Whirlpool WRL767SIAM Dimension Guide
Contents
1. PRODUCT DIMENSIONS A handle incl handle D overall P F LA i 90 90 ae aea l T l Ss may vary based on style of door handle The depth for the largest available handle is listed Dimensions C and D include leveling legs extended 3 4 1 9 cm Depth Depth F Model Depth w Handle Cab Overall Cab with Doors Model Size A B Height C Height D Width E Open 90 33 36 68 69 4 35 76 50 VEN AD EN 85 09 cm 91 44 cm 174 31 cm 175 90 cm 90 01 cm 129 22 cm To ensure proper ventilation for your refrigerator allow for 1 25 cm of space on each side and at the top Allow for 1 2 54 cm of space behind the refrigerator If your refrigerator has an ice maker allow extra space at the back for the water line connections When installing your refrigerator next to a fixed wall leave a 2 5 08 cm minimum space on each side depending on your model to allow the doors to swing open Normal minimum cabinet cut out width required for product installation is 36 91 44 cm However if the product is placed against an extended wall and the ability to remove the crisper pans is desired an additional 18 45 72 cm of cabinet width is required so a total cabinet opening width of 54 137 16 cm is recommended NOTE This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55 F 12. e Whirlpool Side by Side Refrigerator PRODUCT MODEL NUMBERS WRL767SIA Electrical A 115 Volt 60 Hz AC only 15 or 20 amp fused grounded electrical supply is required It is recommended that a separate circuit serving only your refrigerator be provided Use an outlet that cannot be turned off by a switch Do not use an extension cord NOTE Before performing any type of installation or cleaning or removing a light bulb turn cooling off or turn the Refrigerator or Freezer Control depending on the model to OFF and then disconnect the refrigerator from the electrical source When you are finished reconnect the refrigerator to the electrical source and turn cooling on or reset the Refrigerator or Freezer Control depending on the model to the desired Setting Water A cold water supply with water pressure between 30 and 120 psi 207 and 827 kPa is required for the water dispenser and ice maker IMPORTANT The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi 207 and 827 kPa If a reverse osmosis water filtration system is connected to your cold water supply the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi 276 to 414 kPa LOCATION REQUIREMENTS ial 2 5 08 cm Because Whirlpool Corporation policy includes a continuous commitment to improve not incl
3. 3 C to a maximum of 110 F 43 C The preferred room temperature range for optimum performance which reduces electricity usage and provides superior cooling is between 60 F 15 C and 90 F 32 C It is recommended that you do not install the refrigerator near a heat source such as an oven or radiator Dimensions are for planning purposes only For complete details see Installation Ref W10439277C Our products we reserve the right to change materials and specifications without notice Instructions packed with product Specifications subject to change without notice 9 3 13
Download Pdf Manuals
Related Search