enhanced bass sounds Select DEEP to output deep bass sounds MUSIC ENHANCER Music Enhancer SET MENU SOUND SET MENU MUSIC ENHANCER Use to turn on or off the compressed audio enhancer When this function is enabled the ENHANCER indicator lights up on the front panel display page 7 AUX1 2 Select whether to apply the compressed audio enhancer for playback of AUX1 2 input sources Choices ON OFF Select ON to enable the compressed audio enhancer for playback of AUX1 2 input sources Select OFF to disable the compressed audio enhancer for playback of AUX1 2 input sources iPod Select whether to apply the compressed audio enhancer to iPod iPhone playback Choices ON OFF Select ON to enable the compressed audio enhancer for iPod iPhone playback Select OFF to disable the compressed audio enhancer for iPod iPhone playback CHANNEL LEVEL Channel level SET MENU SOUND SET MENU CHANNEL LEVEL Use to adjust the volume of each channel with test tones Control range 10 0 dB to 10 0 dB Adjustable channels vary depending on the CHANNEL OUT setting Surround Back and Surround Back L are not adjustable when SOUND OUT is set to SPEAKER SOUND OUT MENU SOUND BEAM OUT CONFIG Sound beam output configuration SET MENU SOUND O
66. ER SIRIUS 10 Repeat steps 6 through 8 to lock all the desired channels To exit from the menu press OPTION This unit is tuned into the last channel you select in the Parental Lock screen If the channel is locked this unit is tuned into 184 Weather or 000 Sirius Tuning into the locked channels Tune into the channel with direct number access page 28 or Preset Search mode page 28 When you tune into the locked channel LOCKED CH appears on the front panel display followed by the following message Enter the Parental lock code by using the Numeric keys cancel this operation press MENT SIRIUS If an incorrect number is entered Wrong appears on the front panel display and this unit is tuned into the previously selected channel NOILONGOHINI NOILVHVdHHd Playback Playback mode FM tuning SIRIUS Satellite Radio tuning EE f ED De z PAARE Playing back iPod Useful features SONILL3S XIGNAddV 29 En CODE 8 0 10 8 0 8 Gi Q YAMAHA OiPod VOLUME UNIVOLUME SLEEP INFO 30 En Displaying the SIRIUS Satellite Radio information Use this feature to display the SIRIUS Satellite Radio information on the front panel display If a status message or an error message appears on the front panel display see SIRIUS Satelli
67. IntelliBeam microphone for AUTO SETUP page 15 Front panel display UNIVOLUME ENHANCER BASSEXT 00 UNIVOLUME indicator Lights up when the UniVolume function is turned on page 31 CINEMA DSP indicator Lights up when a sound field program is selected page 22 HDMI indicator Lights up when the signal of the selected input source is input from the HDMI IN jack s Tuner indicators FM Light up when this unit is tuned into an FM station page 25 SIRIUS MEMORY flashes during the preset operation page 28 5 SIRIUS indicators Light up when this unit is tuned into a SIRIUS Satellite Radio channel page 26 Wireless indicators TRNS Lights up when a wireless connection is established between the Yamaha wireless subwoofer kit SWK W10 and this unit page 13 RECV Lights up when a wireless connection is established between the Yamaha wireless transmitter for iPod PDX 50TX and this unit page 30 Decoder indicators Light up when the corresponding decoder operates page 21 SLEEP indicator Lights up when the sleep timer is set page 31 9 Volume level indicator Displays the current volume level ENHANCER indicator Lights up when the Music Enhancer is selected page 37 BASS EXT indicator Lights up when the bass extension mode is turned on page 37 02 PCM indicator Lights up when this unit is reproducing PCM Pulse Code Modul
68. O SETUP procedure again IF SUBWOOFER NOT APPLICABLE is displayed even though a subwoofer is connected to this unit and turned on check the connection and then increase the volume level of the subwoofer and run the AUTO SETUP procedure again Depending on the environment of your listening room the beam angles of front right and left and surround left and right may be set to the same value even if BEAM MODE 5 BEAM is displayed as a result Press ENTER to confirm the results The menu screen disappears in two seconds AUTO SETUP COMPLETE Please remove the HIC from the unit and the listening Position als 22 If you do not want to reflect the results press RETURN Disconnect the IntelliBeam microphone The measurement results are stored in the internal memory of this unit until you run the AUTO SETUP procedure again or configure the settings manually Changing OSD language AUTO SETUP IntelliBeam Using the system memory 17 En NOILONAOYLNI EIS s3univ3ad MOVEAV 1d SONILLAS XIGNAddV 90 Cw Qua Que ENTER MOVE MUSC TANMENT OFF Ge STEREO 8800 9880 8 M 2 0 YAMAHA QA RETURN SETUP 18 En Error messages for AUTO SETUP If an error message is displayed on your TV check the error message list to solve the problem and then follow
69. OUT BASS Management parameters See also Changing the audio output method for surround playback page 23 0 9 FRONT SURROUND SUR BACK PRE OUT FRONT PRE OUT jacks Output front right and left channel signals SURROUND PRE OUT jacks Output surround right and left channel signals 3 SUR BACK PRE OUT jacks Output surround back right and left channel signals CENTER PRE OUT jack Outputs center channel signals 5 SUBWOOFER PRE OUT jack Connect a subwoofer with a built in amplifier The following functions are disabled when an external amplifier is used AUTO SETUP page 15 CINEMA DSP programs page 22 UniVolume page 31 MUSIC ENHANCER page 37 BASS EXTENSION page 37 Adaptive DRC page 37 NOILONGOYULNI NOILVHVd3Hd s3univ3ad MOVEAV 1d Customizing this unit SET MENU System configurations ADVANCED SETUP Using an external amplifier Controlling external components XIGNAddV 41 En YAMAHA Transmission indicator AV Power input selector keys Cursor A xz lt D keys MENU TOP MENU ORETURN lt MUTE VOLUME operation keys Numeric keys SET External component operation keys 42 En Controlling external components Depending on the ex
70. P Use to configure the wireless connection between this unit and PDX 50TX or SWK W10 Wireless Function Wireless function Select whether or not to use the wireless function of this unit Choices No Yes Select No to disable the wireless function of this unit Select Yes to enable the wireless function of this unit iPod Interlock iPod interlock Select whether or not to use the iPod iPhone interlock function When the iPod iPhone interlock function is on this unit automatically turns on if you turn on the iPod iPhone when this unit is in the standby mode In addition this unit is set to the standby mode if the iPod iPhone is set to the standby mode Choices OFF ON Select OFF to disable the iPod iPhone interlock function The standby consumption power of this unit decreases Select ON to enable the iPod iPhone interlock function Group ID Group ID The group ID is used for wirelessly connecting Yamaha products that support yAired To establish a connection among this unit PDX 50TX and SWK W10 set the group ID of these products to the same group Choices A1 A2 B2 27 22 PDX 50TX supports 1 1 2 A2 and 3 only DISPLAY MENU B F DISPLAY SETUP Front panel display setup SET MENU DISPLAY MENU F DISPLAY SETUP Use to adjust the brightness and display settings of the front panel display STANDARD DIMMER Standard dimmer Use
71. P program 23 General troubleshooting Group ID Wireless setup H HDMI control function LL aa as HDMI CONTROL INPUT MENU HDMI control INPUT MENU HDMI indicator HDMI jacks HDMI SETUP INPUT MENU HDMI setup INPUT MENU HDMI Audio delay HDMI glossary E IMAGE LOCATION MANUAL SETUP 35 Image location MANUAL SETUP 35 INFO key Remote control INPUT ASSIGNMENT INPUT MENU Input assignment INPUT MENU Input channel indicators INPUT key Front panel INPUT MENU INPUT RENAME INPUT MENU Input rename INPUT MENU Input selector keys Remote control Input signal information display Input source setting configuration Installing batteries remote control IntelliBeam iss INTELLIBEAM key Remote control 9 INTELLIBEAM MIC jack iPod Interlock Wireless setup iPod interlock Wireless setup iPod troubleshooting iPod iPhone playback terial 8 Su aaa a trivia 8 E J Jazz Club CINEMA DSP program BL LANGUAGE SETUP DISPLAY MENU Language setup DISPLAY MENU LFE 0 1 channel glossary LFE Level Sound output LFE LEVEL Subwoofer settings Linear PCM glossary L
72. RANDT 01701 04201 15801 16001 BRENDSTAR 14801 BRINKMANN 15701 16201 BRIONVEGA 14701 15001 15701 16201 BRIORRYEGA 14701 BROCKWOOD 15401 BROKSONIC BROKWOOD BUSH BYDESIGN CAMPLE CANDLE CAPEHART CARAD CARENA CARNIVALE CARREFOUR CARVER CASCADE CASIO CATHAY CCE CELEBRITY CELERA CENTURION CGE CGM 03101 05801 15401 16801 16301 00101 00101 00401 04801 04901 08501 11401 14701 15701 15901 16101 16201 14301 14401 14501 14601 15401 00301 15401 16301 17801 17901 14701 15401 15701 16201 15701 16201 00301 14701 15701 16201 00801 02401 14701 00101 15701 16201 15701 16101 16201 00401 14701 15701 16201 00401 15701 16201 00001 09701 00401 14701 15701 16201 17901 03301 14801 16001 14801 CHANGHONG 09701 CHING TAI 00101 01201 CHUN YUN 00001 00101 01201 02701 CHUNG HSIN 00701 01601 02701 CIE 14801 CIMLINE 00101 14801 CINERAL 01201 05601 CIRCUIT CITY 15401 CITIZEN 00301 00901 01201 14701 15401 16301 16701 16801 17801 17901 18101 18201 18601 CITY 14801 CLARION 02701 CLARIVOX 00401 15701 16201 CLATRONIC 03301 04701 14801 15701 16201 CLP CLASSIC 16301 COLORTYME 14701 16301 17901 COMPUTRON 14801 CONCERTO 16301 17901 CONCORDE 14801 CONDOR 04101 04701 14701 14801 15701 16201 CONIC 14701 15401 CONRAC 10301 CONRAD 15701 16201 CONTEC 00101 02701 14801 15701 16201 18901
73. ROUND key Remote control SURROUND PRE OUT jacks System configurations SYSTEM CONNECTOR terminal System memory using 2 E T Table top stand floor stand using installation Talk Show CINEMA DSP program m TONE CONTROL SOUND SET MENU Tone control SOUND SET MENU TOP MENU key controlling external component 42 TOP MENU key Remote control 9 Transmission indicator Remote control TREBLE Tone control Treble Tone control esses TRNS Wireless indicators Troubleshooting Tuner indicators Tuner operation keys Remote control TURN ON VOLUME ADVANCED SETUP TV button Remote control TV connection TV INPUT key controlling external component TV key controlling external component 8 TV MUTE key controlling external component 42 TV operation keys Remote control 9 TV VOL key controlling external component 42 TV Audio delay ik sess 36 E U UNIT SETUP DISPLAY MENU 22 2 40 Unit setup DISPLAY MENU UNIVOLUME indicator UNIVOLUME key Remote control 9 m V VIDEO jacks Video Signal In input signal information VOLUME keys Front panel VOLUME keys Remote control Volume level at power on ADVANCED SETUP
74. RUNCO 00003 SAGEM 01803 SAMSUNG 00003 00503 SCIENTIFIC ATLANTA 00203 01403 01903 SHAW 04503 SIGNATURE 04703 SONY 02103 STARCOM 00103 SUPERCABLE 00803 TANDY 04103 TELE 1 01203 TOCOM 02803 04203 04403 04803 TORX 00103 TOSHIBA 00003 TRANS PX 00803 TS 00103 TV86 03603 UNIKA 03703 03803 04303 UNITED CABLE 00103 UNIVERSAL 02903 03703 03803 04003 04303 04603 VIEWSTAR 03103 03203 03603 04103 VERIZON FIOS 05003 05103 ZENITH 00003 01503 02003 03403 04303 SATELLITE TUNER SAT 06404 ABSAT 00104 ALBA 01404 ALPHASTAR 02504 AMSTRAD 03004 ASTON 00304 05004 ASTRO 00604 ATSAT 06404 AVALON 01304 BLAUPUNKT 00604 BRITISH SKY BROADCASTING 03004 05204 CANAL DIGITAL 03104 CANAL SATELLITE 03104 CANAL 03104 CHAPARRAL 00804 CITYCOM 05304 COMAG 09004 09104 09704 10104 10304 11604 11704 11804 12004 CONNEXIONS 01304 CROSSDIGITAL 04604 CYRUS 00704 DAERYUNG 01304 DAEWOO 06304 D BOX 02104 04904 DIGENIUS 01104 DIRECTV 00904 01204 01504 01704 02204 02304 02804 04104 04604 05104 06904 DISH NETWORK SYSTEM 02604 03704 DISHPRO 02604 03704 DISTRATEL 00004 DMT 04004 DNT 00704 01304 DREAM MULTIMEDIA 05804 DREAMBOX 08604 08704 09604 09804 09904 10004 10404 10604 ECHOSTAR 00504 01304 01604 02604 03104 03604 03704 04304 ENGEL 03804 EXPRESSVU 02604 FINLUX 01404 FOXTEL 07004 07104 07204 07304 07404 FRACARRO 03604 FTE 03404 FUBA 013
75. The symbols beside the cables correspond with the symbols described in Cables used for connections page 12 TV Blu ray disc player _ a LI G G z 1 Pull out the cap Optical ia if attached 2 Check the direction Power cable to AC wall outlet 12 En Connecting audio and video components Determine the connection types depending on the jacks available on this unit and your external components The symbols in the following table correspond with the symbols described in Cables used for connections page 12 VIDEO IN OUT AUDIOIN DIGITAL IN HDMI IN jacks jacks jacks jacks Jacks to use Cable to Input selection External component Signal type k On external component On this unit use ey TV Video Composite video input VIDEO OUT 1 Audio Analog audio output AUDIO IN TV a TV External component Audio video HDMI output HDMIIN 1 4 1 HDMII 4 with HDMI output wu External component Audio Coaxial digital output DIGITAL IN AUX 2 amp AUX2 with component video output Video Component video output VIDEO IN COMPONENT 2 External component Audio Optical digital output DIGITAL IN AUX 1 AUXI with composite video output Analog audio output AUDIO IN AUX 1 Video Composite video output VIDEO IN VIDEO 1 22 Video signals inpu
76. This unit automatically skips the locked channels when this unit is in the All Channel Search mode or Category Search mode Setting the code number and locking channels Use this feature to set the Parental Lock code number PIN and select the channels to be locked 1 Press OOPTION on the remote control The option menu for SIRIUS appears on the front panel display 2 Press A V repeatedly to select ParentalLock and then press ENTER 3 Use P to select a digit to edit and 25 5 to select a number to enter the desired 4 digit code number If you have entered a code number before enter the same code number SIRIUS The entered code number is needed for tuning in the channel or unlocking the channel Write it down below Code number Press GENTER The confirmation screen appears 5 Press GENTER again to confirm the code number f a code number is already registered and you enter the different number Wrong appears and the screen returns to step 3 Enter the correct code number If you forget the Parental lock code or want to change it reset it using SIRIUS PIN page 41 Press 4 D to select the category of a channel you want to lock SIRIUS Press A 7 to select a channel you want to lock SIRIUS Press GENTER to lock the selected channel You can toggle channel lock and unlock as you press ENT
77. UT MENU SOUND BEAM OUT CONFIG Use to configure the number of output channels or audio output method For details see Changing the audio output method for surround playback page 23 SOUND OUT Sound output SET MENU SOUND OUT MENU SOUND OUT Use to configure the audio signal output settings NOILONGOYULNI NOILVHVdHHd SAYNLVAA MOVEAV ld Customizing this unit SET MENU System configurations ADVANCED SETUP Using an external amplifier Controlling external components XIGNAddV 37 En 2 9 CG Que ENTER MOVE MUSC TANMENT OFF 8800 8 0 YAMAHA 2 4 b Ov RETURN 38 En SOUND OUT Sound output redirection Use to redirect the output of audio signals Audio output of all the channels switches simultaneously Choices SPEAKER PRE OUT Select SPEAKER to output sounds from this unit Select PRE OUT to output audio signals from the PRE OUT jacks of this unit You also need to configure the parameters from BASS OUT to LFE Level described below gt q The parameters from BASS OUT to LFE Level are settings for the PRE OUT jacks when they are selected as audio output jacks BASS OUT Bass sound output redirection Use to redirect the output of bass sounds The settings under BASS OUT are for the PRE OUT
78. XR 1000 00002 00302 01402 06302 06402 YAMAHA 00602 05402 05802 06002 06602 YAMISHI 01402 YOKAN 01402 YOKO 02002 ZENITH 00002 00202 00502 04402 05702 05802 05902 06002 CABLE TV TUNER ABC 00103 00203 02803 04703 ADELPHIA 04503 ALLEGRO 02903 03403 AMERICAST 02003 ANTRONIX 03703 03803 ARCHER 03703 03803 04003 04303 AT amp T 04503 BELL SOUTH 02003 BIRMINGHAM CABLE COMMUNICATIONS 00803 BRITISH TELECOM 00103 CABLETENNA 03703 CABLEVIEW 03703 CENTURY 04303 CITIZEN 04303 COGECO 04503 COMCAST 04503 COMTRONICS 03103 CONTEC 03503 DAERYUNG 00203 01403 01903 DIRECTOR 01303 FILMNET 01203 GARRARD 04303 GC ELECTRONICS 03803 GENERAL INSTRUMENT 00103 00803 01303 01703 GENERAL INSTRUMENT 02803 04503 04703 04803 GOLDSTAR 00503 HAMLIN 00303 00703 HITACHI 04703 JASCO 04303 JERROLD 00103 00803 01303 01703 02803 04203 04703 LG 00503 MAGNAVOX 03203 MEMOREX 00003 MNET 01203 MOTOROLA 00803 01303 01703 02303 02803 04503 04703 04803 MOVIE TIME 03603 NOKIA 04903 NOOS 01803 NSC 03603 OAK 03503 03903 PACE 00603 02203 PANASONIC 00003 00203 00403 02703 PARAGON 00003 PHILIPS 01003 01103 03203 04303 PHILIPS MAGNAVOX 03003 03303 PIONEER 00503 01603 01903 PULSAR 00003 PVP STEREO VISUAL MATRIX 00103 QUASAR 00003 RADIO SHACK 03003 03303 03403 RCA 02403 02503 04303 REALISTIC 03803 REGAL 00703 00903 REMBRANDT 04703
79. a asmunq B 23 p Enjoying 2 channel sources 3 in surround 22 0 insiso tssis 24 Playing back 5 1 channel sources in m 7 1 channel surround 24 EM uquy assia 25 Tuning into the desired FM station Frequency tuning 2 22 25 Registering FM stations and tuning in Preset tunine 25 SIRIUS Satellite Radio tuninsg 26 Listening to Satellite 2 26 Connecting the SiriusConnect tuner 26 Activating SIRIUS Satellite Radio subscription 27 SIRIUS Satellite Radio operations gt Registering SIRIUS Satellite Radio channels 5 Setting the Parental Lock D Displaying the SIRIUS Satellite Radio information 30 g Playing back iPodTM iPhoneTV 30 z 3 En 4 En INTRODUCTION Digital Sound Projector The Digital Sound Projector technology allows one slim unit to control and steer multiple channels of sound to generate multi channel surround sound thus eliminates the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems This unit also employs the beam modes that let you enjoy the surround sound 5 Beam Stereo 3 Beam 3 Beam for 5 1 channel audio 5 Beam plus 2 Stereo 3 Beam plus 2 3 Beam for 7 1 channel audio and 2 channel st
80. after step 1 or in the middle of step 2 within 30 seconds S Transmission indicator flashes 5 times and the setting mode is canceled Resetting all remote control codes While holding down CODE SET press OSETUP A Transmission indicator flashes twice Release OCODE SET Press Numeric keys to enter 99999 Each time you press the MNumeric keys A Transmission indicator flashes once Once the remote control code is entered properly S Transmission indicator lights up for approximately 2 seconds and then the initialization is completed If one of the other keys is pressed S Transmission indicator flashes 5 times and the initialization is canceled APPENDIX Troubleshooting Refer to the chart below when this unit does not function properly If the problem you are experiencing is not listed below or if the instruction below does not help set this unit to the standby mode disconnect the AC power supply cable and contact the nearest authorized Yamaha dealer or service center General Problem Cause Remedy See page This unit does not operate The internal microcomputer has been frozen Disconnect the AC power supply cable from 12 properly by an external electric shock such as the outlet and plug it in again after about 30 lightning or excessive static electricity or seconds by a power supply with low voltage This unit fails to turn on The AC powe
81. al audio signals for reproduction Choices Auto DTS Select Auto to automatically select audio input signals Select DTS to selects DTS signals only Other input signals are not reproduced FM Mode FM receiving mode Use to set the FM broadcasting receiving mode Choices Stereo Mono Select Stereo to receive in stereo mode by priority Select Mono to receive in monaural mode Auto Preset Automatic preset Use to automatically detect FM radio stations and registers them as preset stations page 25 Clear Preset Clear preset station Use to clear the preset FM stations page 26 or preset SIRIUS Satellite Radio channels page 29 ParentalLock Parental lock Use to limit access to the desired SIRIUS Satellite Radio channels page 29 Displaying the input signal information Use to display information of the sampling frequency video signal type and resolution for each input source on the front panel display 1 Select an input source TV AUX1 2 and HDMI1 4 and then press INFO 2 Press INFO repeatedly to change items to be displayed Sampling frequency Audio Sampling The sampling frequency per second in analog to digital conversion Video signal Video Signal In Signal type and resolution of video input signal SETTINGS Customizing this unit SET MENU You can manually configure various settings for this unit in SET MENU
82. ame This program is suitable for role playing and adventure games It utilizes the sound field effects for movies to represent the depth and spatial feeling of the field during play while offering movie like surround effects in the movie scenes in the game Mch Stereo This program downmixes multi channel source to 2 channels and then outputs the sound from all speakers and produces stereo sounds in wide range It is ideal for background music at parties etc Changing the audio output method for surround playback You can set the number of beam output channels and audio output method 1 Press OSETUP The SET MENU screen appears on the TV 2 Use 7 and GENTER to select SOUND OUT MENU SOUND BEAM OUT CONFIG CHANNEL OUT 3 Press lt gt to select the number of output channels Choices 5 1ch 7 1ch Initial setting 7 1ch Press lt 7 to select BEAM MODE Press V to select the desired audio output method 6 To exit from the menu press SETUP Beam modes for 5 1 5Beam cL 6 Outputs sound beams from the front right and left center and surround right and left channels This mode is ideal for enjoying surround sound effects to the fullest when you watch 5 1 channel audio discs amp Outputs normal sound from the front right and left channels and sound beams from the center and surround right and left channels This mode is ideal for watchine liv
83. anual is produced prior to production Designs and specifications are subject to change in part as a result of improvements etc In case of differences between the manual and the product the product has priority CONTENTS z E 2 fe O 2 Useful features 31 INTRODUCTION Adjusting volume level automatically UniVolume 31 Features sense 4 Using the HDMI control 31 General operation flow 5 Using the sleep 31 Controls and functions 6 Configuring settings for each input source Front panel d 6 Option menu ua EE 32 U Front panel display ertet tite 7 Displaying tne input signal information 32 m Rear panel gt Remote control gt Customizing this unit SET MENU PREPARATION SET MENU items eene Installation aa 10 Basic SET MENU Operation Connections 12 MANUAL SETUP ERR ae SOUND SET MENE emmener ore 2 2 2 SOUND 448 2 ms kil e 2 13 INPUT MENU u am DISPLAY MENU ttn Connecting the FM antenna
84. ary DTS Digital Surround glossary DTS Neo 6 glossary DTS HD High Resolution Audio glossary DTS HD Master Audio glossary is Dynamic range control SOUND SET MENU 37 Dynamic range of Dolby Digitaland DTS signals Dynamic range control 12 37 E ENHANCER indicator 7 ENTER key controlling external component ENTER key Remote control ENTERTAINMENT CINEMA DSP program Entertainment CINEMA DSP program Error messages AUTO SETUP External amplifier using External component connection External component control External component operation keys controlling external component 42 External component operation keys Remote control 9 EF F DISPLAY SETUP DISPLAY MENU F PANEL KEY ADVANCED SETUP FACTORY PRESET ADVANCED SETUP Factory preset ADVANCED SETUP FM antenna connection FM ANTENNA jack FM Mode option menu FM receiving mode option menu FM tuner troubleshooting een FM tuning Frequency tuning FM tuning Front panel PER 6 Front panel display IILI Sasa Front panel display setup DISPLAY MENU Front panel input key ADVANCED SETUP Front panel key ADVANCED SETUP FRONT PRE OUT jacks Front SP Size Sound output re Front speaker size for PRE OUT Sound output 38 E Game CINEMA DS
85. atellite Radio tuning CEt TAE E D MOVEAV Id Playing back iPod Useful features SONILLAS XIGNAddV 21 En 8880 8 0 YAMAHA amp CINEMA DSP BOFF STEREO SURROUND GAIT 4 SETUP 22 En Status Indicator When PCM signals are being PCM Input When Dolby TrueHD signals are ced TRUE HD being input When Dolby Digital Plus signals E DIGITAL PLUS are being input When Dolby Digital signals are 27 22 You can select audio signal to be played back Auto or DTS In Decoder Mode page 32 Input channel indicators Center Surround back Front LL T3 RE Front R Surround LSL SB SR Surround R Extra 1 1 LFE EX2 Extra 2 When DTS ES matrix is selected as the surround decoder dits ES MTRX When DTS 6 is selected as the surround decoder dits Neo 6 beinp pot DIGITAL IFE When Dolby Pro Logic is Du selected as the surround decoder PL Depending on the channel component of the current em digital input signal the input channel indicators in the 2 ds DOPLI front panel display light up as follows When Dolby Pro Logic IIx is DOPLIx Input signal Indicator selected as the surround decoder 2 channel stereo When DTS HD Master Audio HD MSTR signals are
86. ation digital audio signals 49 Multi information display Shows information with alphanumeric characters when you adjust the parameters of this unit Current input source and audio output method are displayed when this unit is turned on Input channel indicators The channel component of the current input signal is displayed page 21 z c o a NOILVHVd3Hd s3univ3ad MOVEAV 1d SONILLAS XIGNAddV 7 8 En Rear panel FRONT sur sac FMANTENNA RS 232C The rear panel illustration shows jacks and their names to help you find them easily They are not exactly the same as the ones on the actual rear panel of this unit HDMI jacks Connect your HDMI components page 12 FM ANTENNA jack Connect the FM antenna page 14 3 VIDEO jacks Connect to the video jacks of your external components page 12 SUBWOOFER jack Connect your subwoofer page 13 5 AUDIO IN jacks Connect to the analog audio output jacks of your external components page 12 6 SIRIUS antenna jack Connect a SiriusConnect tuner sold separately page 26 DIGITAL IN jacks Connect to the digital audio output jacks of your external components page 12 IR IN terminal This is a control expansion terminal for
87. center and surround back right and left channels Surround right and left channel sounds are output by using front right and left channel sound and surround back right and left sound beams This mode is ideal for watching live recordings on a DVD 3 Beam 4 A 6 Outputs sound beams from the front right and left and center channels For playback of multi channel sources surround right and left and surround back right and left channel sources are mixed into the front right and left channels This mode is ideal for enjoying movies with the whole family In addition you can use this mode when the listening position is close to the backside of the wall Enjoying 2 channel sources in surround sound This unit can decode 2 channel sources for 7 1 channel or 5 1 channel playback so that you can enjoy a variety of surround sound effects by switching the decoder The decoders are available only when surround playback page 22 is selected Available decoders vary depending on the CHANNEL setting page 23 Press WSUR DECODE repeatedly to switch between decoders 2ch 5ch Recommended Decoder source Pro Logic Dolby Pro Logic Movie Movies Dolby Pro Logic IT Music Music Game Games Neo 6 Cinema Movies DTS Neo 6 Music Music 2ch 7ch Recommended Decoder source PLIIx Movie Movies Dolby Pro Logic Music Music IIx Game Games Neo 6 Cinema Movies DTS Neo
88. cks according to the component to be used 38 Svstem y INPUT RENAME Renames the displayed input source 38 configurations HDMI SETUP Configures the HDMI settings 39 ADVANCED SETUP WIRELESS SETUP Configures the wireless settings 39 Using an external DISPLAY MENU F DISPLAY SETUP Configures the front panel display settings 39 amplifier OSD SETUP Configures the OSD settings 40 LANGUAGE SETUP Changes the language used in the OSD 40 Controlling external UNIT SETUP Changes the display unit of measurement 40 components 33 En NOILONGOULNI NOILVHVd3Hd CEt TAE E D MOVEAV Id XIGNAddV MOVE MUSC TANMENT OFF 8800 8 0 YAMAHA input selector keys ENTER lt 7 4 Ov DRETURN DSETUP 34 En Basic SET MENU operation 1 Press OSETUP AUTO SETUP MAHUA MEMORY curi ENTER 1 Enter 2 Press A lt 7 to select the desired menu and then press OENTER 137 2 To return to the previous menu press DRETURN 3 Press 7 7 b and GENTER to configure each parameter The initial settings are marked with The menu screen disappears if one of the Input selector keys is pressed while the SET MENU is being configured To exit from the menu press OSETUP MANUAL SETUP Use this menu to manually adjust the parameters related to the sound
89. commercial use only SYSTEM CONNECTOR terminal Use to connect a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal to this unit page 13 RS 232C terminal This is a control expansion terminal for commercial use only AC IN Connect the supplied power cable page 12 IR OUT terminal This is a control expansion terminal for commercial use only 49 PRE OUT jacks Connect your external amplifier page 41 Remote control wove muse TANMENT OFF g pr UE YAMAHA When operating the keys located on the slide cover INFO SLEEP etc close the slide cover completely before operation Transmission indicator Lights up when infrared control signals are being output TV Turns on the power of your TV or set it to the standby mode page 42 AV Turns on the power of the selected component or set it to the standby mode page 42 Power D key Turns on the power of this unit or set it to the standby mode page 21 D Input selector keys Use to select an input source page 21 An input source key currently selected lights up when the remote control is operated B CINEMA DSP program keys Select the CINEMA DSP programs page 22 SURROUND STEREO Switches between surround and stereo playback page 22 Cursor A 7 P keys ENTER Select and adjust menu items TOP MENU Displays the
90. during channel category selection When you select the category the first channel in the category is selected Light up SIRIUS CATEGORY Category name als 2 If you do not operate within 10 seconds the Category Search mode is automatically canceled 2 While the CATEGORY indicator lights up press TUNING A v repeatedly to search for a channel within the selected channel category E A You can search for a channel quickly by pressing and holding PTUNING A This unit skips the channels when this unit is in the AII Channel Search mode or Category Search mode in the following cases it is not malfunction of this unit the channel is locked page 29 the channel is out of service you do not subscribe to the channel Direct number access In the All Channel Search mode or Category search mode press the Numeric keys to enter the desired three digit channel number For example to enter the number 123 press the Numeric keys as 1 2 and 3 display the Sirius ID number displayed on the front panel display select channel 0 To enter a one digit or two digit channel number press the Numeric keys on the remote control and then press BENT to confirm the input number Instead of pressing MENT to tune into the channel immediately you can wait a few seconds until this unit confirms the entered channel number f no key is pres
91. e control DTS 96 24 DTS 96 24 offers an unprecedented level of audio quality for multi channel sound on DVD video and is fully backward compatible with all DTS decoders 96 refers to a 96 kHz sampling rate compared to the typical 48 kHz sampling rate 24 refers to 24 bit word length DTS 96 24 offers sound quality transparent to the original 96 24 master and 96 24 5 1 channel sound with full quality full motion video for music programs and motion picture soundtracks on DVD video DTS Digital Surround DTS digital surround was developed to replace the analog soundtracks of movies with a 6 channel digital sound track and is now rapidly gaining popularity in movie theaters around the world DTS Inc has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home This system produces practically distortion free 6 channel sound technically left right and center channels 2 surround channels plus an LFE 0 1 channel as a subwoofer for a total of 5 1 channels The unit incorporates a DTS ES decoder that enables 6 1 channel reproduction by adding the surround back channel to existing 5 1 channel format DTS Neo 6 Neo 6 decodes the conventional 2 channel sources for 6 channel playback by the specific decoder It enables playback with the full range channels with higher separation just like digital discrete signal playback Two mode
92. e operation 1 2 The reception is noisy the sound is hard to listen switch to monaural mode to get better reception In the option menu select Mono in FM Mode page 32 Registering FM stations and tuning in Preset tuning You can register up to 40 FM stations automatically or manually Registering stations automatically The tuner automatically detects FM stations with strong signals and registers up to 40 stations 1 2 Press ORADIO repeatedly to select FM Press OPTION The option menu page 32 appears on the front panel display Press A lt 7 to select Auto Preset and then press ENTER This unit starts to preset FM radio stations in 5 seconds Preset number Frequency You can select the preset number at which the preset starts by pressing V after pressing ENTER To cancel the operation press RETURN If auto preset is complete Preset Complete appears To exit from the menu press OPTION Registering stations manually You can manually register FM stations with weak signals 1 2 Tune into the desired FM station Press MEMORY Manual Preset appears on the front panel display followed soon by the preset number to which the station will be registered als 22 By holding down for more than 2 seconds you can skip the following steps and automat
93. e recordings on a DVD Stereo 3Beam es n 6 1 NOILVHVdHd Playback Playback mode FM tuning SIRIUS Satellite Radio tuning CEt TAE E D MOVEAV Id Playing back iPod Useful features SONILLAS XIGNAddV 23 En MOVE MUSC TANMENT OFF ma J Foc 9 0 6 0 9 UNVOLUME SUR DECODE NTELUBEA 30000 38890 3 9 080 E 0 0 00 YAMAHA ORADIO ENTER 2 DOPTION RETURN SUR DECODE Numeric keys TUNING A OMEMORY 24 En Outputs sound beams from the front right and left and center channels For playback of multi channel sources surround right and left channel sources are mixed into the front right and left channels This mode is ideal for enjoying movies with the whole family In addition you can use this mode when the listening position is close to the backside of the wall Beam modes for 7 1ch 5BeamPlus2 Outputs sound beams from the front right and left center and surround back right and left channels Surround right and left channel sources are mixed into the front right and left and surround back right and left channels This mode is ideal for enjoying surround sound effects to the fullest when you watch 7 1 channel audio discs ST 3BeamPlus2 Outputs normal sound from the front right and left channels and sound beams from the
94. e top stand or floor stand the stands may not be necessary Using a rack You can install this unit either above or under your TV ina commercially available rack It should be large enough to allow adequate ventilation space around this unit and strong enough to support the weight of both this unit and your TV When this unit is installed above your TV TV This unit JA When this unit is installed under your TV 10 En Using a wall mount bracket You can use the optional wall mount bracket such as SPM K30 to mount this unit on the wall in your listening room Attachment of the wall mount bracket refer to the owner s manual supplied with the wall mount bracket Wall mount bracket MES E This unit SSSS esse TV Dimensions when using SPM K30 YSP 5100 26 t 355 4 355 150 seen set eres sssssssse EE 6249722 o BH s eee lec 2 47 4 730 mm YSP 4100 mm E Using a table top stand or a floor stand You can mount both your TV and this unit on a commercially available table top stand or floor stand ideal installation condition Object such as furniture Parallel installation with 5Beam Corner installation with Stereo 3Beam
95. eam microphone to this unit and place it in a proper location IntelliBeam microphone 1 Connect the supplied IntelliBeam Upper limit microphone to the INTELLIBEAM MIC jack on Center height of z this unit the front panel i d Within 1 m 3 3 ft ithin 1 m 3 3 ft microphone stand Listening 1 8 m 6 0 ft position H n or more Lower limit INTELLIBEAM MIC 2 Place the IntelliBeam microphone on a flat level surface at your normal listening position Place the IntelliBeam microphone on the extended center line of this unit and 1 8 m 6 0 ft or more away from it Also make sure place the IntelliBeam microphone within 1 m 3 3 ft upper or lower from Center line i E the center height of this unit IntelliBeam B Cardboard microphone microphone stand Changing OSD language AUTO SETUP T Using the system memory 15 n NOILONGOULNI s3univ3ad MOVEAV 1d SONILLAS XIGNAddV 90 Cw Qua Que ENTER MOVE MUSC TANMENT OFF TVVOL iil UNVOLUME SUR DECODE INTELLBEAM 98990 38000 8 8669 0 8 0 CEG YAMAHA Qs DRETURN DSETUP MINTELLIBEAM 16 En Assembling the supplied cardboard microphone stand Remove Place horizontally 3 Fit in 4 Li Run through
96. ed ON factory preset 1 0 W or less Dimensions W x Hx D YSP 5100 Maximum dimension 1200 x 212 x 90 mm 47 1 4 x 8 3 8 x 3 1 2 in With stands 1200 x 214 x 110 7mm 47 1 4 x 8 3 8 x 4 3 8 in YSP 4100 Maximum dimension 1030 x 212 x 90 mm 40 1 2 x 8 3 8 x 3 1 2 in With stands 1030 x 214 x 110 7mm 40 1 2 x 8 3 8 x 4 3 8 in Weight YSP 5100 11 0 kg 24 2 Ibs YSP 4100 10 0 kg 22 0 Ibs Specifications are subject to change without notice HDMI interface of this unit is based on the following standard HDCP High bandwidth Digital Content Protection System licensed by Digital Content Protection LLC List of remote rol codes TV ACCENT 14801 16201 ACCUPHASE 16201 ACTION 14701 14801 15401 ACURA 00101 ADDISON 01201 01601 08401 ADMIRAL 01301 02201 05801 14701 14801 15001 15201 18601 ADVENT 09601 ADYSON 14701 15401 AEA 15701 16201 AGB 06801 AIKO 01201 14801 15701 16201 AIM 15701 16201 AIWA 16901 17101 17701 18301 AKAI 00101 00301 02901 04601 06801 08901 10501 14701 14801 15401 15701 16201 16701 AKIBA 15701 16201 AKITO 15701 16201 AKURA 03701 14701 14801 15701 16201 ALBA 00101 00401 04801 08501 14701 14801 15701 16201 ALFA 14701 ALLSTAR 14701 15701 16201 AMERICA ACTION 02701 AMPRO 09401 AMSTRAD 00101 00401 02501 0480
97. effective Enjoying CINEMA DSP programs This unit is equipped with a Yamaha CINEMA DSP digital sound field processing chip containing several sound field programs used to enhance your playback experience Most of the CINEMA DSP programs are precise digital recreations of actual acoustic environments of famous concert halls music venues and movie theaters ata gt q When you enjoy the CINEMA DSP programs press SURROUND to select the surround playback and then follow the steps below The CINEMA DSP programs are not available in the following conditions Stereo playback is selected HD audio signals are being played back Audio signals with sampling frequency of higher than 96 kHz are being played back Audio signals are output from the PRE OUT jacks 1 Press the desired CINEMA DSP key The CINEMA DSP category name appears in the front panel display and the CINEMA DSP indicator page 7 lights up 2 While the category name is displayed press the OCINEMA DSP key repeatedly Each time you press the key program switches To turn off the CINEMA DSP program press OFF Movie MOVIE Sci Fi This program clearly reproduces dialogs and special sound effects of the latest science fiction films and lets you feel a broad and expansive cinematic space Adventure This program reproduces the thrilling environment of the latest action films and lets you feel the dynamic and excitemen
98. ereo playback HDMI High Definition Multimedia Interface HDMI input x 4 HDMI output x 1 HDMI interface for standard enhanced or high definition video Gncluding 1080p video signal transmission as well as multi channel digital audio based on HDCP Automatic audio and video synchronization lip sync information capability Deep Color video signal transmission capability x v Color video signal transmission capability High definition digital audio format signals capability Multi channel Linear PCM signal capability Simple and easy connections with HDMI supported external components Functional link which enables the remote control of your TV to control this unit with an HDMI control compatible TV Power mode switch capability on standby Volume adjustment capability TV sounds reproduce device selection capability this unit TV AUTO SETUP IntelliBeam This unit employs the automatic sound beam and acoustic optimization technology with the aid of the supplied IntelliBeam microphone You can avoid troublesome listening based speaker setup and achieve highly accurate sound beam adjustments that best match your listening environment Cinema DSP This unit employs the Cinema DSP technology developed by Yamaha Electronics Corp that lets you experience movies at home with all the original dramatic sound impact UniVolume This unit employs the automatic volume adjustment function You can limit the
99. eset operation press RETURN 3 Press PPRESET to select a preset number to which the selected channel is registered You can also select a preset number using the Numeric keys If you select a preset number being used currently registered channel number appears next to the preset number the current preset channel will be overwritten 4 Press MEMORY Calling a preset channel Preset Search mode Prior to selecting a preset channel in the Preset Search mode you must preset SIRIUS channels For details see Registering preset channels on this page Press PPRESET Y repeatedly to change the preset channel number 1 to 40 SIRIUS Clearing preset channels You can clear the assignments of preset SIRIUS Satellite Radio channels 1 Press OOPTION on the remote control The option menu for SIRIUS appears on the front panel display 2 Press A V repeatedly to select Clear Preset and then press SIRIUS Preset number Channel name Mr AOA e To cancel the clearing operation press RETURN 3 Press A lt to select the preset number to reset and then press OENTER The selected preset number is reset To reset another preset number repeat step 3 To exit from the menu press DOPTION Setting the Parental Lock You can use the Parental Lock feature to limit the access to the desired SIRIUS Satellite channels
100. g 0 OSD BACK COLOR OSD background color Use to select the background color of the OSD Choices Blue Gray Black Purple Red LANGUAGE SETUP Language setup SET MENU DISPLAY MENU LANGUAGE SETUP Use to select the language used in the OSD Choices ENGLISH English DEUTSCH German Francais French ESPANOL Spanish ITALIANO Italian NEDERLANDS Dutch Russian Initial setting ENGLISH English UNIT SETUP Unit Setup SET MENU DISPLAY MENU UNIT SETUP Use this to change the display unit of measurement Choices METERS FEET Select METERS to enter distances in meters Select FEET to enter distances in feet If you change this setting the adjusted sound beam settings may change System configurations ADVANCED SETUP This unit has additional menus that are displayed in the front panel display These menus offer additional operations to adjust and customize the way this unit operates 1 Press Power 5 key to set this unit to the standby mode 2 While holding down INPUT on the front panel press Power 1 key on the remote control Keep holding down INPUT until ADVANCED SETUP appears on the front panel display INPUT O Pur voume D Press DSETUP Press A to select the desired menu and then press Example when DEMO MODE is selected Mr T
101. ge sports including play by play games from select leagues and teams Additional programming includes expert sports talk uncensored entertainment comedy family programming local traffic and weather and news from your most trusted sources Once you ve purchased a SIRIUS tuner you ll need to activate it and subscribe to begin enjoying the service Easy to follow installation and setup instructions are provided with the SIRIUS tuner There are a variety of programming packages available including the option of adding The Best of XM programming to the SIRIUS service The Best of XM service is not available to SIRIUS Canada subscribers at this time Please check with SIRIUS Canada for any updates using the numbers and web address below Family friendly packages are also available to restrict channels featuring content that may be inappropriate for children To subscribe to SIRIUS U S and Canadian customers can call 1 888 539 SIRI 1 888 539 7474 or visit sirius com US or siriuscanada ca Canada Connecting the SiriusConnect tuner Connect the SiriusConnect tuner sold separately to the SIRIUS jack on the rear panel of this unit For details see the operating instructions provided with the SiriusConnect tuner SiriusConnect Tuner and the antenna sold separately To AC wall outlet als To ensure optimal reception of SIRIUS Satellite Radio signals the antenna of the SiriusCon
102. he FM antenna Connect the supplied FM antenna or your antenna to the FM ANTENNA jack on this unit Antenna Preparing the remote control Before installing batteries or using the remote control make sure that you read precautions on the remote control and batteries in Safety and Accessory Information separate booklet Installing batteries in the remote control Pull and hold 1 Pull and hold the tab on the battery cover and then open the cover 2 Insert the two supplied batteries RO3P UM4 AAA into the battery compartment Make sure you insert the batteries according to the polarity markings 3 Close the battery cover Operation range of the remote control The remote control transmits a directional infrared beam Use the remote control within 6 m 20 ft of this unit and point it toward the remote control sensor of this unit during operation Within 6m 20ft Changing OSD language You can select an OSD language among English German French Spanish Italian Dutch and Russian Before operating the following steps select this unit as the video input on your TV 1 Press and hold SETUP until the 2 Press OZ lt to select the desired LANGUAGE SETUP menu appears on your language and then press ENTER TV Choices ENGLISH English DEUTSCH German Francais French ESPANOL Spanish ITALIANO Italian NEDERLANDS Dutch 3 ENGLISH
103. iPhone and PDX 50TX and then start playback When you start playback of your iPod iPhone this unit automatically operates as follows When this unit is on this unit selects iPod as the input source When this unit is in the standby mode this unit turns on and selects iPod as the input source You can also select the input source with OiPod To adjust the volume level use the volume control on the iPod iPhone or VOLUME on this unit This unit automatically turns to the standby mode in the following conditions The iPod iPhone is disconnected from PDX 50TX The iPod iPhone is turned into sleep mode Useful features Registering HDMI components to TV Adjusting volume level automatically UniVolume This function adjusts the volume level of the TV so that it will not increase suddenly when whenever the contents being broadcast change due to commercials etc Press MUNIVOLUME The UNIVOLUME indicator lights up on the front panel display To turn off UniVolume function press UNIVOLUME again We recommend turning off the UniVolume function during playback of music Using the HDMI control function You can operate the following functions of this unit with the remote control of your TV when the TV HDMI control function supported is connected to the HDMI OUT jack of this unit Turning on this unit or to the standby conjunction with TV
104. ically register the selected station to an empty preset number next to the lastly registered preset number Playback Playback mode SIRIUS Satellite Radio tuning Playing back iPod Useful features 25 En NOILONGOULNI NOILVHVd3Hd SAYNLVAd MOVEAV Id SONILLAS XIGNAddV YAMAHA RADIO ENTER 2 DOPTION RETURN Numeric keys 90 DENT BCATEGORY A 7 MEMORY PRESET Z TUNING 26 En 3 Press PRESET to select the preset number to which the station will be registered When you select a preset number to which no station is registered Empty appears When you select a preset number to which any station has been already registered the frequency of the station is displayed MEMORY Preset number Mz You can also specify a preset number using the Numeric keys 4 Press MEMORY When registration is complete the front panel display returns to the original state ale gt lt To cancel registration press QDRETURN or leave this unit without any operations for about 30 seconds Calling a preset station Preset tuning You can call preset stations registered automatically or manually Press PRESET to select the desired preset number Preset numbers to which no stations are registered are skipped No Presets is displayed if no sta
105. l display setup Auto dimmer Front panel display setup ts AUTO LIP SYNC Audio delay 220000242222 Auto Preset option menu AUTO SETUP E AUTO SETUP Error messages eee Automatic lipsync Audio delay Automatic preset option menu AUX1 2 Audio delay AV button Remote control AV key controlling external component E B BASS EXT indicator cetero teer trien 7 BASS EXTENSION SOUND SET MENU 37 Bass extension SOUND SET MENU BASS OUT Subwoofer settings Bass out Subwoofer settings Bass sound output redirection Sound output s BEAM ADJUSTMENT MANUAL SETUP Beam adjustment MANUAL SETUP Beam mode 5 1ch Beam mode 7 1ch Blu ray disc player connection 12 C cardboard microphone stand assemble Category Search mode SIRIUS Satellite Radio CENTER PRE OUT jack Center SP Size Sound output m Center speaker size for PRE OUT Sound output 38 CH key controlling external component CH keys Remote control CHANNEL LEVEL SOUND SET MENU Channel level SOUND SET MENU CINEMA DSP indicator CINEMA DSP program keys Remote control CINEMA DSP programs Clear preset station option menu Clear Preset option menu eee CODE SET key controlling external component CODE SET key Remote control Concert Hall CINEMA DSP program
106. l this unit and connect to other components Installation page 10 Connections page 12 Run AUTO SETUP to optimize the beam and sound settings AUTO SETUP IntelliBeam page 15 Play back a source Playback page 21 Change the playback method surround stereo CINEMA DSP and or beam modes settings Playback mode page 22 Configure this unit s settings and or set remote control codes Customizing this unit SET MENU page 33 Controlling external components page 42 z E 2 fe O 2 NOILVHVd3Hd s3univ3ad MOVEAV 1d SONILLAS XIGNAddV 5 En 6 En Controls and functions Front panel VOLUME b INTELLIBEAM MIC Remote control sensor Receives infrared signals from the remote control page 14 Power LED Lights up when the power is turned on page 21 3 Front panel display Shows information about the operational status of this unit page 7 INPUT Press repeatedly to switch between input sources 5 VOLUME Controls the volume level of all audio channels Control range MIN minimum 01 to 99 MAX maximum Power 1 key Turns on the power of this unit or sets it to the standby mode page 21 In the standby mode this unit consumes a small amount of power in order to receive infrared signals from the remote control or to search for HDMI signals INTELLIBEAM MIC jack Connect the supplied
107. mware Wait until the updating is complete SUB UPDATED The subscription information is updated B Remote control Problem Cause Remedy The remote control does work Wrong distance angle The remote control functions within a maximum 14 and or function properly range of 6 m 20 ft and no more than 30 degrees off axis from the front panel Direct sunlight or lighting from an inverter type of Reposition this unit fluorescent lamp etc is striking the remote control sensor of this unit The batteries are weak Replace all batteries 14 Cannot operate external The external component you want to operate is not Press the desired OInput selector key to select the 42 components with the remote selected as the input source external component you want to operate control of this unit The remote control code was not correctly set Set the remote control code correctly or try another 42 code for the same manufacturer using the List of remote control codes Even if the remote control code is correctly set there Use the remote control supplied with the external are some models that do not respond to the remote component control B iPod Problem Cause Remedy See page No sound PDX 50TX is connected to another device Select the same group ID as selected on this unit PDX 50TX and this unit are not connected since they Set both PDX 50TX and this unit to the same group 39 are set to different grou
108. n feature in the following cases f you have opened or closed the curtains in your listening room before using this unit Ifyou have manually set the beam angle This menu takes about three minutes It is normal for loud test tones to be output during the AUTO SETUP procedure Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress Make sure that your listening room is as quiet as possible For accurate measurement turn off air conditioner or other devices that make noises To achieve the best results possible vacate your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound beams If there are curtains in your listening room we recommend following the procedure below 1 Open the curtains to improve sound reflection 2 Run BEAM OPTIMZ ONLY 3 Close the curtains 4 Run SOUND OPTIMZ ONLY ata To return to the previous screen while using SET MENU press DRETURN 1 Press SETUP The remote control keys to be used and available operations in each step are displayed at the bottom of the screen LEN a Tiles Dower 1 Enter vie 2 You can also start BEAM SOUND OPTIMZ procedure simply by holding down WINTELLIBEAM for more than two seconds In this case proceed to step 4 2 Press Q x7 to select AUTO SETUP and then pre
109. nect tuner must be placed at or near a window with no obstacles in the path to the sky The orientation of the antenna for the best reception differs depending on the area Refer to the instruction manuals supplied with the SiriusConnect tuner for the installation of the antenna You can mount it indoors or outdoors Use the Antenna Level information in the front panel display page 30 to check the antenna reception level and adjust the orientation of the antenna You need to connect the SiriusConnect tuner to an AC wall outlet If ANTENNA ERR appears on the front panel display the connection of the SiriusConnect tuner or antenna is incorrect In such cases check the connection of the SiriusConnect tuner and the antenna Activating SIRIUS Satellite Radio subscription Before using the SIRIUS Satellite Radio feature you need to activate your SIRIUS Satellite Radio subscription To activate the subscription you need the Sirius ID which is uniquely assigned to the SiriusConnect tuner Sirius ID is 12 digit number and it appears on the package of the SiriusConnect tuner on the label of the SiriusConnect tuner and when you tune into the SIRIUS Satellite Radio channel 0 see below B Displaying the Sirius ID of your SiriusConnect tuner 1 Press ORADIO repeatedly to select SIRIUS 2 Press 0 and then WENT to display the Sirius ID of your SiriusConnect tuner 000 Sirius ID and
110. nit page 32 9 n z NOILVHVd3Hd s3univ3ad MOVEAV 1d SONILLAS XIGNAddV PREPARATION Installation This section describes a suitable installation location to install this unit using a wall mount bracket a rack a table top stand or a floor stand To achieve desired surround sound effects install this unit where there are no objects such as furniture obstructing the path of sound beams page 11 Depending on your installation environment connections with external components page 12 should be done before installation Make sure you leave an adequate amount of ventilation space so that heat can escape We recommend installing this unit using a wall mount bracket a rack a table top stand or a floor stand Be sure to install this unit where it will not fall subject to vibrations such as from an earthquake and where it is out of the reach of children When using a cathode ray tube CRT TV do not install this unit directly above your TV f the picture on your TV screen becomes blurred or distorted we recommend moving this unit away from your TV Attach the stands Attach the supplied stands to this unit as shown below Make sure that you attach the left and right stands correctly These stands are unnecessary if you use the optional wall mount bracket Right stand supplied Left stand supplied Screws for stands supplied Depending on a rack tabl
111. nit press DHDMII 3 Start playback of the player 4 Mute the sound output on the TV gt lt If your player supports the HD audio check whether the audio output setting on the player is set to the value which supports HD audio output Auto Bitstream etc If your player does not support the HD audio check whether the audio output setting on the player is set to multi channel linear PCM f your player is connected to this unit through the digital connection check whether the audio output setting on the player is set to digital output Bitstream Dolby Digital DTS etc To enhance the surround sound effect set the audio setting of your player to the multi channel audio mode You can use the supplied demonstration DVD to check the digital signals being input from the player through the digital connection HDMI optical or coaxial The OO DIGITAL indicator lights up when this unit detects the digital audio signal input Muting audio output 1 Press amp MUTE to mute the audio output 2 Press MUTE again to resume audio output Decoder and input channel indicators B Decoder indicators Depending on the input source and the selected decoder the indicators in the front panel display light up as follows NOILONGOULNI Changing OSD language AUTO SETUP IntelliBeam Using the system memory Playback Playback mode FM tuning SIRIUS S
112. o return to the previous screen press RETURN 5 Press P to select the desired parameter 6 Press Power 5 key to set this unit to the standby mode The new setting will be reflected when you turn on this unit next time The initial settings are marked with TURN ON VOLUME Volume level at power on Set the initial volume level when the power of this unit is turned on Control range OFF 01 to 99 MAX Maximum MAX VOLUME SET Maximum volume setting Set the maximum volume level so that this unit will not output sound beyond the limited volume level Control range 01 to 99 MAX Maximum PANEL INP KEY Front panel input key Select whether or not to enable the INPUT key on front panel key To disable the operations select P INPUT OFF Choices P INPUT ON P INPUT OFF F PANEL KEY Front panel key Select whether or not to enable front panel key operations except ADVANCED SETUP operations To disable the operations select F PANEL OFF Choices PANEL ON FPANEL OFF R INPUT POWER Power on by remote control input keys Select whether or not to automatically turn on this unit when you select an input source on the remote control To enable the function select R INPUT PW ON Choices R INPUT PW OFF R INPUT PW ON AC ON STANDBY Standby after AC on Set this unit to the standby mode when the AC power is recovered after the power to this unit was lost temporally
113. oading settings Low frequency effect level for PRE OUT Sound output Low frequency effect level Subwoofer settings M MANUAL SETUP asan assawaphsispawsansiwpaypwy 34 MAX VOLUME SET ADVANCED SETUP 40 Maximum volume setting ADVANCED SETUP 40 Mch Stereo CINEMA DSP program MEMORY PROTECT ADVANCED SETUP Memory protect ADVANCED SETUP MENU key controlling external component MENU key Remote control MOVIE CINEMA DSP program Movie CINEMA DSP program Multi information display MUSIC ENHANCER SOUND SET MENU Music Video CINEMA DSP program MUSIC CINEMA DSP program Music CINEMA DSP program MUTE key Remote control Muting audio output E N Numeric keys controlling external component 42 Numeric keys Remote control 1 0220 9 BH O Operation range remote control s 14 OPTION key Remote control OSD BACK COLOR OSD setup OSD background color OSD setup OSD language change OSD SETUP DISPLAY MENU OSD setup DISPLAY MENU OSD SHIFT OSD setup OSD shift OSD setup P PANEL INP KEY ADVANCED SETUP 40 Parallel installation placement Parental lock input signal information ParentalLock input signal information 32 PCM indicator PCM glossary 48 Playback e 21
114. of the listening room and the distance between this unit and rear wall 0 ar When this unit is installed at the corner of 4 gt the room specify the y width of length of the listening room D In SETTING PARAMETERS 3 3 configure the distance settings Specify the distance between the listening position and this unit When this unit is installed parallel to wall you also need to specify the distance between the listening position and left wall Control range from this unit 1 8 m to 9 0 m 6 0 ft to 30 0 ft Control range from left wall 0 6 m to 11 4 m 2 0 ft to 38 0 ft FLAT TO WALL lt 0 6 to 11 4 m 1 8 to 9 0 2 0 to 38 0 ft 6 0 to 30 0 ft BEAM ADJUSTMENT Beam adjustment SET MENU MANUAL SETUP BEAM ADJUSTMENT Use to manually adjust the various sound beam settings The BEAM ADJUSTMENT parameters are automatically adjusted except Center in FOCAL LENGTH if you run the AUTO SETUP page 15 or if you configure SETTING PARAMETERS page 34 Depending the beam mode settings page 23 some channel positions may not be available for selection In this case is displayed If you change BEAM ADJUSTMENT settings while playing back your iPod iPhone connected to PDX 50TX the subwoofer connected to SWK W 10 outputs the iPod iPhone audio We recommend stopping the iPod iPhone playback during the beam adju
115. ol function 1 Iw SUPPORT AUDIO Support audio Use to select a component to play back HDMI audio signals This setting is effective only when HDMI CONTROL is set to OFF als 22 HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT jack Choices Model name of this unit OTHER Select this unit to play back HDMI audio signals on this unit Select OTHER to play back HDMI audio signals on the component connected to the HDMI OUT jack AUDIO SELECT Audio select Select whether or not to output HDMI audio signals input to each HDMI IN jacks This function is useful when you want to enjoy another audio input source while watching HDMI video sources For example if you set HDMI1 of AUDIO SELECT to OFF and OPTICAL1 of INPUT ASSIGNMENT to HDMI page 38 you can enjoy the audio source input to the DIGITAL IN AUX 1 jack while watching the HDMI video source input to HDMI IN 1 jack Choices OFF ON HDMI CONTROL HDMI control Use this function to link this unit and an HDMI control compatible TV via HDMI For details see Using the HDMI control function page 31 Choices OFF ON Select OFF to turn off the HDMI control function The standby consumption power of this unit decreases Select ON to turn off the HDMI control function WIRELESS SETUP Wireless setup SET MENU INPUT MENU WIRELESS SETU
116. onal FM antenna tuned into with the automatic tuning method Use the manual tuning method 25 Previously preset stations can no This unit has been disconnected for a long period Preset the stations again 25 longer be tuned into SIRIUS Satellite Radio Status message Cause Remedy See page ANTENNA ERR The antenna is not connected to the SiriusConnect Check the connection of the antenna and 26 tuner properly SiriusConnect tuner SIRIUS LOADING This unit is communicating with the SiriusConnect The message disappears normally within several tens tuner of seconds CHECK TUNER The SiriusConnect tuner is not connected to the Check the connection of the SiriusConnect tuner and 26 SIRIUS jack of this unit correctly this unit The SiriusConnect tuner is not connected to the AC Connect the power cable of the SiriusConnect tuner to 26 44 En See Status message Cause Remedy page ACQUIRING The signal is too weak Adjust the orientation of the antenna of the SiriusConnect tuner Use the Antenna Level information on the front panel display to check the antenna reception level UPDATE The SiriusConnect tuner is updating the channellist Wait until the updating is complete The period of the subscription is end Contact SIRIUS Satellite Radio to renew the 27 subscription FW UPDATING The SiriusConnect tuner is updating the fir
117. ontrol see 9 SIRIUS antenn jack scsssscissssossessesesssasevsescrscasaesssesesses 8 SIRIUS indicators 7 SIRIUS PIN ADVANCED SETUP SIRIUS Satellite Radio channel registration SIRIUS Satellite Radio PIN ADVANCED SETUP 41 SIRIUS Satellite Radio subscription activation SIRIUS Satellite Radio troubleshooting SIRIUS Satellite Radio tuning SiriusConnect tuner connection SLEEP indicator SLEEP key Remote control 022000 9 BIOS TIME 31 SOUND BEAM OUT CONFIG SOUND OUT MENU sn 37 Sound beam output configuration SOUND OUT MENU nese 37 SOUND OUT MENU SOUND OUT SOUND OUT MENU Sound output redirection Sound output Sound output SOUND OUT MENU SOUND SET MENU Specifications Spectacle CINEMA DSP program Sports CINEMA DSP program ST 3BeamPlus2 beam mode Stand attachment installation STANDARD DIMMER Front panel display setup Standard dimmer Front panel display setup Standby after AC on ADVANCED SETUP s STEREO key Remote control sees 9 Stereo 3Beam beam mode Subwoofer connection e SUBWOOFER jack sn 8 SUBWOOFER PRE OUT jack SUBWOOFER SET SOUND SET MENU Subwoofer settings SOUND SET MENU SUPPORT AUDIO HDMI setup Support audio HDMI setup SUR BACK PRE OUT jacks SUR DECODE key Remote control SUR
118. ork Problem Cause Remedy page Suddenly this unit produces This unit is connected to another device Change the group ID of this unit 39 sounds even though an iPod or iPhone is not connected The iPod iPhone interlock function iPod Interlock is set to OFF Set iPod Interlock to ON 39 46 En B Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi channel audio With 3 front channels left center and right and 2 surround stereo channels Dolby Digital provides 5 full range audio channels With an additional channel especially for bass effects called LFE low frequency effect the system has a total of 5 1 channels LFE is counted as 0 1 channel By using 2 channel stereo for the surround channels more accurate moving sound effects and surround sound environment are possible than with Dolby Surround The wide dynamic range from maximum to minimum volume reproduced by the 5 full range channels and the precise sound orientation generated using digital sound processing provide listeners with excitement and realism previously unheard of With this unit any sound environment from monaural up to a 5 1 channel configuration can be freely selected for your enjoyment B Dolby Digital Surround EX Dolby Digital EX creates 6 full bandwidth output channels from 5 1 channel sources For the best results Dolby Digital EX should be used with movie s
119. ound tracks recorded with Dolby Digital Surround EX With this additional channel you can experience more dynamic and realistic moving sound especially with scenes with fly over and fly around effects B Dolby Digital Plus Dolby Digital Plus is an advanced audio technology developed for high definition programming and media including HD broadcasts and Blu ray Disc Selected as an optional audio standard for Blu ray Disc this technology delivers multichannel sound with discrete channel output Supporting bitrates up to 6 0 Mbps Dolby Digital Plus can carry up to 7 1 discreet audio channels simultaneously Supported by HDMI version 1 3 and designed for the optical disc players and AV receivers amplifiers of the future Dolby Digital Plus also remains fully compatible with the existing multichannel audio systems that incorporate Dolby Digital B Dolby Pro Logic Il Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround software This new technology enables a discrete 5 channel playback with 2 front left and right channels 1 center channel and 2 surround left and right channels instead of only 1 surround channel for conventional Pro Logic technology Music and Game modes are also available for 2 channel sources in addition to the Movie mode B Dolby Pro Logic Ilx Dolby Pro Logic IIx is a new technology enabling discrete multichannel playback from 2 channel or multi channel sources
120. progress ERROR E 4 The IntelliBeam microphone is not Make sure that the IntelliBeam 15 Please check MIC position MIC placed in front of this unit microphone is installed in front of this should be set in front of the unit unit and re try ERROR E 5 The IntelliBeam microphone is not Make sure that the IntelliBeam 15 Please check MIC position MIC placed in the right distance from this microphone is installed more than 1 8 m should be set above 1 8m 6 0ft unit 6 0 ft from the front of this unit and re try within 1 m 3 3 ft from the center height of this unit ERROR E 6 The IntelliBeam microphone cannot Make sure that the IntelliBeam 15 ERROR E 7 Unexpected error happened Please re try An internal system error occurred Repeat the AUTO SETUP procedure Using the system memory You can save the current beam and sound settings in the system memory of this unit It is handy to save certain settings according to the varying conditions of your listening environment For example if there are curtains in the path of sound beams the effectiveness of the sound beams will vary depending on whether the curtains are open or closed If there are curtains in your listening room we recommend following the procedure below 1 While the curtains are open run BEAM SOUND OPTIMZ page 16 and then save the settings to MEMORY 1 2 While the curtains are closed run SOUND OPTIMZ ONLY page 16
121. ps Wireless Function is set to No Set Wireless Function to Yes 39 Distance is too far Move PDX 50TX closer to this unit There is a device microwave oven wireless LAN Move this unit away from the device If the device is etc outputting signals in 2 4 GHz frequency band TEEE802 11n compliant change the channel setting nearby of the device so as not to affect the unit The iPod or iPhone is not connected to PDX 50TX Connect the iPod or iPhone firmly firmly The firmware of the iPod or iPhone is not updated Download the latest iTunes software to update the firmware of the iPod or iPhone The signal from PDX 50TX is blocked by your body Change the way of holding orientation or position of or metallic objects etc PDX 50TX to avoid the object blocking the signal The battery of iPod or iPhone is low Charge the iPod or iPhone The iPod or iPhone is in the process of connecting Please wait for a while with this unit The protection circuitry has been activated by Turn down the volume 21 excessive volume Controlling volume on the iPod or The iPod or iPhone being used is not supported by Use an iPod or iPhone supported by this unit 30 iPhone does not work this unit The iPod or iPhone is not connected to PDX 50TX firmly Connect the iPod or iPhone firmly 45 En NOILONGOHINI NOILVHVdHd S34N1V31 MOVEAV 1d SONILLAS XIGNAddV See does not w
122. r supply cable is not firmly Connect the AC power supply cable firmly 12 when Power 0 key is connected to the AC wall outlet to the AC wall outlet pressed or enters the cues 4 m standby mode soon after the is unit has Xen exposed to a strong Set this unit to the standby mode disconnect power has been turned on external electric shock such as lightning the AC power supply cable plug it back in and strong static electricity after 30 seconds and use it normally This unit suddenly enters The internal temperature becomes too high Wait for about one hour for this unit to cool the standby mode and the overheat protection circuitry has down and turn it back on been activated The sleep timer has turned the unit off Turn on the power and play back the source 21 again No sound Incorrect input or output cable connections Connect the cables properly If the problem 12 persists the cables may be defective No appropriate input source has been Select an appropriate input source with 21 selected INPUT or Input selector keys The volume is turned down Turn up the volume 21 The sound is muted Press MUTE or VOLUME to 21 resume audio output and adjust the volume level The signals this unit cannot reproduce such Play a source whose signals can be as PCM signals with more than 96 kHz of reproduced by this unit sampling frequency are being received from the source component Change the system settings of the source
123. s unit The parenthetic references displayed in the menu screen indicate the initial settings See also AUDIO SELECT page 39 als 2 Press 57 to proceed to the next page AUDIO1 Select the key to which the AUDIO IN TV jacks are assigned Choices TV AUX1 AUX2 HDMI1 HDMI2 HDMI3 HDMI4 The input already selected in AUDIO is not displayed To set the input selected in AUDIO2 change AUDIO2 parameter and then reconfigure AUDIO2 Select the key to which the AUDIO IN AUX 1 jacks are assigned Choices AUX1 AUX2 HDMI1 HDMD HDMI3 HDMI4 TV The input already selected in AUDIO1 is not displayed To set the input selected in AUDIO1 change AUDIO1 parameter and then reconfigure OPTICAL1 Select the key to which the DIGITAL IN TV jack is assigned Choices TV AUX1 AUX2 HDMI1 HDMD HDMI3 HDMI4 The input already selected in OPTICAL2 or COAX is not displayed To set the input selected in one of these parameters change the corresponding parameter and then reconfigure OPTICAL2 Select the key to which the DIGITAL IN AUX 1 jack is assigned Choices AUX1 AUX2 HDMI1 HDMI2 HDMI3 HDMI4 TV The input already selected in OPTICAL1 or COAX is not displayed To set the input selected in one of these parameters change the corresponding parameter and then reconfigure COAX Select the key to which the DIGITAL IN AUX 2
124. s are available Music mode for playing music sources and Cinema mode for movies DTS HD High Resolution Audio DTS HD High Resolution Audio is a high resolution audio technology developed for high definition disc based media including Blu ray Disc Selected as an optional audio standard for Blu ray Disc this technology delivers sound that is virtually indistinguishable from the original offering a high definition home theater experience Supporting bitrates up to 6 0 Mbps for Blu ray Disc DTS HD High Resolution Audio can carry up to 7 1 discrete channels of 24 bit 96 kHz audio simultaneously DTS HD High Resolution Audio also remains fully compatible with the existing multichannel audio systems that incorporate DTS Digital Surround DTS HD Master Audio DTS HD Master Audio is an advanced lossless audio technology developed for high definition disc based media including Blu ray Disc Selected as an optional audio standard for Blu ray Disc this technology delivers sound that is bit for bit identical to the studio master offering a high definition home theater experience Supporting bitrates up to 24 5 Mbps for Blu ray Disc DTS HD Master Audio can carry up to 7 1 discrete channels of 24 bit 96 kHz audio simultaneously Supported by HDMI version 1 3 and designed 47 En NOILONGOULNI NOILVHVd3Hd s3univ3ad MOVEAV 1d SONILLAS XIGNAddV for the optical disc players and AV receivers amplifiers of the future DTS
125. sed within a few seconds after you enter a one digit or two digit number this unit automatically confirms the entered channel number If the selected channel is locked appears on the front panel display Enter the four digit Parental Lock code number by using the Numeric keys or press ENT to cancel page 29 f the selected channel is not available an advisory message may appear For details see SIRIUS Satellite Radio page 44 in Troubleshooting Registering SIRIUS Satellite Radio channels You can use this feature to store up to 40 SIRIUS Satellite Radio channels You can then recall any preset channel easily by selecting the preset channel number as described in Calling a preset channel Preset Search mode on this page B Registering preset channels 1 Search a channel you want to set as a preset channel in one of the SIRIUS Satellite Radio search modes For details see SIRIUS Satellite Radio operations page 27 SIRIUS 2 Press MEMORY The MEMORY indicator lights up on the front panel display Light up Currently registered channel number or if empty SIRIUS MEMORY Preset number Channel number By holding down MEMORY for more than 2 seconds you can skip the following steps and automatically register the selected channel to an empty preset number next to the lastly registered preset number To cancel the pr
126. ss ENTER Press A V to select BEAM SOUND OPTIMZ BEAM OPTIMZ ONLY or SOUND OPTIMZ ONLY and then press ENTER PREPARATION amp ase connect the MIL ase place the at least Eft awaa from the unit m Cn u om 1 T a H A F i ITem IT Lm Prepare to leave the room The best setting may not be done if you are in the room Prepare to leave the room in 10 seconds after pressing ENTER in step 5 Wait outside the room during the AUTO SETUP procedure The AUTO SETUP procedure takes about 3 minutes To cancel the AUTO SETUP procedure after it is started press RETURN Press to start the AUTO SETUP procedure and then leave the room within 10 seconds Will begin in asec Please leave the room RETURN Cancel a The setup screen automatically changes during the AUTO SETUP procedure If an error occurs an error buzzer sounds and an error message is displayed For details on error messages see Error messages for AUTO SETUP page 18 If the AUTO SETUP procedure is complete this unit rings the chimes MERSUREMEHT COMPLETE BEAM MODE 5 Plus SUBWOOFER VES 1 Save set ur 1 not save set uF als 22 If ENVIRONMENT CHECK FAILED is displayed refer to Error messages for AUTO SETUP page 18 press DRETURN and then run the AUT
127. stment 1 Configure HORIZONTAL ANGLE Adjust the horizontal angle of sound beams for each channel using test tones Adjust toward L left to move the direction of the output to the left and adjust toward R right to move it to the right Control range L90 to R90 27 22 Press 57 to switch the channels 2 Configure VERTICAL ANGLE Adjust the vertical angle of sound beams for each channel using test tones Adjust toward minus to move the angle downward and adjust toward plus to move the angle upward Control range 45 to 45 3 Configure BEAM TRAVEL LENGTH Adjust the distance that sound beams travel after being output and reflected off the wall until they arrive at the listening position so that all sounds can arrive at the listening position at the same time Configure this setting only when you have adjusted HORIZONTAL ANGLE Control range 0 3 m to 24 0 m 1 0 ft to 80 0 ft lt The length of each arrow indicates the beam travel length ey 4 Configure FOCAL LENGTH Adjust the distance from the front of this unit to the focal point of output for each channel to achieve an expansive feeling for each channel Adjust toward minus to move the focus outward widen the sweet spot and adjust toward plus to move the focus toward the normal position narrow the sweet spot point Sweet spot N Control range 1 0 m to 13 0 m 3
128. t channels automatically CROSS OVER Crossover When BASS OUT is set to SUBWOOFER you can use this feature to select a crossover cutoff frequency for all low frequency signals All frequencies below the selected frequency will be sent to the subwoofer position Choices 80Hz 100Hz 120Hz LFE LEVEL Low frequency effect level Adjust the output level of the low frequency effect LFE channel according to the capacity of your subwoofer This setting is effective only when this unit decodes Dolby Digital or DTS signals Choices 20 dB to 0 dB DISTANCE Distance Adjust the distance of the subwoofer from the listening position Choices 0 3 m to 15 0 m 1 0 ft to 50 0 ft Initial setting 3 0 m 10 0 ft AUDIO DELAY Audio delay SET MENU SOUND SET MENU AUDIO DELAY Use to adjust delay in output timing between video signals and audio signals AUTO LIP SYNC Automatic lipsync Select whether to automatically adjust the audio output delay when a TV that supports the automatic lipsync is connected to the HDMI OUT jack of this unit Choices ON OFF Select ON if the TV connected to the HDMI OUT jack of this unit supports the automatic lipsync The audio output delay is automatically adjusted Select OFF if the TV connected to the HDMI OUT jack of this unit does not support the automatic lipsync or you want to disable the automatic lipsync You can manually adjust the audio output delay in
129. t from the VIDEO IN VIDEO jack can be output not only to the VIDEO OUT jack but also the HDMI OUT jack Video signals input from the VIDEO IN COMPONENT jacks are output to the HDMI OUT jack Connecting a subwoofer Wireline connection Connect the monaural input jack on your subwoofer to the SUBWOOEFER jack on this unit SYSTEM CONNECTOR System connector v Monaural input als gt e If the subwoofer is connected by using a system type connection changing the power mode of this unit controls the power mode of the subwoofer Yamaha subwoofer Wireless connection You can make a wireless connection of your subwoofer by using the Yamaha wireless subwoofer kit SWK W10 About SWK W10 refer to Safety and Accessory Information separate booklet See also WIRELESS SETUP page 39 2 2 rp Ly Subwoofer DES SWK W10 E a For proper transmission you need to set the group IDs of this unit and SWK W10 to the same value For the Group ID settings refer to Group ID page 39 and Safety and Accessory Information separate booklet Be sure to use the product only in the country in where it was purchased 13 En NOILONGOHINI D gt gt d 2 SAYNLVAA MOVEAV Id SONILLAS XIGNAddV TVVOL CH VOLUME YAMAHA ENTER QA SETUP 14 En Connecting t
130. t of fast moving scenes Spectacle This program reproduces the wide and grand environment and lets you have added impressions on spectacular scenes with strong visual impacts Music MUSIC Music Video This program produces a vibrant environment and lets you feel as if you are at an actual jazz or rock concert Concert Hall This program creates a rich surround effect of a large round concert hall with a great deal of presence emphasizing the extension of sounds and lets you feel as if you are seated close to the center of the stage Jazz Club This program recreates the acoustic environment of The Bottom Line a famous jazz club in New York once and lets you feel as if you are seated right in front of the stage Entertainment ENTERTAINMENT Sports This program reproduces the energetic environment of live sports broadcasting converging a commentator s voice on the center and broadening the overall atmosphere of the stadium and lets you feel as if you are seated at an actual stadium or a ball park Talk Show This program reproduces excitement of live talk shows It enhances the ambience of gaiety while keeping the conversations at a comfortable volume Drama This program stables reverberations that match a wide range of movie genres from serious dramas to musicals and comedies and offers an optimum 3D feeling reproducing effects tones and background music softly but cubically around clear words G
131. te Radio page 44 Press INFO repeatedly to toggle the following SIRIUS Satellite Radio information display modes Lors Antenna Level Antenna reception level Display example SIRIUS If the SIRIUS Satellite Radio information contains character that cannot be recognized by this unit the character will be displayed with a space When the antenna of the SiriusConnect tuner cannot receive the signals ACQUIRING appears on the front panel display When an information is unavailable appears Playing back iPod iPhone By using the Yamaha wireless transmitter for iPod PDX SOTX PDX 50BC you can use the iPod iPhone as remote control and enjoy playback of your iPod iPhone on this unit About PDX 50TX PDX 50BC refer to Safety and Accessory Information separate booklet See also iPod Interlock page 39 This unit supports the following iPod iPhone models iPod 5th generation iPod classic iPod touch iPod nano iPhone iPhone 3G Be sure to use the product only in the country in where it was purchased This unit does not support iPod 4th generation or before iPod without Dock connector iPod photo and iPod mini You cannot run the AUTO SETUP while playing back the iPod iPhone by using PDX 50TX To run the AUTO SETUP stop playback and then disconnect the iPod iPhone from PDX 50TX Connect your iPod
132. ternal AV component you are using you may not be able to operate the component with the remote control even if a remote control code is set In this case operate the component using the supplied remote control You can control external components using the following keys on the remote control of this unit by setting the appropriate remote control codes page 49 Before operating the control keys press one of the Input selector keys to select an external component to be controlled TVO Turns on the power of your TV or set it to the standby mode AVO Turns on the power of the selected component or set it to the standby mode Cursor 7 P keys ENTER Use to select menu items TOP MENU Displays the top menu of a Blu ray disc or DVD MENU Displays the menu of a Blu ray disc or DVD D RETURN Returns to the previous menu screen 2 5 Switches between available channels for your external component TV operation keys TV VOL Adjusts the audio output level of your TV TV MUTE Temporarily mutes audio output from your TV TV INPUT Switched the input source for your TV 9 Numeric keys Use to enter numeric digits or specify a channel number 0 CODE SET Sets remote control codes for external component operations page 42 External component operation keys Use to control playback of your external component 1 v The BTV b and operation keys always work regardless
133. the procedure below ERROR E 1 Press ENTER to run the AUTO SETUP procedure again or RETURN to cancel the operation Other errors Press RETURN to cancel the operation and then run the AUTO SETUP procedure again If the problem is difficult to be solved configure the settings manually in MANUAL SETUP page 34 Volume level is lower than expected Please check MIC position connection and re try collect the sound produced by this unit because the sound output level is too low microphone is firmly connected to this unit and placed in a proper location If the problem persists contact the nearest authorized Yamaha service center for assistance See Error message Cause Remedy page ERROR E 1 There is too much unwanted noise in Make sure that your listening room is as Please test in quieter environment your listening room quiet as possible You may want to choose certain hours during the day when there is not much noise coming from outside ERROR E 2 The IntelliBeam microphone is not Connect the IntelliBeam microphone to 15 No MIC detected Please check connected to this unit or disconnected this unit firmly MIC connection and re try during the AUTO SETUP procedure ERROR E 3 Some other operations were performed Do not perform any other operations Unexpected control is detected on this unit while the AUTO SETUP while the AUTO SETUP procedure is in Please re try procedure was in progress
134. tions are registered You can directly select a preset number by pressing the Numeric keys while calling a preset station When you press DNumeric keys during normal frequency tuning a frequency is entered Set the tuner to the preset tuning mode using TUNING A V prior to the operation Clearing preset stations Use to clear the preset FM stations 1 Press ORADIO repeatedly to select FM 2 Press DOPTION The option menu page 32 appears on the front panel display 3 Press A 7 to select Clear Preset and then press A preset station is displayed Preset station e To cancel the clearing operation press RETURN 4 Press to select a preset station to be cleared and then press ENTER The selected preset station is cleared If the operation is completed Cleared appears To clear the multiple preset stations repeat step 4 5 To exit from the menu press OPTION SIRIUS Satellite Radio tuning Listening to Satellite Radio To listen to Satellite Radio you ll need to connect a SIRIUS Satellite Radio tuner sold separately to your Sirius Ready receiver SIRIUS Satellite Radio is available to residents of the US except Alaska and Hawaii and Canada Satellite Radio delivers a variety of commercial free music from categories ranging from Pop Rock Country R amp B Dance Jazz Classical and many more plus coverage of all the top professional and colle
135. u ray disc or DVD player as the input source of this unit to check the video input In case the HDMI control function does not work check the followings Also turning off unplug and turning on plug the TV may be effective HDMI CONTROL is set to ON on this unit page 39 The HDMI control function is enables on the TV If you changed the connection method or connected components repeat steps 1 3 Using the sleep timer Use this feature to automatically set this unit to the standby mode after a specified period of time 1 Press SLEEP repeatedly to set the interval for the sleep timer The SLEEP indicator page 7 flashes in the front panel display while switching the interval for the sleep timer Wait for a few seconds without operating this unit to confirm the setting for the sleep timer The SLEEP indicator lights up in the front panel display indicating that the sleep timer is activated If this unit is set to the standby mode the sleep timer setting is canceled Playback Playback mode FM tuning SIRIUS Satellite Radio tuning Playing back iPod Useful features 31 En NOILONGOULNI NOILVHVd3Hd MOVEAV Id SONILLAS XIGNAddV MOVE MUSC TANMENT OFF Gena DSF 8800 8 0 YAMAHA input selector keys ENTER AXIS DOPTION BINFO 32 En

Yamaha YSP-4100BL Owner's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents