Whirlpool Dishwasher ADG 7470 User's Manual
Contents
1. treated as household waste but must be delivered to the nearest collection centre for the recycling of electrical and electronic appliances Disposal must be carried out in accordance with local environmental regulations for waste disposal For further information on the treatment recovery and recycling of this appliance contact your competent local authority the collection service for household waste or the shop where you purchased the appliance EC Declaration of conformity This appliance has been designed constructed and distributed in compliance with the safety requirements of EC Directives G 2006 95 CE 89 336 CE 93 68 CE and 2002 95 CE RoHS Directive Loading Capacity 12 place settings2. indicator lamp flashes Xx times Many different causes Reset the appliance see below RESET gt After taking the above course of action the fault message must be reset In the majority of cases the fault is thus eliminated Press the START button for approx 2 seconds until the indicator lamp switches off or press the RESET button depending on model Close the door gt Water drains automatically for up to 60 seconds gt The appliance is now ready to be restarted Crockery and cutlery Possible causes Solutions are not perfectly clean have food residues Too little space between dishes incorrect arrangement of the concave items in the rack Too little detergent detergent too old or incorrectly stored Arrange crockery so that items do not touch each other Concave items e g bowls cups must be arranged facing downwards in the rack If necessary use more detergent observing the manufacturer s indications as regards dosage Always store detergent in a dry place and do not store it for excessively long periods of time Temperature not high enough for heavily soiled crockery Loading of the dishwasher using lower and upper rack at the same time with Half load Multizone option For heaxily soiled crockery select a wash programme with a higher temperature see table of programmes on page 1 If you select the Half load Multizone option if available remember to l
3. pots must be placed in a correct way to let water flow down Switching on the appliance GB 4 Select programme Quick permanent or alternating Overview of programmes 6 The max possible number of programmes is illustrated in the chapter Chart The corresponding programmes for your appliance can be found on the panel page 1 GD Choose programme according to the attached table of programmes page 1 G Duration of the programme depends on the external conditions in the apartment temperature and pressure etc Wash cycle The dishwasher door must be closed and the water tap open Change the programme in progress 7 To load crockery open the door with caution e Press the START button for 2 seconds until the START indicator lamp Beware of hot steam whens oie z e Close the door Close the door again e Water drains for up to 60 seconds The programme resumes the cycle from where it was interrupted e Open the door i 3 7 3 e Select anew programme GD The wash cycle can be interrupted at any time by pressing START see chapter What to do if Palpres ithe START button Switch off the appliance Everything o k 8 Exercise caution when opening the door beware of hot steam Only press the OFF button once the START indicator lamp has switched off All the indicator lamps switch off Unload the appliance starting from the lower rack in order to avoid any residual dr
4. Quick reference guide Olas ae PROGRAMME SELECTION BUTTON BEFORE USING THE APPLIANCE FOR THE Press button P repeatedly until the indicator of the required programme lights up see Table of FIRST TIME CAREFULLY READ THIS QUICK programmes below REFERENCE GUIDE AND THE ASSEMBLY a INSTRUCTIONS THE JARANTEE IS NOT Whirlpool APPLICABLE IF FAULT RE CAUSED BY INCORRECT USE OF THE APPLIANCE START BUTTON The indicator lights up during operation flashes when a fault occurs and goes off at the end of the programme START BUTTON RESET FUNCTION Press this button for at least 2 seconds the selected programme and options are cancelled Main failure displays repeated flashing of the START indicator lamp can be cancelled by RESETTING Detailed instructions are given in chapter What to do if Table of programmes Consumption P Programmes Loading instructions Litres kWh minutes 1 thy Pre Wash cold Crockery to be washed later 5 0 0 02 10 SJ Lightly soiled crockery with no 2 N Quickwash 40 C dried on food Use of tablets 13 0 0 70 30 not recommended 3 QECO Eco 2 50 C Normally soiled crockery 15 0 105 165 7 Energy saving programme Recommended programme for 4 Intensive 70 C heavily soiled crockery especially 17 0 1 65 145 suitable for pots and pans 1 Programme data obtained in conformity with European standard EN 50242 obtained under normal cond
5. ble flaps In horizontal position for cups long utensils In some models only A Multipurpose support Different positions for long in raised position for plates and stemware C Cutlery basket It can be placed in the upper rack when the utensils cups and glasses Half load Multizone option is selected D Adjustable glass holder How to adjust upper rack height if available It could be useful to lift up upper rack to have more space in lower rack or bring it down to load long stem glasses Grasp and take out the two lateral handles E must be on same level and lift up or take down the upper rack How to remove upper rack if available It could be useful to remove upper rack to load bulky items in lower rack Open the two retainers F to take off the upper rack When the upper rack is in place the retainers must always be closed How to load LOWER RACK depending on the mode G Foldable plate holders They can be folded down to load pots or H Fixed plate holders I Cutlery basket or J model K Grid Helps to keep the cutlery separate for better washing results Arrange crockery so that water does not collect in cavities ensuring that the spray arms turn freely Only use dishwasher proof crockery and dishes Do not use the dishwasher for washing wooden items aluminium tin silver cutlery or decorated crockery unglazed In the baskets dishes e g plates bowls
6. ctive enough at 10 spray arms 35 7 44 1 Very hard 6 6x Seite alae te Ree Hee 44 8 74 9 Extremely hard 7 7x GB 2 Filling the salt reservoir Dissolve limescale not necessary if water hardness level is set to soft Visual indicator Fill the salt Add salt Visual indicator depending depending reservoir with never add on model Screw on the cap on model water before the detergent Salt S zame cap i t Unscrew cap first wash only min 1 5 kg need to be remo mex 2 kg Salt indicator depending on the model The salt level indicator lamp may remain lit for the duration of several wash cycles If the water hardness level falls within category soft no salt is required dear NEEDSTO BE ADDED gt Cc The indicetor lamp on the control pane lights S Ore t up when SALT NEEDSTO BE ADDED Adding rinse aid not necessary when you use tablets How to adjust the rinse aid dosage regulat Visual indicator The rinse aid dosage can be adjusted to the detergent used The lower the setting the less rinse aid is dispensed factory setting position 4 a 7 Press the button to open the cover B Usinga AJ B If Eana coin or similar object turn the arrow to the F S ia CONST Add rinse aid desired setting After adjusting the rinse aid 4 ene rignt to the max setting shut the cover aga
7. e following the description of the fault the appliance type and model the service code the number indicated on the adhesive rating plate inside the door on the right hand side TM Precautions and general recommendations L Packing The packaging materials are 100 recyclable and marked with the recycling symbol 2 Removing the packaging and inspecting the contents After unpacking make sure that the dishwasher is undamaged and that the door closes correctly If in doubt contact a qualified technician or your local retailer 3 Before using the dishwasher for the first time The appliance is designed to operate at ambient temperatures of between 5 C and 45 C This dishwasher has been tested by the manufacturer to ensure it functions correctly Such testing may leave slight drips water marks which will disappear with the first wash Energy and water savings Do not rinse crockery under running water Always fully load the dishwasher before running it or select the Half load Multizone option if available If ecological energy sources are available such as solar panel heating heat pumps or centralised heating systems the appliance may be connected to the hot water mains up to a maximum temperature of 60 C Make sure the water inlet hose is of the correct type 70 C Max or 90 C Max Child safety Keep the packaging materials out of the reach of children Children must not be all
8. hen tablets are used How to set water hardness Switch on the appliance Select the 2nd programme P2 consult the table of programmes Press the START button for at least 5 seconds until the START indicator lamp flashes The water hardness setting is shown on the display if present or the START button flashes With each successive touch of the START button the setting increases and when it reaches 7 it returns to 1 again The appliance must be switched off to memorise the new setting only before the first wash or if the 5 water hardness has been changed 1 Ask your water supply company whet 2 enter this value on your dishwasher Suggestions for detergent use the water hardnessis i 4 Dishwasher without English Water E eA display count Gel or Powder Tablets J degrees eH hardness R eo START button led rinse aid and salt Water hardness level is factory set for 7 flashes medium hard water a number 4 is 1 salt reservoir Dres se x shown on the display or the START 2 rinse aid dispenser indicator lamp flashes 4 times 3 deter di 7 126 Medium 2 2x 4 racks system 13 3 18 9 Average 3 3x r y aw eee oe gp to step 1 if extra salt is Even if you use tablets which include salt 5 6 7 8 available functions on the panel 19 6 25 9 Medium hard 4 4x e Ddy nk v ae e E filters 26 6 35 Hard 5 5x x detergents are not effe
9. in line 150 m Rinse aid indicator depending on model ADDED The indicator lamp on the control panel lights up when RINSE AID NEEDSTO BE p O AROR clear NEEDSTO BE ADDED Only use rinse aids recommended for use in domestic dishwashers Immediately wipe away any rinse aid spilt accidentally This prevents the formation of excess suds which can cause a fault function of the appliance setting will not improve the situation Detergents with rinse aid incorporated may be effective only with longer programmes In the case of shorter programmes detergent residue may be a problem if necessary use powder detergent Detergents with rinse aid incorporated tend to form excess suds GD If there are streaks reduce the dosage by turning the dial to a lower setting 1 3 If crockery is not perfectly dry increase the dosage by turning the dial to a higher setting 5 6 Plastic dishes have more difficulty drying and a higher rinse aid Use only one tablet per one cycle only placed in detergent Openthe coverA Only fill the dispenser By pressing press left button detergent dispenser dedicated ribs prior to startinga All types of tablets can be shut the cover wash programme used but for 2 in 1 type adding of salt is mandatory 2CLICK GB How to load UPPER RACK How to load the racks In some models only B Adjusta
10. inlet and outlet hoses and let all the water drain away Make sure there is at least 1 kg of dissolved regeneration salt in the salt reservoir to protect the appliance from temperatures of up to 20 C When the programme resumes an error message may be displayed F1 START indicator flashes once pour half a litre of warm water into the bottom of the dishwasher F6 START indicator flashes 6 times the appliance must remain at an ambient temperature of min 5 C for at least 24 hours After eliminating these faults RESET the appliance see chapter What to do if 8 Disposal The appliance is manufactured using recyclable materials If you decide to scrap the dishwasher it must be disposed of in compliance with local waste disposal regulations Make it unusable by cutting off the power cord To prevent situations of potential danger to children e g danger of suffocation break the lock of the door so that it can no longer be closed This appliance is marked according to the European directive 2002 96 CE on Waste Electrical and Electronic Equipment WEEE By ensuring that this appliance is scrapped suitably you can help prevent potentially damaging consequences for the environment and health Unsuitable disposal of an appliance of this type as household waste could have detrimental effects on the environment The symbol onthe appliance or on documentation enclosed with the appliance indicates that this product must not be
11. ips of water falling onto crockery below Mainten al car Screw on filter cylinder NOTE MARK Unscrew filter cylinder remove it Unscrew Clean spray and remove nozzles under lower arm running water cer use toothpicks if ar ecessary ES 1 If a fault occurs before contacting the After sales Service make the following checks to try and remedy the problem Most faults can be remedied by taking the following courses of action quickly restoring normal appliance operation The appliance is not working will not start Possible causes The appliance must be switched on Solutions Check the household circuit fuse if there is no power supply The dishwasher door doesn t close Check if the dishwasher s door is closed Delayed start option is ON Check whether the Delayed start option if available has been selected If it has the appliance will only start once the set time has elapsed If necessary set the delayed start to O RESET the appliance Shows F1 on the display or the START indicator lamp flashes once The water supply temperature is below 3 C Check that the water supply temperature is above 3 C Shows F4 on the display or the START i
12. itions without additional options and may vary depending on conditions Differences of up to 20 minutes are possible with sensor programmes as a result of the appliance s automatic calibration system 2 Reference programme for energy label in compliance with EN 50242 regulations Note for Testing Institutes for detailed information on the EN Standard loading comparison test and other tests contact the following address nk_customer whirlpool com 5019 396 01787 Whirlpool is a registered trademark of Whirlpool USA et if option is available First time use In order to always ensure the best cleaning results you NEED to set DETERGENT type and WATER HARDNESS 1 Select 3rd programme 2 PressSTART button ff 3a Check your 3b and set it on your dishwasher 4 Remember to use salt and rinse 5 Switch off and switch on again to save setting see Table of programmes for 7 seconds detergent type using the START button aid when needed as indicated page 1 as per table below below Dishwasher models Detergent types model without 7 A display mode with display Powder or gel 3h 6h 9h n A A factory setting ses GFF no symbol add salt add rinse aid add salt Tablet 2 in1 eoo 8 7 a Tablet 3in 1 oeo g J Tablet All in 1 ooe 4 1 For models without detergent type option the salt and rinse aid indicators will be lit w
13. nbow effect This phenomenon is irreversible We recommend in future Change the control of system of dosage of softener Becareful follow recommended detergent dosage For combined action tablets see detergent producer s recommendations tea cups darken and dirt does not di fi hing in dist i This phenomenon is inevitable Theine alters colours permanently rust marks Salty or acidic food residues can cause rust marks even on stainless steel cutlery To avoid this always use a OCS TO the pre wash programme if the dishes are to be washed later other marks Inthe presence of marks increase the rinse aid dosage see page 3 Adding rinse aid If you use a Rinse aid dosage too low combined action detergent try adding more rinse aid Streaks is fs Inthe presence of streaks reduce the rinse aid dosage see page 3 Adding rinse aid If you use a FIRES ETeIG Ses sto hih combined action detergent which includes rinse aid do not add any additional rinse aid Suds Unsuitable dosage of detergent rinse aid Only use the amount of detergent rinse aid required since excessive amounts can lead to excess suds Disconnect the mains plug Whcet to do if If after carrying out the above checks the fault persists disconnect the mains plug and turn off the water tap Contact the After sales Service see warranty Before contacting our After Sales Service take note of th
14. ndicator lamp flashes 4 times Dirty filters Clean the filters Kinked drain hose Syphon hose connection closed The drain hose must not be kinked The closure disk of the syphon hose connection must be removed Shows F6 on the display or the START indicator lamp flashes 6 times Water tap closed The water tap must be open Kinked water inlet hose or clogged inlet filters The water inlet hose must not be kinked and the relative inlet filter in the water tap connector must not be clogged Shows F7 on the display or the START indicator lamp flashes 7 times Water pressure too low The water tap must be fully open during water inlet minimum capacity 0 5 litres per minute Kinked water inlet hose or clogged inlet filters The water inlet hose must not be kinked and the relative inlet filter in the water tap connector must not be dirty Shows F8 on the display or the START indicator lamp flashes 8 times Dirty or clogged filters The filters must not be dirty or clogged Too little water in the dishwasher s water system Drain hose incorrectly fitted Concave items e g bowls cups must be arranged facing downwards in the rack The drain hose must be fitted correctly for high mounted appliances leave min 200 400 mm from the lower edge of the appliance see Assembly instructions Shows other F faults on the display or the START
15. normal Try of cycle e g when using delayed start option releasing the door 5 minutes before removing the dishes Incorrect arrangement of the concave items in the rack f Arrange crockery so that water does not collect in cavities Incorrect dosage the rinse aid Increase the dosage of rinse aid see page 3 Adding rinse aid The rapid programme is intended for quickly washing lightly soiled dishes If used for a full load of mediuny Rapid programme selected heavy soiled dishes the dishes may not dry completely If so select a standard length programme For best results open the door after the end of the programme and wait 15 minutes before unloading the dishwasher have discoloured plastic parts Tomato sauce for example can lead to discolouring of plastic parts Powder detergent is recommended as Tormato Carrot juice it allows slightly higher doses to be used for improved whitening Programmes with higher wash temperatures should be used Opaque glasses etc Dishes unsuitable for washing in dishwashers Only use dishw proof crockery and ci porcelain removable deposits on glasses uU of incorrect progr ford Dishes should be put together to avoid touching each other Do not put glassware together in baskets 9 Use suitable programme for gass glasses not sparkling eo of glasses to washing in dishwashers Some kinds of gass cannot be w in the dishw permanent deposits on glasses Rai
16. oad o the upper rack or O the lower rack to increase washing power and thus obtain optimum wash results Frequent use of Eco 50 C In the event of frequent use of the Eco 50 C programme if available from time to time select the Intensive 70 C programme if available Clogged spray arms filters dirty or not fitted correctly Spray arms impeded by crockery or cutlery The spray arms must not be clogged the filters must not be dirty and must be fitted correctly see page 5 Maintenance and care The spray arms must be able to turn freely and must not be impeded by crockery or cutlery Crockery and cutlery Possible causes Solutions Salt indicator lit Use tablets for soft water Set Detergent type option if this option is not available it is normal for the salt indicator to light up have deposits regeneration salt residue gt Water too hard bay seh very hard water more regeneration salt needs to be added see page 2 How to set water Salt reservoir cap open Close the salt reservoir cap properly Not enough rinse aid If you use a combined action detergent try adding more rinse aid are not dry Plastic containers dry badly Synthetic materials do not dry well if wet at end of cycle wipe dry Clean dishes left in dishwasher for along time after end f In this situation the presence of drops of water on dishes and on the sides of the dishwasher is
17. owed to play with the dishwasher Store the detergent rinse aid and salt out of the reach of children Safety warnings The appliance is not intended for use by children or physically or mentally impaired persons unless adequately supervised by a responsible adult capable of guaranteeing safe use of the appliance Do not operate the appliance in the open air Do not store flammable materials in close proximity to the dishwasher The water in the dishwasher is not potable Do not use solvents inside the dishwasher risk of explosion Be careful when the door is open risk of tripping The open dishwasher door can only support the weight of the loaded rack when pulled out Do not rest objects on the open door or sit or stand on it Sharp items that might cause injury e g knives must be placed in the cutlery basket with the sharp end facing downwards Long handled utensils must be arranged horizontally in the upper rack with the sharp end facing away from the front of the appliance We reserve the right to make technical modifications cB 8 Before cleaning or carrying out maintenance disconnect the mains plug and turn off the water tap also in the event of any malfunction Repairs and technical modifications must be carried out exclusively by a qualified technician 7 Resistance to frost If the appliance is placed in surroundings exposed to the risk of frost it must be drained completely Turn off the water tap remove the
Download Pdf Manuals
Related Search