X10 Wireless Technology IR18A User's Manual
Contents
1. TM IconRemote Single User Owner s Manual Model IR18A Table of Contents TEE OQUC HOD i v Pot EE Qu 3 B tton PUnctoDs uai cere rA Yvan arida 4 DVD SAT Functions 6 SOUD M 7 Battery Installation 7 Ballery SAVED 7 SAVED scsedasiuitppaeitg d eire POTERE 7 Power On Default 7 Code SOLUDL eder aem auer PRU Pup 7 Direct Code Entty iai preis unai 8 Code SG AUC ne 9 Code Identification 9 Setting Favorites 10 Adjusting Delay Between Digits 11 CUI E 12 Programming Combo Device Codes 12 VCR DVD DVR Punch Through Feature 12 Volume Mute Control Feature 12 Setting Volume Mute Punch Through 13 Setting Mode to Use Own Volume Mute 13 Code D GUERRE 14 Tips Oth 14 IR Transmitter Finder 16 Learning Commands 17 Clearing Commands sias scence sss rdc 18 Clearing Learned Commands 18 Master Cleat ispirarsi nisiyi 18 19 Troubleshooting 19 2 Introduction Congratulations on your purch2. remote that feature would no longer work for your new CD player piss When in a mode that has been programmed for DVD INPUT performs the DVD setup function If you want to remove or clear one or more learned ds do the following When in a mode that has been programmed for SAT INPUT performs theTV SAT switch function 1 Pressand hold SETUP until the indicator remains on then release SETUP 2 Press and release SELECT to select the mode you fedi ea TN e Press and release LEARN twice The indicator blinks Troubleshootin 9 off 4 Press and release SETUP The indicator turns off All learned commands under that mode are now cleared d Remote does not operate your product 1 Select the mode for the product you want to control 2 Program the remote with a new code 3 Install new batteries in the remote You might have to reprogram your remote after installing new Master Clear To Clear All Learned batteries Commands Under All Modes 4 Ifthese steps do not work the remote might not be compatible with your product 1 Pressand hold SETUP until the indicator remains on then release SETUP Remote does not operate some features of 2 Press and release LEARN twice The indicator blinks your product off 3 Press and release SETUP The indicator turns off All 1 Program remote with a new code learned commands in the remote are now cleared 2 Ifthis does not work your remote might not be able to oper
3. Ts 6 001019 SI Note If you can t find sticker for one of your favorites go to www wikipedia org to find labels for your favorites Do a search by using the key words television logos Find the logo you need Right click the logo and save this logo somewhere on your computer Print the logo If the logo needs adjustment you can use Microsoft Paint etc Cut out the logo and paste it next to your FAVORITE button Adjusting the Delay Between Digits You might need to adjust the time between digits sent for a favorite channel If the delay is too long you might point the remote away from your device before all the digits have been sent If the delay is too short your device might not respond 1 Press and hold SETUP until the indicator remains on then release SETUP 2 Pressandrelease PLAY The indicator blinks then stays on 3 Press and release a number from 0 to 9 0 is no delay and 9 is the longest delay 11 Programming Combo Device Codes Some combo combination devices TV VCR TV DVD DVD VCR etc require you to set up 2 different modes to control both parts of the combo For example if you have a TV DVD combo you might need to set up one code under the TV mode to control the TV and a separate code under other modes to control the DVD VCR DVD DVR Punch Through Feature This remote allows the 6 VCR buttons PLAY PAUSE STOP SCAN SCAN and REC to punch
4. 8 Tips On Learning cont e Keys that you normally give a quick press like the numbers and channel up down will likely require a quick press when learning If after learning say the channel up key you find that it changes multiple channels when pressed once try relearning it with a short key press If learning the first or second keys results in continuous errors then try the following 1 Check that the IR transmitters sensors are correctly aligned between the two remotes see next page 2 Adjust the distance between the two remotes to be closer 1 2 an inch or further away 2 inches from each other Try learning the original remote keys again If problems reoccur with the same button check the original remote key being learned does it transmit Does it operate the target device 5 Clear all learned settings and try learning again Aw If problems reoccur with the same button check the original remote button being learned to see if there is transmission Try learning that button under a different cleared mode if necessary If the remote learns then this situation is likely a different code type from others and cannot be learned under the same mode IR Transmitter Finder This feature assists you in identifying where your original remote s infrared IR transmitter is located This feature is particularly useful if your original remote s IR transmitter is hidd
5. to learn for instance POWER Point your original remote at the bottom of your new remote until they are about 1 inch apart Press and hold the original remote button for instance Power until the indicator blinks once then stays on If there is a learning problem the indicator blinks for 3 seconds and stays on If this happens repeat Steps 4 to 6 Repeat Steps 4 6 for other buttons you want your remote to learn Press and release SETUP when all desired remote commands are learned Code learning is now complete VCR DVD CBL AUX ott Power 5 C Select 4 20 Cet Ke Menu Guide Info Exit OF 7 SUBTITLE REPEAT SET uP TAPE TUNER Line up your remotes that you re learning from in front of the learning remote on a hard surface approx 1 inch apart 17 Clearing Commands INPUT To Clear All Learned Commands Under a When in TV mode INPUT performs the INPUT source Mode switch function When in a mode that has been programmed for VCR learing 1 d ds is helpful if 1 n Dd M DS INPUT performs the TV VCR antenna switch function your CD player with another brand or model for example If your remote had learned a feature such as RANDOM PLAY from yourold CD player s original When in a mode that has been programmed for Cable INPUT performs the A B switch function
6. ase of this Universal Remote Control You are now the proud owner of a revolutionary remote that remembers your favorite channels for you Press an icon button and you re instantly taken to your favorite channel Universal Remotes let you replace a broken or lost remote or combine more than one remote into one In addition this remote is equipped with a command learning feature which lets the remote learn commands from your original equipment remote control This remote control operates the common features of most but not all models and brands of IR Infrared Controlled Video Equipment This remote may provide functions that are not available on your equipment Some functions of your particular equipment e g menu functions may not be controlled by this remote In such cases use the original remote control for your equipment Please use this manual to become familiar with your Universal Remote After you are familiar with your remote the first thing you need to do is to install batteries and setup your remote for your particular product and brand Thank you for buying this remote and we hope it will give you many years of service 12 Month Limited Warranty X10 com a division of X10 Wireless Technology Inc X10 warrants X10 products to be free from defective material and workmanship for a period of one 1 year from the original date of purchase at retail X10 agrees to repair or replace at its sole discretion a defective X10
7. ate all features of your product or the button names might be different than your product s Indicator blinks after you program a product code 1 This means the remote did not accept the code 2 Try to program the code again or try a different code 18 19 10 A Division X10 WinELESS TECHNOLOGY INC 3824 5TH Sr Suite C Nort Las Vecas NV 89032 WEB Site HTTP www x10 com IR18A 03 08 H
8. en behind a lens 1 Point your remotes so that the top of your existing remote faces the bottom of your new remote and the remotes are about 1 inch apart see picure on next page 2 Press and hold SETUP until the indicator remains then release SETUP 3 Repeatedly press and release SELECT to select the desired mode TV VCR etc 4 Press and release LEARN the indicator blinks then stays on 5 Press and hold any original remote button and move the original remote to the left and right and or up and down in front of the IR transmitter Note1 The indicator will remain if there is not any IR from the original remote The indicator will blink on and off more rapidly when the IR transmitters are lining up The point where the indicator blinks most rapidly is where the two IR transmitters are aligned Note2 Some original remotes only transmit IR on the initial button press and then stop transmitting IR Quickly press and release the original remote button repeatedly during this procedure in such cases 2 1111 2 Learning Commands The learning feature lets your remote learn functions from your original remote control Press and hold SETUP until the indicator remains on then release SETUP Repeatedly press and release SELECT to select the desired mode VCR etc Press and release LEARN the indicator blinks then stays on Press and release the button that you want
9. he Satellite Menu screen use with the UP DOWN LEFT and RIGHT navigation buttons OK is used for on screen menu selection EXIT is used to exit or clear on screen menu displays e Battery Installation 1 Onthe back of the remote push down on the tab and lift the cover off 2 Match the batteries to the and marks inside the battery case then insert 2 AAA Alkaline batteries 3 Press the battery cover back into place Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds This will save your batteries should your remote get stuck in a place where the buttons remain depressed e g or for instance between the sofa cushions Code Saver Codes are stored in permanent memory while you are changing batteries so that you will not lose any codes stored in the remote while you are changing batteries Power On Default The remote powers on in TV mode Code Setup Please refer to Code Search on p 8 for more informa tion using the code search feature to learn how to search through the library of codes for your products Note You can store any kind of code under any mode except TV You can store a VCR code under the CBL button or a DVD code under the VCR button etc However you can only store TV codes under the TV button 1 Press and hold SETUP until the indicator remains then release SETUP Repeatedly pres
10. or blinks then stays on 4 Press and release MUTE the indicator turns off Note The indicator will blink rapidly for 3 seconds if the mode you have selected does not have Volume Mute control 5 All other modes will now punch through to your chosen mode for Volume Mute control Setting Any Mode to Use its Own Volume Mute Control You can set any mode to use only its own Volume Mute control Note If your chosen mode does not have Volume Mute functions then this remote s VOLUME and MUTE will not operate 1 Press and hold SETUP until the indicator remains on then release SETUP 2 Press and hold MUTE until the indicator blinks off then release the button 3 Press and release SELECT to select the desired mode VCR etc the indicator blinks then stays on 4 Press and release VOLUME down the indicator blinks then stays on Press and release MUTE the indicator turns off All modes will now punch through to the respective modes you have chosen for Volume Mute control NM Your remote is equipped with an easy learning feature that lets it learn features such aa RANDOM PLAY from your original CD remote Tips On Learning You can only learn one device type under any one mode button e g only learn TV codes under the TV mode VCR codes under the VCR mode etc If you are trying to learn from a universal type o
11. ources antenna cable box VCR etc 24 SELECT For TV VCR DVD Cable CBL or Auxiliary device 25 POWER Turns device on or off Button Functions cont DVD Functions SCAN and SCAN control fast forward and reverse CHAPTER and CHAPTER locate chapters or tracks on disc LAST REPEAT performs Repeat or RPT A B for repeat play of current chapter or track INFO brings up DVD Display or Control Menu for chapter track title number time remaining elapsed indication system information etc MENU brings up the DVD disk menu screen use with UP DOWN LEFT and RIGHT OK is used for on screen Menu selection SUBTITLE CC Turns subtitles on or off EXIT Exit on screen menus and or return to previous on screen selection Note Not all DVD Players support all functions de scribed above Your remote operates most but not all models and brands of infrared IR controlled video equipment This remote might provide functions not available on your equipment Some functions like menus might not be controlled by this remote In such cases use the original remote control for your equip ment SAT Functions GUIDE displays on screen Satellite Channel Guide CHAPTER and CHAPTER perform the and Page function for on screen guide menus used by some satellite systems INFO brings up Satellite Display screen for current channel and system information MENU brings up t
12. product if returned to X10 within the warranty period and with proof of purchase If service is required under this warranty Call 1 800 442 5065 or visit www x 10 com or e mail support x10 com For help or more information setup please visit http www x10 com support 3 Button Functions 1 25 Power C Select 2 lt L MJ 24 7 ll J 2 TUP LEARN TUNER VIDEQ 2 SCAN PAUSE Note REC must be pressed twice to record from your VCR For some VCR brands you might need to press REC once then press it again for 3 seconds Some buttons on the remote might have functions that are referred to by different names on the device you are controlling These differences depend upon the brand and model of your product Also this remote can only operate features that exist on your product A 18 SET 17 6 16 en 15 14 Button Functions cont 17 18 19 20 21 22 23 TV VCR DVD CBL AUX Indicates which equipment is operating press SELECT for mode from AUX to TV TV to VCR etc FAVORITES BUTTONS Allow you to choose your favorite channels Key feature amp benefit FAVORITES ICONS Display icons of your favorite channels Key feature amp benefit GUIDE Displays on screen program or channel guides Displa
13. riginal remote it might have more than one code type stored under a mode Try learning from another remote to see if there s a problem with the type or band of remote you are trying to learn from Keep the following in mind about learning codes e Some functions from some types of remotes might not be able to be learned e No functions may be learned under the LEARN SETUP and SELECT keys e Use fresh batteries for both your new remote and your original remote e Keep at least 3 feet away from incandescent or low energy lights when learning e Place the original remote end to end with your new remote so the IR transmitter at the top on your original remote points at the IR learning device on the bottom of your new remote e Keep the distance between the two remotes to approximately 1 inch Lineup the remotes and then press the key you want to learn To get the correct range press the key on the remote you are learning Do not change the distance between the two remotes until you have learned all the required keys e When Learning do not release the button being Learned until the indicator has blinked off for half a second However some keys might be learned multiple times if you do this If this happens just tap the key you want to learn rather than press and hold it For example keys that you normally hold down for awhile like volume up or down will likely require a long press when learning 1111
14. s SELECT to select the desired mode TV VCR etc unless the desired mode is already selected Enter the 4 digit code from the code tables on separate sheet Note After a valid code entry the indicator turns off For an invalid code the indicator flashes Press CHANNEL UP If the device responds no further programming is required Note If some buttons do not operate your equipment try one of the other codes for your brand N ya Write your codes down here for easy reference later 1111 8 Code Search If your product does not respond after you have tried all the codes for your brand or if your brand is not listed try searching for your code by following these steps 1 Turn on the device TV VCR etc to be controlled 2 Press and hold SETUP until the indicator remains on then release SETUP 3 Repeatedly press SELECT to select the desired mode TV VCR etc unless the desired mode is already selected 4 Press CHANNEL UP repeatedly up to 300 times until the device to be controlled changes channels The indicator blinks off with each button press 5 Press and release MUTE to install the code Most users store VCR codes under VCR Cable codes appear under CBL Cable etc If you want to store a VCR code under CBL first follow the procedure for Direct Code Entry and select CBL in Step 2 of Direct Code Entry Then enter any VCR code in Step 3 of Direct Code Entry Then follow the
15. steps above for Code Search Note Ifthe device does not have CHANNEL UP button use PLAY VCR only or POWER instead Code search begins from the currently stored 4 digit number under that mode Code Identification Feature The Code Identification Feature lets you identify the 4 digit library code stored under your device key If you want to find what 4 digit code is stored under any device mode follow these steps 1 Press and hold SETUP until the indicator remains on then release SETUP 2 Repeatedly press SELECT to select the desired mode TV VCR etc unless the desired mode is already selected Press and release SETUP The indicator blinks To find the first digit for the code stored under the mode selected in Step 2 press each number button 0 9 When the indicator blinks off the number you pressed 15 the first code digit you are searching for 5 To find the second digit repeat Step 4 When the indicator blinks off this is the second digit 6 Repeat Step 4 to find the third and fourth digits 9 SG Setting Favorites The Favorites feature is what really sets this remote apart from other remotes It lets you go to your favorite channel s by simply pressing a button next to a sticker or label that represents that favorite channel 1 Press and hold SETUP until the indicator remains on then release SETUP 2 Repeatedly press SELECT to select the desired mode TV VCR etc
16. through transmit or hand over control from any mode pro grammed with TV or Cable codes to the last VCR DVD or DVR mode used For example if you have2 DVD VCR or DVR devices programmed into this remote the last device you used controls the 6 VCR buttons Note This feature will not operate if the programmed TV SAT or Cable code has its own VCR transport button control e g a TV Combo SAT PVR etc Volume Mute Control and Punch Through Feature Your remote allows you to select which device mode controls VOLUME and MUTE This remote is initially set for all device modes to use their own Volume Mute control if present If the programmed code does not have Volume Mute operation then VOLUME and MUTE will punch through hand over control to the TV mode device without you needing to change to TV mode Note Any mode chosen for Volume Mute control must have its own Volume Mute function or else VOLUME and MUTE will not function 1111 8 Setup cont Setting ALL Volume Mute Controls to Any Mode You can set all modes to punch through to any mode for Volume Mute control without needing to change to that mode by doing the following 1 Press and hold SETUP until the indicator remains on then release SETUP 2 Press and hold MUTE until the indicator blinks off then release the button 3 Press and release SELECT to select the desired mode TV VCR etc for Volume Mute control the indicat
17. unless the desired device is already selected This sets the device that this favorite button controls Press one ofthe 10 FAVORITE buttons to set up a favorite channel Let s say we select the top right hand FAVORITE button 4 Enter the channel number for this favorite channel Note You can use up to 5 buttons including 0 through 9 OK and to enter your favorite channel 550 472Enter 162OK 5 7 etc are examples 5 Press SETUP when yov ve finished entering the channel After setting up your favorite do the following 6 Attach the sticker that represents the favorite channel you set up above to the location next to that FAVORITE button In the example on p 11 we ve used a CNN sticker for the top right hand FAVORITE button Follow Steps 1 through 6 to set up more favorites each time selecting a different FAVORITE button in Step 3 and entering a different channel number in Step 4 Then place the appropriate sticker next to the FAVORITE button as in Step 6 To go to your favorite channel simply press the FAVORITE button next to the sticker that represents the icon for that channel 1111 2 Setting Favorites cont VCR DVD CBL AUX FAVORITE buttons FAVORITE icons ee ate OO OC Guide Input Info OOO OF O O PR SA REET SETUP UAM G VibEO 2 96 4
18. ys DVD Title Menu screen MENU Brings up the device Menu screen if available use with UP DOWN LEFT and RIGHT navigation buttons UP DOWN LEFT RIGHT Navigation buttons VOLUME UP DOWN Changes the volume level of the product normally the TV MUTE Turns offthe TV sound while the picture remains CC SUBTITLE TV Closed Caption if your TV has this feature or DVD Subtitle toggle LAST REPEAT Returns to the previously selected channel or DVD repeat toggle 100 Used for channels greater than 100 used for digital channels like 2 3 SCAN REVERSE Reverses through a chapter or title REC STOP PAUSE PLAY VCR controls SCAN FAST FORWARD Fast forwards through a chapter or title ENT Used after direct channel number entry to change to the selected channel immediately NUMBERS Enter numbers for direct channel selection Some products require ENT to be pressed after channel selection SETUP Initializes setup of remote and devices LEARN Used to setup learning functions OK Selects menu items for the device you are controlling CHANNEL UP DOWN Changes the channels CHAPTER controls DVD CD track selection Note VCR buttons also control DVD when in DVD mode EXIT Exits on screen menus returns to previous on screen selection INFO Displays selects on screen channel information etc INPUT For some TVs press repeatedly to select from available viewing s
Download Pdf Manuals
Related Search